Plastic Localization Phenomena in a Mn-Alloyed Austenitic SteelSCAVINO, G; D'AIUTO, F; MATTEIS, P et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2010, Vol 41, Num 6, pp 1493-1501, issn 1073-5623, 9 p.Article

Use of double loop electrochemical potentiokinetic reactivation (DL-EPR) to evaluate the sensitization of austenitic steels after weldingLUZ, T; FARIAS, J. P; NETO, P et al.Welding international. 2006, Vol 20, Num 12, pp 959-964, issn 0950-7116, 6 p.Article

Lattice parameters of iron-carbon and iron-nitrogen martensites and austenitesLIU CHANG; BÖTTGER, A; DE KEIJSER, T. H et al.Scripta metallurgica. 1990, Vol 24, Num 3, pp 509-514, issn 0036-9748Article

Corrosion Mechanism of Alloy 310 Austenitic Steel beneath NaCl Deposit under Varying SO₂ Concentrations in an Oxy-fuel Combustion Atmosphere : IMPACTS OF FUEL QUALITY ON POWER PRODUCTION AND THE ENVIRONMENTPANERU, Manoj; STEIN-BRZOZOWSKA, Gosia; MAIER, Jörg et al.Energy & fuels. 2013, Vol 27, Num SEPOCT, pp 5699-5705, issn 0887-0624, 7 p.Article

Microstructure and Mechanical Behaviors of 0.1C-13Mn Metastable Austenitic SteelSUH, Dong-Woo; PARK, Seong-Jun; LEE, Chang-Hoon et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2009, Vol 40, Num 2, pp 264-268, issn 1073-5623, 5 p.Article

Werkzeugbelastung beim Reiben schwer zerspanbarer Stähle = Tool loading in friction with steel difficult to machineWEINERT, Klaus; HAGEDORN, Michael.VDI-Z. 2002, Vol 144, Num 4, pp 51-54, issn 0042-1766Article

Reinforcement of Austenitic Manganese Steel with (TiMo) Carbide Particles Previously Synthesized by SHSERAUSKIN, Jose Ignacio; SARGYAN, Ara; ARANA, Jose Luis et al.ISIJ international. 2009, Vol 49, Num 4, pp 582-586, issn 0915-1559, 5 p.Article

Korrosion nichtrostender austenitischer Stähle in (kondensierender) chloridhaltiger SalpetersäureHORN, E.-M; SCHOELLER, K.Werkstoffe und Korrosion. 1991, Vol 42, Num 11, pp 559-569, issn 0043-2822Article

Portevin―Le Chatelier Effects in a High-Mn Austenitic SteelSCAVINO, Giorgio; DI SALVO, Carolina; MATTEIS, Paolo et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2013, Vol 44, Num 2, pp 787-792, issn 1073-5623, 6 p.Article

Crack tip fields under non-steady creep conditions. II: Estimates of associated crack growthAINSWORTH, R. A; BUDDEN, P. J.Fatigue & fracture of engineering materials & structures (Print). 1990, Vol 13, Num 3, pp 277-285, issn 8756-758X, 9 p.Article

Corrosion behavior of a 14Cr-ODS steel in supercritical waterHU, H. L; ZHOU, Z. J; LIAO, L et al.Journal of nuclear materials. 2013, Vol 437, Num 1-3, pp 196-200, issn 0022-3115, 5 p.Article

Hot Deformation Behavior and Microstructural Evolution of a Nickel-Free Austenitic Steel with High Nitrogen ContentERISIR, Ersoy; PRAHL, Ulrich; BLECK, Wolfgang et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2013, Vol 44, Num 12, pp 5549-5555, issn 1073-5623, 7 p.Article

Premature Fracture Mechanism in an Fe-Mn-C Austenitic SteelKOYAMA, Motomichi; SAWAGUCHI, Takahiro; TSUZAKI, Kaneaki et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2012, Vol 43, Num 11, pp 4063-4074, issn 1073-5623, 12 p.Article

Kinetics of the γ → ε Martensitic Transformation in Fine-Grained Fe-26Mn-0.14C Austenitic SteelHAMADA, A. S; SAHU, P; GHOSH CHOWDHURY, S et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2008, Vol 39, Num 2, pp 462-465, issn 1073-5623, 4 p.Article

Stressed-strained state of cryogenic vessels under cyclic loading by external pressureLIKHMAN, V. V; KOPYSITSKAYA, L. N; MURATOV, V. M et al.Chemical and petroleum engineering. 1997, Vol 33, Num 6, pp 629-632, issn 0009-2355Article

Einfluss der Ermüdung auf die Austenitisierung niedriglegierter VergütungsstähleROTHER, E; WOLTER, F.HTM. Härterei-technische Mitteilungen. 1991, Vol 46, Num 4, pp 213-215, issn 0341-101XArticle

High sensitivity detection and classification of defects in austenitic weldments using cluster analysis and pattern recognitionKALYANASUNDARAM, P; RAJAGOPALAN, C; BALDEV RAJ et al.British Journal of Non-Destructive Testing. 1991, Vol 33, Num 6, pp 290-297, issn 0007-1137Article

Beobachtung einer Sättigung von Schwellen und bestrahlungsinduziertem Kriechen in einem austenitischen 15Cr-35Ni Stahl bei NeutronenbestrahlungHERSCHBACH, K; BERGMANN, H.-J.Journal of nuclear materials. 1990, Vol 175, Num 1-2, pp 143-146, issn 0022-3115Article

Développements récents au Japon d'aciers austénitiques au Mn destinés aux applications cryogéniques = Recent developments, in Japan, in the field of austenitic manganese steel for cryogenic applicationsFUJIKURA, M.Matériaux et techniques. 1986, Vol 74, Num 9-10, pp 425-431, issn 0032-6895Article

The strength of austenite-ferrite dissimilar metal welds in chemical plant at temperatures below 400°CPOHLE, C.Welding international. 1991, Vol 5, Num 5, pp 409-413, issn 0950-7116Article

Bohren und Gewindebohren in rostfreie Stähle = Drilling and tapping in stainless steelsMÜLLER, Peter; HEILE, Roland.VDI-Z. 2003, Vol 145, Num 5, pp 42-43, issn 0042-1766, 2 p.Article

Characterization of Nonmetallic Inclusions in High-Manganese and Aluminum-Alloyed Austenitic SteelsJOO HYUN PARK; KIM, Dong-Jin; DONG JOON MIN et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2012, Vol 43, Num 7, pp 2316-2324, issn 1073-5623, 9 p.Article

A study on the redistribution of ion-implanted nitrogen in Ti-modified austenitic steelARUNKUMAR, J; DAVID, C; VARGHESE ANTO, C et al.Journal of nuclear materials. 2011, Vol 414, Num 3, pp 382-385, issn 0022-3115, 4 p.Article

Effect of ultrasonic vibration on unmixed zone formationCUI, Y; XU, C. L; HAN, Q et al.Scripta materialia. 2006, Vol 55, Num 11, pp 975-978, issn 1359-6462, 4 p.Article

High-power diode-laser welding of austenitic steelsKLIMPEL, A; LISIECKI, A; FIGIEL, T et al.Welding international. 2003, Vol 17, Num 3, pp 189-195, issn 0950-7116, 7 p.Article