Merging neural network material rheological behaviour modelling with FEM simulation of orthogonal metal cuttingGIORLEO, G; TETI, R; PRISCO, U et al.Machining science and technology. 2003, Vol 7, Num 3, pp 401-417, issn 1091-0344, 17 p.Conference Paper

A finite element model of exit burrs for drilling of metalsSAUNDERS, L. Ken.Finite elements in analysis and design. 2003, Vol 40, Num 2, pp 139-158, issn 0168-874X, 20 p.Article

Finite element simulation of high-pressure water-jet assisted metal cuttingSHET, Chandrakanth; XIAOMIN DENG; BAYOUMI, Abdel E et al.International journal of mechanical sciences. 2003, Vol 45, Num 6-7, pp 1201-1228, issn 0020-7403, 28 p.Article

Anisotropy effects on microstructure and properties in decomposed arc evaporated Ti_1-xAl_xN coatings during metal cuttingJOESAAR, M. P. Johansson; NORRBY, N; ULLBRAND, J et al.Surface & coatings technology. 2013, Vol 235, pp 181-185, issn 0257-8972, 5 p.Article

Abrasive wear of texture-controlled CVD α-Al₂O₃coatingsFALLQVIST, M; OLSSON, M; RUPPI, S et al.Surface & coatings technology. 2007, Vol 202, Num 4-7, pp 837-843, issn 0257-8972, 7 p.Conference Paper

Modeling flank wear of carbide tool insert in metal cuttingLUO, X; CHENG, K; HOLT, R et al.Wear. 2005, Vol 259, Num 7-12, pp 1235-1240, issn 0043-1648, 6 p., 2Conference Paper

Modeling temperature of non-equidistant primary shear zone in metal cuttingFANGJUAN ZHOU; XUELIN WANG; YUJIN HU et al.International journal of thermal sciences. 2013, Vol 73, pp 38-45, issn 1290-0729, 8 p.Article

Cutting under active and inert gas shields: A contribution to the mechanics of chip flowCRISTINO, V. A. M; ROSA, P. A. R; MARTINS, P. A. F et al.International journal of machine tools & manufacture. 2010, Vol 50, Num 10, pp 892-900, issn 0890-6955, 9 p.Article

Revisiting the fundamentals of metal cutting by means of finite elements and ductile fracture mechanicsROSA, P. A. R; MARTINS, P. A. F; ATKINS, A. G et al.International journal of machine tools & manufacture. 2007, Vol 47, Num 3-4, pp 607-617, issn 0890-6955, 11 p.Article

Minimum quantity lubrication (MQL) applications in automotive power-train machiningFILIPOVIC, Aleksandar; STEPHENSON, David A.Machining science and technology. 2006, Vol 10, Num 1, pp 3-22, issn 1091-0344, 20 p.Article

Growth of the graded zone and its impact on cutting performance in high-pressure nitrogen modified functionally gradient hardmetalsKÖNIGSHOFER, Rudolf; EDER, Alexander; LENGAUER, Walter et al.Journal of alloys and compounds. 2004, Vol 366, pp 228-232, issn 0925-8388, 5 p.Article

Detailed analysis of microstructure of intentionally formed built-up edges for improving wear behaviour in dry metal cutting process of steelKÜMMEL, Johannes; GIBMEIER, Jens; MÜLLER, Erich et al.Wear. 2014, Vol 311, Num 1-2, pp 21-30, issn 0043-1648, 10 p.Article

Thrust force model for vibration-assisted drilling of aluminum 6061-T6CHANG, Simon S. F; BONE, Gary M.International journal of machine tools & manufacture. 2009, Vol 49, Num 14, pp 1070-1076, issn 0890-6955, 7 p.Article

The transient beginning to machining and the transition to steady-state cuttingROSA, P. A. R; KOLEDNIK, O; MARTINS, P. A. F et al.International journal of machine tools & manufacture. 2007, Vol 47, Num 12-13, pp 1904-1915, issn 0890-6955, 12 p.Article

Behaviour of Cu-Zn alloys in high speed shear tests and in chip formation processesHOFMANN, Uwe; EL-MAGD, Essam.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2005, Vol 395, Num 1-2, pp 129-140, issn 0921-5093, 12 p.Article

In situ investigation of laser ablationLENK, A; WITKE, T.Fresenius' journal of analytical chemistry. 1995, Vol 353, Num 3-4, pp 333-336, issn 0937-0633Conference Paper

Influence of the tool surface micro topography on the tribological characteristics in metal cutting: Part I experimental observations of contact conditionsFALLQVIST, M; SCHULTHEISS, F; M'SAOUBI, R et al.Wear. 2013, Vol 298-299, pp 87-98, issn 0043-1648, 12 p.Article

Influence of microstructure on wear behaviour of uncoated WC tools in turning of Alloy 718 and WaspaloyOLOVSJÖ, S; NYBORG, L.Wear. 2012, Vol 282-283, pp 12-21, issn 0043-1648, 10 p.Article

Bar diameter as an influencing factor on temperature in turningBOUD, F.International journal of machine tools & manufacture. 2007, Vol 47, Num 2, pp 223-228, issn 0890-6955, 6 p.Article

Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steelOUTEIRO, J. C; UMBRELLO, D; M'SAOUBI, R et al.International journal of machine tools & manufacture. 2006, Vol 46, Num 14, pp 1786-1794, issn 0890-6955, 9 p.Article

Microstructural analyses and wear behavior of the cemented carbide tools after laser surface treatment and PVD coatingNEVES, Davi; DINIZ, Anselmo Eduardo; FERNANDES LIMA, Milton Sérgio et al.Applied surface science. 2013, Vol 282, pp 680-688, issn 0169-4332, 9 p.Article

Pressure and temperature effects on the decomposition of arc evaporated Ti_0.6Al_0.4N coatings in continuous turningNORRBY, N; JOHANSSON, M. P; M'SAOUBI, R et al.Surface & coatings technology. 2012, Vol 209, pp 203-207, issn 0257-8972, 5 p.Article

Cutting forces and wear in dry machining of Inconel 718 with coated carbide toolsDEVILLEZ, A; SCHNEIDER, F; DOMINIAK, S et al.Wear. 2007, Vol 262, Num 7-8, pp 931-942, issn 0043-1648, 12 p.Article

Tool vibration detection with eddy current sensors in machining process and computation of stability lobes using fuzzy classifiersDEVILLEZ, Arnaud; DUDZINSKI, Daniel.Mechanical systems and signal processing. 2006, Vol 21, Num 1, pp 441-456, issn 0888-3270, 16 p.Article

Application of the EBSD technique for the characterisation of deformation zones in metal cuttingM'SAOUBI, R; RYDE, L.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2005, Vol 405, Num 1-2, pp 339-349, issn 0921-5093, 11 p.Article