Optimal wetting of active carbons for methane hydrate formationCELZARD, A; MARECHE, J. F.Fuel (Guildford). 2006, Vol 85, Num 7-8, pp 957-966, issn 0016-2361, 10 p.Article

Preparing a suitable material designed for methane storage: A comprehensive reportCELZARD, A; FIERRO, V.Energy & fuels. 2005, Vol 19, Num 2, pp 573-583, issn 0887-0624, 11 p.Article

Fluid flow in highly porous anisotropic graphitesCELZARD, A; MARECHE, J. F.Journal of physics. Condensed matter (Print). 2002, Vol 14, Num 6, pp 1119-1129, issn 0953-8984Article

Permeability and formation factor in compressed expanded graphiteCELZARD, A; MARECHE, J. F.Journal of physics. Condensed matter (Print). 2001, Vol 13, Num 20, pp 4387-4403, issn 0953-8984Article

Tortuosity studies of cellular vitreous carbon foamsLETELLIER, M; FIERRO, V; PIZZI, A et al.Carbon (New York, NY). 2014, Vol 80, pp 193-202, issn 0008-6223, 10 p.Article

Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Structure Determination of Complex Thermoset Networks : Polyflavonoid Tannin-Furanic Rigid FoamsPIZZI, A; TONDI, G; PASCH, H et al.Journal of applied polymer science (Print). 2008, Vol 110, Num 3, pp 1451-1456, issn 0021-8995, 6 p.Article

Mechanical properties of tannin-based rigid foams undergoing compressionCELZARD, A; ZHAO, W; PIZZI, A et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2010, Vol 527, Num 16-17, pp 4438-4446, issn 0921-5093, 9 p.Article

Analysis of gases emitted during carbonization degradation of polyflavonoid tannin/furanic rigid foamsTONDI, G; PIZZI, A; MASSON, E et al.Polymer degradation and stability. 2008, Vol 93, Num 8, pp 1539-1543, issn 0141-3910, 5 p.Article

Densification of expanded graphiteCELZARD, A; SCHNEIDER, S; MARECHE, J. F et al.Carbon (New York, NY). 2002, Vol 40, Num 12, pp 2185-2191, issn 0008-6223Article

Mayonnaise, whipped cream and meringue, a new carbon cuisineSZCZUREK, A; FIERRO, V; PIZZI, A et al.Carbon (New York, NY). 2013, Vol 58, pp 245-248, issn 0008-6223, 4 p.Article

Tannin-based carbon foamsTONDI, G; FIERRO, V; PIZZI, A et al.Carbon (New York, NY). 2009, Vol 47, Num 6, pp 1480-1492, issn 0008-6223, 13 p.Article

Physical Gelation of Water-Borne Thermosetting Resins by Percolation Theory : Urea-Formaldehyde, Melamine-Urea-Formaldehyde, and Melamine-Formaldehyde ResinsCELZARD, A; PIZZI, A; FIERRO, V et al.Journal of polymer science. Part B. Polymer physics. 2008, Vol 46, Num 10, pp 971-978, issn 0887-6266, 8 p.Article

Structure degradation, conservation and rearrangement in the carbonisation of polyflavonoid tannin/furanic rigid foams : A MALDI-TOF investigationTONDI, G; PIZZI, A; PASCH, H et al.Polymer degradation and stability. 2008, Vol 93, Num 5, pp 968-975, issn 0141-3910, 8 p.Article

Methodical study of the chemical activation of Kraft lignin with KOH and NaOHFIERRO, V; TORNE-FERNANDEZ, V; CELZARD, A et al.Microporous and mesoporous materials. 2007, Vol 101, Num 3, pp 419-431, issn 1387-1811, 13 p.Article

Surface area of compressed expanded graphiteCELZARD, A; MARECHE, J. F; FURDIN, G et al.Carbon (New York, NY). 2002, Vol 40, Num 14, pp 2713-2718, issn 0008-6223, 6 p.Article

Biomass-derived, thermally conducting, carbon foams for seasonal thermal storageJANA, P; FIERRO, V; PIZZI, A et al.Biomass & bioenergy. 2014, Vol 67, pp 312-318, issn 0961-9534, 7 p.Article

Emulsion-templated porous carbon monoliths derived from tanninsSZCZUREK, A; FIERRO, V; PIZZI, A et al.Carbon (New York, NY). 2014, Vol 74, pp 352-362, issn 0008-6223, 11 p.Article

Oligomer Distribution at the Gel Point of Tannin-resorcinol-formaldehyde Cold-Set Wood AdhesivesPIZZI, A; PASCH, H; CELZARD, A et al.Journal of adhesion science and technology. 2011, Vol 26, Num 1-3, pp 79-88, issn 0169-4243, 10 p.Article

Kraft lignin as a precursor for microporous activated carbons prepared by impregnation with ortho-phosphoric acid : Synthesis and textural characterisationFIERRO, V; TORNE-FERNANDEZ, V; CELZARD, A et al.Microporous and mesoporous materials. 2006, Vol 92, Num 1-3, pp 243-250, issn 1387-1811, 8 p.Article

Highly microporous carbons prepared by activation of kraft lignin with KOHFIERRO, V; TORNE-FERNANDEZ, V; CELZARD, A et al.Studies in surface science and catalysis. 2006, pp 607-614, issn 0167-2991, isbn 0-444-52022-8, 8 p.Conference Paper

Influence of Nanoclay on Urea-Formaldehyde Resins for Wood Adhesives and Its ModelHONG LEI; GUANBEN DU; PIZZI, Antonio et al.Journal of applied polymer science (Print). 2008, Vol 109, Num 4, pp 2442-2451, issn 0021-8995, 10 p.Article

Modelling of exfoliated graphiteCELZARD, A; MARECHE, J. F; FURDIN, G et al.Progress in materials science. 2005, Vol 50, Num 1, pp 93-179, issn 0079-6425, 87 p.Article

Describing the properties of compressed expanded graphite through power lawsCELZARD, A; MARECHE, J. F; FURDIN, G et al.Journal of physics. Condensed matter (Print). 2003, Vol 15, Num 43, pp 7213-7226, issn 0953-8984, 14 p.Article

Développement et caractérisation de mousses à base de tanins de Quebracho = Development and characterization of Quebracho tannins based foamsLAGEL, M. C; MARTINEZ DE YUSO, A; PIZZI, A et al.Matériaux et techniques. 2014, Vol 102, Num 1, issn 0032-6895, 104.1-104.5Article

Carbon meringues derived from flavonoid tanninsSZCZUREK, A; FIERRO, V; PIZZI, A et al.Carbon (New York, NY). 2013, Vol 65, pp 214-227, issn 0008-6223, 14 p.Article