Mechanical properties of the weld line defect in micro injection molding for various nano filled polypropylene compositesLEI XIE; ZIEGMANN, Gerhard.Journal of alloys and compounds. 2011, Vol 509, Num 2, pp 226-233, issn 0925-8388, 8 p.Article

A visual mold with variotherm system for weld line study in micro injection moldingLEI XIE; ZIEGMANN, Gerhard.Microsystem technologies. 2008, Vol 14, Num 6, pp 809-814, issn 0946-7076, 6 p.Article

Visualizing analysis for weld line forming in micro injection molding by experimental methodLEI XIE; ZIEGMANN, Gerhard.Microsystem technologies. 2009, Vol 15, Num 6, pp 913-917, issn 0946-7076, 5 p.Article

Influence of processing parameters on micro injection molded weld line mechanical properties of polypropylene (PP)LEI XIE; ZIEGMANN, Gerhard.Microsystem technologies. 2009, Vol 15, Num 9, pp 1427-1435, issn 0946-7076, 9 p.Article

Effect of micro tensile sample's cross section shape on the strength of weld line in micro injection molding processLEI XIE; ZIEGMANN, Gerhard; HLAVAC, Marcus et al.Microsystem technologies. 2009, Vol 15, Num 7, pp 1031-1037, issn 0946-7076, 7 p.Article

A mechanism influencing micro injection molded weld lines of hybrid nano filled polypropyleneLEI XIE; KIRCHBERG, Stefan; STEUERNAGEL, Leif et al.Microsystem technologies. 2010, Vol 16, Num 11, pp 1855-1859, issn 0946-7076, 5 p.Article

Reinforcement of micro injection molded weld line strength with ultrasonic oscillationLEI XIE; ZIEGMANN, Gerhard; BINGYAN JIANG et al.Microsystem technologies. 2010, Vol 16, Num 3, pp 399-404, issn 0946-7076, 6 p.Article

Influence of textile preforming binder on the thermal and rheological properties of the catalyzed cyclic butylene terephthalate oligomersWANGQING WU; LEI XIE; BINGYAN JIANG et al.Composites. Part B, Engineering. 2013, Vol 55, pp 453-462, issn 1359-8368, 10 p.Article

Fibre/matrix adhesion of cellulose fibres in PLA, PP and MAPP: A critical review of pull-out test, microbond test and single fibre fragmentation test resultsGRAUPNER, Nina; RÖSSLER, Joraine; ZIEGMANN, Gerhard et al.Composites. Part A, Applied science and manufacturing. 2014, Vol 63, pp 133-148, issn 1359-835X, 16 p.Article

Improvement and analysis of fibre/matrix adhesion of regenerated cellulose fibre reinforced PP-, MAPP- and PLA-composites by the use of Eucalyptus globulus ligninGRAUPNER, Nina; FISCHER, Holger; ZIEGMANN, Gerhard et al.Composites. Part B, Engineering. 2014, Vol 66, pp 117-125, issn 1359-8368, 9 p.Article

Simultaneous binding and ex situ toughening concept for textile reinforced pCBT composites: Influence of preforming binders on interlaminar fracture propertiesWANGQING WU; KLUNKER, Florian; LEI XIE et al.Composites. Part A, Applied science and manufacturing. 2013, Vol 53, pp 190-203, issn 1359-835X, 14 p.Article

Effect of physical vapor deposition metallic thin films on micro injection molded weld line mechanical propertiesLEI XIE; LEESTER-SCHÄDEL, Monika; ZIEGMANN, Gerhard et al.Microsystem technologies. 2010, Vol 16, Num 6, pp 1009-1013, issn 0946-7076, 5 p.Article

Influence of Particle Concentration and Type on Flow, Thermal, and Mechanical Properties of Wood—Polypropylene CompositesLEI XIE; GRUENEBERG, Timo; STEUERNAGEL, Leif et al.Journal of reinforced plastics and composites. 2010, Vol 29, Num 13, pp 1940-1951, issn 0731-6844, 12 p.Article

Metal/polymer/metal hybrid systems: Towards potential formability applicationsCARRADO, Adele; FAERBER, Jacques; NIEMEYER, Sonja et al.Composite structures. 2011, Vol 93, Num 2, pp 715-721, issn 0263-8223, 7 p.Article

Simulation of thermally induced stresses in glass-polymer compositesWONDRACZEK, Lothar; HEINZ FRISCHAT, Günther; HEIDE, Gerhard et al.Glass science and technology (Frankfurt). 2003, Vol 76, Num 3, pp 103-109, issn 0946-7475, 7 p.Article

Rheology of Natural Fibers Thermoplastic Compounds: Flow Length and Fiber DistributionAMNA YOUSSEF RAMZY; EL-SABBAGH, Ahmed Mohammed Moneeb; STEUERNAGEL, Leif et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 3, issn 0021-8995, 39861.1-39861.8Article

A novel approach to realize the local precise variotherm process in micro injection moldingLEI XIE; NIESEL, Thalke; LEESTER-SCHÄDEL, Monika et al.Microsystem technologies. 2013, Vol 19, Num 7, pp 1017-1023, issn 0946-7076, 7 p.Article

Processing parameters and characterisation of flax fibre reinforced engineering plastic composites with flame retardant fillersEL-SABBAGH, Ahmed; STEUERNAGEL, Leif; ZIEGMANN, Gerhard et al.Composites. Part B, Engineering. 2014, Vol 62, pp 12-18, issn 1359-8368, 7 p.Article

Curing Methods for Advanced Polymer Composites - A ReviewABLIZ, Dilmurat; YUGANG DUAN; STEUERNAGEL, Leif et al.Polymers & polymer composites. 2013, Vol 21, Num 6, pp 341-348, issn 0967-3911, 8 p.Article

Aspects in simulation of melting and impregnation processes of fibre reinforced thermoplasticsFRORMANN, Lars; FIDEU, Paulin; ZIEGMANN, Gerhard et al.Society for the Advancement of Material and Process Engineering. International SAMPE Europe conference. 2002, pp 435-443, isbn 3-9520477-9-1, 9 p.Conference Paper

Effect of Extruder Elements on Fiber Dimensions and Mechanical Properties of Bast Natural Fiber Polypropylene CompositesAHMED MOHAMMED MONEEB EL-SABBAGH; STEUERNAGEL, Leif; MEINERS, Dieter et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 12, issn 0021-8995, 40435.1-40435.15Article

Processing and Characterization of Injection Moldable Polymer-Particle Composites Applicable in Brazing ProcessesKIRCHBERG, Stefan; HOLLÄNDER, Ulrich; MÖHWALD, Kai et al.Journal of applied polymer science. 2013, Vol 129, Num 4, pp 1669-1677, issn 0021-8995, 9 p.Article

Aerosol Process for the In Situ Coating of Nanoparticles with a Polymer ShellPOOSTFOROOSHAN, Jalal; RENNECKE, Stephan; GENSCH, Manuel et al.Aerosol science and technology (Print). 2014, Vol 48, Num 10-12, pp 1111-1122, issn 0278-6826, 12 p.Article