ct.\*:("Forms of application and semi-finished materials")
Results 1 to 25 of 83212
Selection :
Condensed-Phase Flame Retardation in Nylon 6-Layered Silicate Nanocomposites : Films, Fibers, and FabricsSHANMUGANATHAN, Kadhiravan; DEODHAR, Sarang; DEMBSEY, Nicholas A et al.Polymer engineering and science. 2008, Vol 48, Num 4, pp 662-675, issn 0032-3888, 14 p.Article
Long term creep and stress rupture of aramid fibreFALLATAH, G. M; DODDS, N; GIBSON, A. G et al.Plastics, rubber and composites. 2007, Vol 36, Num 9, pp 403-412, issn 1465-8011, 10 p.Article
Preparation of Charged Mosaic Membrane of Sodium Polystyrene Sulfonate and Poly(4-vinyl pyridine) by Conjugate ElectrospinningYULU CHEN; YIMENG CUI; YUANSHAN JIA et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 17, issn 0021-8995, 40716.1-40716.9Article
ENGINEERED CALCIUM CARBONATE ADDING VALUE TO POLYOLEFIN FILM EXTRUSION AND NONWOVEN SPUNLAID PROCESSDANVERS, Julian; WHITEMAN, D; LEGRIX, A et al.International Conference Focusing on Fillers for Polymers. 2009, isbn 1-8473-5389-4 978-1-8473-5389-4, 1Vol, G1-G15Conference Paper
A methodology to orient carbon nanotubes in a thermosetting matrixLIONETTO, Francesca; CALO, Emanuela; DI BENEDETTO, Francesca et al.Composites science and technology. 2014, Vol 96, pp 47-55, issn 0266-3538, 9 p.Article
Antibacterial and Antifungal Dressings Obtained by Photochemical Deposition of Silver NanoparticlesPALADINI, Federica; DE SIMONE, Serena; SANNINO, Alessandro et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 11, issn 0021-8995, 40326.1-40326.8Article
Biocomposite membranes of highly methylated pectin and mesoporous silica SBA-15NESIC, Aleksandra R; KOKUNESOSKI, Maja J; ILIC, Svetlana M et al.Composites. Part B, Engineering. 2014, Vol 64, pp 162-167, issn 1359-8368, 6 p.Article
Biomineralized Polypropylene/CaCO3 Composite Nonwoven Meshes for Oil/Water SeparationKE LIAO; YE, Xiang-Yu; CHEN, Peng-Cheng et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 4, issn 0021-8995, 39897.1-39897.7Article
Characterization of bubble mobility in channel flow with fibrous porous media wallsGANGLOFF, John J; HWANG, Wook R; ADVANI, Suresh G et al.International journal of multiphase flow. 2014, Vol 60, pp 76-86, issn 0301-9322, 11 p.Article
Development of high void fraction polylactide composite foams using injection molding: Mechanical and thermal insulation propertiesAMELI, A; JAHANI, D; NOFAR, M et al.Composites science and technology. 2014, Vol 90, pp 88-95, issn 0266-3538, 8 p.Article
Effect of SiO2 on Rheology, Morphology, Thermal, and Mechanical Properties of High Thermal Stable Epoxy FoamKEPING CHEN; CHUNRONG TIAN; AI LU et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 7, issn 0021-8995, 40068.1-40068.7Article
Enhanced Gas Separation Properties of Metal Organic Frameworks/Polyetherimide Mixed Matrix MembranesCUIJIA DUAN; GUODONG KANG; DANDAN LIU et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 17, issn 0021-8995, 40719.1-40719.10Article
Enhancement of the Antibacterial Activity of Natural Rubber Latex Foam by the Incorporation of Zinc Oxide NanoparticlesRATHNAYAKE, W. G. I. U; ISMAIL, H; BAHARIN, A et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 1, issn 0021-8995, 39601.1-39601.8Article
Fabrication and Characterization of In Situ Synthesized Iron Oxide-Modified Polyimide Nanoweb by Needleless ElectrospinningJAIN, Naintara; CHAKRABORTY, Joy; SANTOSH KUMAR TRIPATHI et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 12, issn 0021-8995, 40432.1-40432.10Article
Fabrication and Characterization of PLA/PHBV-Chitin Nanocomposites and Their FoamsQI GUAN; NAGUIB, Hani E.Journal of polymers and the environment. 2014, Vol 22, Num 1, pp 119-130, issn 1566-2543, 12 p.Article
Fabrication and Mechanical Properties of Phenolic Foam Reinforced with Graphene OxideJINTANG ZHOU; ZHENGJUN YAO; YONGXIN CHEN et al.Polymer composites. 2014, Vol 35, Num 3, pp 581-586, issn 0272-8397, 6 p.Article
Facile Preparation of Superhydrophobic Polyester Surfaces with Fluoropolymer/SiO2 Nanocomposites Based on Vinyl Nanosilica HydrosolsLIHUI XU; ZAISHENG CAI; YONG SHEN et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 11, issn 0021-8995, 40340.1-40340.10Article
Factors controlling the strength of carbon fibres in tensionTANAKA, Fumihiko; OKABE, Tomonaga; OKUDA, Haruki et al.Composites. Part A, Applied science and manufacturing. 2014, Vol 57, pp 88-94, issn 1359-835X, 7 p.Article
Melt Spinning and Drawing of Polyethylene Nanocomposite Fibers with Organically Modified HydrotalciteFAMBRI, Luca; DABROWSKA, Izabela; PEGORETTI, Alessandro et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 10, issn 0021-8995, 40277.1-40277.13Article
Novel Amphiphilic Conetworks Based on Compatibilized NBR/SBR―Montmorillonite Nanovulcanizates as Membranes for Dehydrative Pervaporation of Water―Butanol MixturesESSAWY, Hisham; TAWFIK, Magda; EL-SABBAGH, Salwa et al.Polymer engineering and science. 2014, Vol 54, Num 7, pp 1560-1570, issn 0032-3888, 11 p.Article
Polystyrene/TiO2 composite electrospun fibers as fillers for poly(butylene succinate-co-adipate): Structure, morphology and propertiesNEPPALLI, Ramesh; CAUSIN, Valerio; BENETTI, Edmondo Maria et al.European polymer journal. 2014, Vol 50, pp 78-86, issn 0014-3057, 9 p.Article
Preparation and characterization of polyethersulfone/silver nanocomposite ultrafiltration membrane for antibacterial applicationsTOROGHI, Mohaddeseh; RAISI, Ahmadreza; AROUJALIAN, Abdolreza et al.Polymers for advanced technologies. 2014, Vol 25, Num 7, pp 711-722, issn 1042-7147, 12 p.Article
Preparation of Microfiltration Membranes with Controlled Pore Sizes by Interfacial Polymerization on Electrospun Nanofibrous MembranesCHEN, Jyh-Chien; WU, Jin-An; LIN, Kun-Hsien et al.Polymer engineering and science. 2014, Vol 54, Num 2, pp 430-437, issn 0032-3888, 8 p.Article
Thermal and mechanical properties of electrospun nano-celullose reinforced epoxy nanocompositesGABR, Mohamed H; PHONG, Nguyen T; OKUBO, Kazuya et al.Polymer testing. 2014, Vol 37, pp 51-58, issn 0142-9418, 8 p.Article
Effect of Organoclay on the Morphology, Mechanical, and Thermal Properties of Polyimide/Organoclay Nanocomposite FoamsKAILIANG QI; GUANGCHENG ZHANG.Polymer composites. 2014, Vol 35, Num 12, pp 2311-2317, issn 0272-8397, 7 p.Article