CRYSTALLINE/CRYSTALLINE POLYMER BLENDS: SOME STRUCTURE-PROPERTY RELATIONSHIPSSIEGMANN A.1979; J. APPL. POLYM. SCI.; USA; DA. 1979; VOL. 24; NO 12; PP. 2333-2345; BIBL. 31 REF.Article

EFFECT OF METAL HALIDES ON THE GLASS TRANSITION TEMPERATURE OF NYLON-6SIEGMANN A; BARAAM Z.1980; MAKROMOL. CHEM., RAPID COMMUN.; CHE; DA. 1980; VOL. 1; NO 2; PP. 113-117; BIBL. 20 REF.Article

MELTING AND CRYSTALLIZATION OF POLY (ETHYLENE TEREPHTHALATE) UNDER PRESSURESIEGMANN A; HARGET PJ.1980; J. POLYM. SCI., POLYM. PHYS. ED.; ISSN 0098-1273; USA; DA. 1980; VOL. 18; NO 11; PP. 2181-2196; BIBL. 43 REF.Article

STRUCTURAL CHANGES IN GLASSY POLY(ETHYLENE TEREPHTHALATE)SIEGMANN A; TURI E.1974; J. MACROMOL. SCI., B; U.S.A.; DA. 1974; VOL. 10; NO 4; PP. 689-708; BIBL. 23 REF.Article

SMALL-ANGLE X-RAY SCATTERING FROM AMORPHOUS POLYETHYLENE TEREPHTHALATEHARGET PG; SIEGMANN A.1972; J. APPL. PHYS.; U.S.A.; DA. 1972; VOL. 43; NO 11; PP. 4357-4362; BIBL. 14 REF.Serial Issue

MELTING AND CRYSTALLIZATION OF NYLON 6 CONTAINING COPPER CHLORIDESIEGMANN A; BARAAM Z.1980; J. APPL. POLYM. SCI.; USA; DA. 1980; VOL. 25; NO 6; PP. 1137-1143; BIBL. 17 REF.Article

THERMAL ANALYSIS OF THERMOSETTING PHENOLIC COMPOUNDS FOR INJECTION MOLDING.SIEGMANN A; NARKIS M.1977; J. APPL. POLYM. SCI.; U.S.A.; DA. 1977; VOL. 21; NO 9; PP. 2311-2318; BIBL. 9 REF.Article

NYLON-6 CONTAINING METAL HALIDES. II: TENSILE PROPERTIESSIEGMANN A; BARAAM Z.1981; POLYM. ENG. SCI.; ISSN 0032-3888; USA; DA. 1981; VOL. 21; NO 4; PP. 223-226; BIBL. 16 REF.Article

NYLON-6 CONTAINING METAL HALIDES. I: MELTING AND CRYSTALLIZATIONSIEGMANN A; BARAAM Z.1980; INT. J. POLYM. MATER.; ISSN 0091-4037; USA; DA. 1980; VOL. 8; NO 4; PP. 243-253; BIBL. 26 REF.Article

RESIDUAL STRESSES IN POLYMERS. I: THE EFFECT OF THERMAL HISTORYSIEGMANN A; BUCHMAN A; KENIG S et al.1982; POLYM. ENG. SCI.; ISSN 0032-3888; USA; DA. 1982; VOL. 22; NO 1; PP. 40-47; BIBL. 29 REF.Article

SOFTENING TEMPERATURE OF GLASSY POLYMERS AS AFFECTED BY RESIDUAL STRESSESSIEGMANN A; NARKIS M; ROSENZWEIG N et al.1979; POLYM. ENGNG SCI.; USA; DA. 1979; VOL. 19; NO 3; PP. 223-225; BIBL. 13 REF.Article

SOLID SOLUTIONS AND PRECIPITATION IN FLAME RETARDANT POLYSTYRENE-TETRABROMOXYLENE SYSTEMSSIEGMANN A; NARKIS M; DAGAN A et al.1974; POLYMER; G.B.; DA. 1974; VOL. 15; NO 8; PP. 499-502; BIBL. 9 REF.Article

