Bounds on effective magnetic permeability of three-phase composites with coated spherical inclusionsLINZHI WU; SHIDONG PAN.Composites science and technology. 2012, Vol 72, Num 12, pp 1443-1450, issn 0266-3538, 8 p.Article

Mechanical and metallurgical properties of friction-welded TiC particulate reinforced Ti-6Al-4VDA SILVA, Antonio A. M; MEYER, Axel; DOS SANTOS, Jorge F et al.Composites science and technology. 2004, Vol 64, Num 10-11, pp 1495-1501, issn 0266-3538, 7 p.Article

A new principle in design of composite materials: reinforcement by interlocked elementsDYSKIN, A. V; ESTRIN, Y; KANEL-BELOV, A. J et al.Composites science and technology. 2003, Vol 63, Num 3-4, pp 483-491, issn 0266-3538, 9 p.Conference Paper

Coordinate-free derivation and weak formulation of a general imperfect interface model for thermal conduction in compositesGU, S. T; MONTEIRO, Eric; HE, Q. C et al.Composites science and technology. 2011, Vol 71, Num 9, pp 1209-1216, issn 0266-3538, 8 p.Article

Multi-level modeling of effective elastic behavior and progressive weakened interface in particulate compositesLEE, H. K; PYO, S. H.Composites science and technology. 2008, Vol 68, Num 2, pp 387-397, issn 0266-3538, 11 p.Article

Microstructural evolution of reactive-sintered aluminum matrix compositesCHEN, Zhong-Chun; TAKEDA, Takenobu; IKEDA, Keisuke et al.Composites science and technology. 2008, Vol 68, Num 10-11, pp 2245-2253, issn 0266-3538, 9 p.Article

Mechanical properties of a Mg-10 (vol.%)Ti compositePEREZ, P; GARCES, G; ADEVA, P et al.Composites science and technology. 2004, Vol 64, Num 1, pp 145-151, issn 0266-3538, 7 p.Article

An effective computer generation method for the composites with random distribution of large numbers of heterogeneous grainsYAN YU; JUNZHI CUI; FEI HAN et al.Composites science and technology. 2008, Vol 68, Num 12, pp 2543-2550, issn 0266-3538, 8 p.Article

Preparation and characterization of mesophase-pitch-based foam/natural graphite compositesWANG, Mei-Xian; WANG, Cheng-Yang; LI, Tong-Qi et al.Composites science and technology. 2008, Vol 68, Num 10-11, pp 2220-2223, issn 0266-3538, 4 p.Article

Method of quantitative analysis of filler dispersion in composite systems with spherical inclusionsGLASKOVA, T; ZARRELLI, M; BORISOVA, A et al.Composites science and technology. 2011, Vol 71, Num 13, pp 1543-1549, issn 0266-3538, 7 p.Article

A two-way particle mapping for calculation of the effective dielectric response of graded spherical compositesLOMBARDO, N.Composites science and technology. 2007, Vol 67, Num 3-4, pp 728-736, issn 0266-3538, 9 p.Article

Mean-field homogenization of multi-phase thermo-elastic composites: a general framework and its validationPIERARD, O; FRIEBEL, C; DOGHRI, I et al.Composites science and technology. 2004, Vol 64, Num 10-11, pp 1587-1603, issn 0266-3538, 17 p.Article

On the role of matrix grain size and particulate reinforcement on the hardness of powder metallurgy Al―Mg―Si/MoSi₂ compositesCORROCHANO, J; LIEBLICH, M; IBANEZ, J et al.Composites science and technology. 2009, Vol 69, Num 11-12, pp 1818-1824, issn 0266-3538, 7 p.Article

Damage accumulation and mechanical properties of particle-reinforced metal-matrix composites during hydrostatic extrusionLAHAIE, D. J; EMBURY, J. D; ZOK, F. W et al.Composites science and technology. 2004, Vol 64, Num 10-11, pp 1539-1549, issn 0266-3538, 11 p.Article

Thermal cycling characteristics of in-situ Al-based composites prepared by reactive hot pressingTJONG, S. C; TAM, K. F; WU, S. Q et al.Composites science and technology. 2003, Vol 63, Num 1, pp 89-97, issn 0266-3538, 9 p.Article

Chemical functionalization of graphene oxide toward the tailoring of the interface in polymer compositesBIN SHEN; WENTAO ZHAI; MIMI TAO et al.Composites science and technology. 2013, Vol 77, pp 87-94, issn 0266-3538, 8 p.Article

Conditions of applying Oliver-Pharr method to the nanoindentation of particles in compositesWENYI YAN; LUN PUN, Chung; SIMON, George P et al.Composites science and technology. 2012, Vol 72, Num 10, pp 1147-1152, issn 0266-3538, 6 p.Article

Fatigue crack growth behavior of silica particulate reinforced epoxy resin compositeBOONYAPOOKANA, Alisa; NAGATA, Kohsoku; MUTOH, Yoshiharu et al.Composites science and technology. 2011, Vol 71, Num 8, pp 1124-1131, issn 0266-3538, 8 p.Article

Free vibration, buckling, and static deflections of functionally graded platesABRATE, Serge.Composites science and technology. 2006, Vol 66, Num 14, pp 2383-2394, issn 0266-3538, 12 p.Article

Damping characterization of magnesium based composites using an innovative circle-fit approachSRIKANTH, Narasimalu; GUPTA, Manoj.Composites science and technology. 2003, Vol 63, Num 3-4, pp 559-568, issn 0266-3538, 10 p.Conference Paper

Nano and microcomposites of polymers elastomers and their reinforcementDONNET, J. B.Composites science and technology. 2003, Vol 63, Num 8, pp 1085-1088, issn 0266-3538, 4 p.Conference Paper

The mechanics of graphene nanocomposites: A reviewYOUNG, Robert J; KINLOCH, Ian A; LEI GONG et al.Composites science and technology. 2012, Vol 72, Num 12, pp 1459-1476, issn 0266-3538, 18 p.Article

Effect of friction stir welding on microstructure, tensile and fatigue properties of the AA7005/10 vol.%Al₂O_3p compositeCESCHINI, L; BOROMEI, I; MINAK, G et al.Composites science and technology. 2007, Vol 67, Num 3-4, pp 605-615, issn 0266-3538, 11 p.Article

On the effect of particle size on fracture toughness of polymer compositesLAUKE, Bernd.Composites science and technology. 2008, Vol 68, Num 15-16, pp 3365-3372, issn 0266-3538, 8 p.Article

A micromechanical analysis of a local failure criterion for particle-reinforced compositesGUILLEMINOT, Johann; KONDO, Djimedo; BINETRUY, Christophe et al.Composites science and technology. 2007, Vol 67, Num 11-12, pp 2384-2389, issn 0266-3538, 6 p.Article