Influence of amorphous silica on the hydration in ultra-high performance concreteOERTEL, Tina; HELBIG, Uta; HUTTER, Frank et al.Cement and concrete research. 2014, Vol 58, pp 121-130, issn 0008-8846, 10 p.Article

Robust SCC Mixes through Mix DesignNUNES, Sandra; MILHEIRO-OLIVEIRA, Paula; SOUSA COUTINHO, Joana et al.Journal of materials in civil engineering. 2013, Vol 25, Num 2, pp 183-193, issn 0899-1561, 11 p.Article

Influences of Polymer Modification and Exposure Conditions on Chloride Permeability of Cement Mortars and CompositesRAMLI, Mahyuddin; AKHAVAN TABASSI, Amin.Journal of materials in civil engineering. 2012, Vol 24, Num 2, pp 216-222, issn 0899-1561, 7 p.Article

The effect of aluminium oxide nanoparticles on the compressive strength and structure of self-compacting concreteNAZARI, Ali; RIAHI, Shadi.Magazine of concrete research. 2012, Vol 64, Num 1, pp 71-82, issn 0024-9831, 12 p.Article

Flowing ability of self-consolidating concrete and its binder paste phase including palm oil fuel ashSAFIUDDIN; SALAM, Abdus; ZAMIN JUMAAT, Mohd et al.Magazine of concrete research. 2012, Vol 64, Num 10, pp 931-944, issn 0024-9831, 14 p.Article

Optimization of steam-curing regime for high-strength, self-consolidating concrete for precast, prestressed concrete applicationsHWANG, Soo-Duck; KHATIB, Rami; HOI KEUN LEE et al.PCI journal. 2012, Vol 57, Num 3, pp 48-62, issn 0887-9672, 15 p.Article

UK contractors' views on self-compacting concrete in constructionRICH, David; GLASS, Jacqui; GIBB, Alistair G. F et al.Proceedings of the Institution of Civil Engineers. Construction materials (Print). 2012, Vol 165, Num 4, pp 201-210, issn 1747-650X, 10 p.Article

Revisiting the protected paste volume concept for internal curing of high-strength concretesZHUTOVSKY, Semion; KOVLER, Konstantin; BENTUR, Arnon et al.Cement and concrete research. 2011, Vol 41, Num 9, pp 981-986, issn 0008-8846, 6 p.Article

Specifications and testing of self-consolidating mortar designated for annular space groutingHWANG, Soo-Duck; KHAYAT, Kamal H; MORIN, Richard et al.Canadian journal of civil engineering (Print). 2011, Vol 38, Num 4, pp 422-432, issn 0315-1468, 11 p.Article

The role of SiO₂ nanoparticles and ground granulated blast furnace slag admixtures on physical, thermal and mechanical properties of self compacting concreteNAZARI, Ali; RIAHI, Shadi.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2011, Vol 528, Num 4-5, pp 2149-2157, issn 0921-5093, 9 p.Article

Autogenous shrinkage of concrete with design strength 60―120 N/_mm²YOO, Doo-Yeol; MIN, Kyung-Hwan; LEE, Joo-Ha et al.Magazine of concrete research. 2011, Vol 63, Num 10, pp 751-761, issn 0024-9831, 11 p.Article

Effect of Temperature on Thermal Properties of Different Types of High-Strength ConcreteKODUR, Venkatesh; KHALIQ, Wisim.Journal of materials in civil engineering. 2011, Vol 23, Num 6, pp 793-801, issn 0899-1561, 9 p.Article

Experimental Study of High-Strength Concrete Columns Confined with Different Types of Mesh under Eccentric and Concentric LoadsHADI, Muhammad N. S; HUA ZHAO.Journal of materials in civil engineering. 2011, Vol 23, Num 6, pp 823-832, issn 0899-1561, 10 p.Article

Production of HSC using pumicite and water-reducing admixtureEETHAR THANON DAWOOD; RAMLI, Mahyuddin; ISMAEEL, Nadia S et al.Proceedings of the Institution of Civil Engineers. Construction materials (Print). 2011, Vol 164, Num 3, pp 131-142, issn 1747-650X, 12 p.Article

Mixing of high performance concrete: effect of concrete composition and mixing intensity on mixing timeMAZANEC, O; LOWKE, D; SCHIESSL, P et al.Materials and structures. 2010, Vol 43, Num 3, pp 357-365, issn 1359-5997, 9 p.Article

Flowing ability of self-consolidating concrete and its binder paste and mortar components incorporating rice husk ashSAFIUDDIN, Md; WEST, J. S; SOUDKI, K. A et al.Canadian journal of civil engineering (Print). 2010, Vol 37, Num 3, pp 401-412, issn 0315-1468, 12 p.Article

Strength properties of HPC using binary, ternary and quaternary cementitious blendsCHINNARAJU, K; SUBRAMANIAN, K; SENTHIL KUMAR, S. R. R et al.Structural concrete (London. 1999). 2010, Vol 11, Num 4, pp 191-198, issn 1464-4177, 8 p.Article

Effect of compaction on mechanical and thermal properties of hemp concreteTAI THU NGUYEN; PICANDET, Vincent; CARRE, Patrick et al.European journal of environmental and civil engineering. 2010, Vol 14, Num 5, pp 545-560, issn 1964-8189, 16 p.Conference Paper

Optimum superplasticiser dosage and aggregate proportions for SCCKWAN, A. K. H; NG, I. Y. T.Magazine of concrete research. 2009, Vol 61, Num 4, pp 281-292, issn 0024-9831, 12 p.Article

Development of Self-Consolidating Concrete for Thin Wall Applications Including ValidationWHITCOMB, Brent L; KIOUSIS, Panos D.Journal of materials in civil engineering. 2009, Vol 21, Num 10, pp 587-593, issn 0899-1561, 7 p.Article

Effects of fibre type and matrix structure on the mechanical performance of self-compacting micro-concrete compositesFELEKOGLU, Burak; TOSUN, Kamile; BARADAN, Bülent et al.Cement and concrete research. 2009, Vol 39, Num 11, pp 1023-1032, issn 0008-8846, 10 p.Article

Evaluating and forecasting the initial and final setting times of self-compacting concretes containing mineral admixtures by neural networkGÜNEYISI, Erhan; GESOGLU, Mehmet; ÖZBAY, Erdogan et al.Materials and structures. 2009, Vol 42, Num 4, pp 469-484, issn 1359-5997, 16 p.Article

Ultra-high performance concrete in Germany and the world : Current state of research, technical rules and standards and practical application = Ultrahochfester Beton in Deutschland und der Welt : Stand der Forschung, technische Regelwerke und praktische AnwendungSCHMIDT, Michael.Betonwerk und Fertigteil-Technik. 2009, Vol 75, Num 2, pp 14-16, issn 0373-4331, 3 p.Conference Paper

Measurement systems for determining formwork pressure of highly-flowable concreteKHAYAT, Kamal H; ASSAAD, Joseph J.Materials and structures. 2008, Vol 41, Num 1, pp 37-46, issn 1359-5997, 10 p.Article

Available plastic rotation in continuous high-strength concrete beamsDO CARMO, Ricardo N. F; LOPES, Sérgio M. R.Canadian journal of civil engineering (Print). 2008, Vol 35, Num 10, pp 1152-1162, issn 0315-1468, 11 p.Article