RESIDUAL STRESSES IN POLYMERS. III: THE INFLUENCE OF INJECTION-MOLDING PROCESS CONDITIONSSIEGMANN A; BUCHMAN A; KENIG S et al.1982; POLYM. ENG. SCI.; ISSN 0032-3888; USA; DA. 1982; VOL. 22; NO 9; PP. 560-568; BIBL. 25 REF.Article

PRECIPITATION FROM GLASSY POLYMER SOLUTIONS.NARKIS M; SIEGMANN A; DAGAN A et al.1977; J. APPL. POLYM. SCI.; U.S.A.; DA. 1977; VOL. 21; NO 4; PP. 989-996; BIBL. 10 REF.Article

MECHANISM OF LOW PROFILE BEHAVIOR IN UNSATURATED POLYESTER SYSTEMS.SIEGMANN A; NARKIS M; KOST J et al.1978; INTERNATION. J. POLYM. MATER.; G.B.; DA. 1978; VOL. 6; NO 3-4; PP. 217-231; BIBL. 12 REF.Article

RESIDUAL STRESSES IN POLYMERS. II: THEIR EFFECTS ON MECHANICAL BEHAVIOURSIEGMANN A; BUCHMAN A; KENIG S et al.1981; POLYM. ENG. SCI.; ISSN 0032-3888; USA; DA. 1981; VOL. 21; NO 15; PP. 997-1002; BIBL. 27 REF.Article

GLASSY POLYMER SOLUTIONS: SOME MORPHOLOGY-PROPERTY RELATIONSHIPS.SIEGMANN A; NARKIS M; PUTERMAN M et al.1979; POLYMER; GBR; DA. 1979; VOL. 20; NO 1; PP. 89-93; BIBL. 9 REF.Article

GLASSY POLYMER SOLUTIONS: MORPHOLOGY OF IN SITU CRYSTALLIZED ADDITIVESNARKIS M; SIEGMANN A; PUTERMAN M et al.1979; J. POLYM. SCI., POLYM. PHYS. ED.; USA; DA. 1979; VOL. 17; NO 2; PP. 225-234; BIBL. 9 REF.Article

Mechanism of damage and failure in an orthotropic glass/polypropylene compositeKANDER, R. G; SIEGMANN, A.Polymer composites. 1992, Vol 13, Num 3, pp 154-168, issn 0272-8397Article

In situ acoustic emission monitoring and mechanical testing in the scanning electron microscopeSIEGMANN, A; KANDER, R. G.Journal of materials science letters. 1991, Vol 10, Num 11, pp 619-621, issn 0261-8028Article

Impact modification of poly(vinyl chloride) with chlorinated polyethylene. I: Blend morphologySIEGMANN, A; HILTNER, A.Polymer engineering and science. 1984, Vol 24, Num 11, pp 869-876, issn 0032-3888Conference Paper

CONTROLLED RELEASE OF PROPHAM FROM PLASTIC GRANULES.SIEGMANN A; TIROSH N; NARKIS M et al.1978; J. APPL. POLYM. SCI.; U.S.A.; DA. 1978; VOL. 22; NO 4; PP. 1015-1020; BIBL. 10 REF.Article

Simultaneous residual stresses and crystallinity changes during ageing of polyoxymethyleneSIEGMANN, A; KENIG, S.Journal of materials science letters. 1986, Vol 5, Num 12, pp 1213-1215, issn 0261-8028Article

Chemical Sensing Materials. I. Electrically Conductive SEBS Copolymer SystemsPAVLOVSKY, S; SIEGMANN, A.Journal of applied polymer science (Print). 2009, Vol 113, Num 5, pp 3322-3329, issn 0021-8995, 8 p.Article

Chemical Sensing Materials II: Electrically Conductive Peroxide Crosslinked SEBS Copolymers SystemsPAVLOVSKY, S; SIEGMANN, A.Journal of applied polymer science (Print). 2009, Vol 114, Num 3, pp 1390-1396, issn 0021-8995, 7 p.Article