Characterization of the dynamic failure behaviour of a glass-fiber/vinyl-ester at different temperatures by means of instrumented Charpy impact testingKALTHOFF, J. F.Composites. Part B, Engineering. 2004, Vol 35, Num 6-8, pp 657-663, issn 1359-8368, 7 p.Article

Energy absorption in composite laminates under impact loadingQUARESIMIN, Marino; RICOTTA, Mauro; MARTELLO, Livio et al.Composites. Part B, Engineering. 2013, Vol 44, Num 1, pp 133-140, issn 1359-8368, 8 p.Article

Elastoplastic contact/impact of rigidly supported compositesMAJEED, Majed A; YIGIT, Ahmet S; CHRISTOFOROU, Andreas P et al.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 1244-1251, issn 1359-8368, 8 p.Article

Fractographic observations on Dyneema^® composites under ballistic impactGREENHALGH, E. S; BLOODWORTH, V. M; IANNUCCI, L et al.Composites. Part A, Applied science and manufacturing. 2013, Vol 44, pp 51-62, issn 1359-835X, 12 p.Article

Thermodynamically consistent coupled viscoplastic damage model for perforation and penetration in metal matrix composite materialsVOYIADJIS, George Z; DELIKTAS, Babur; PALAZOTTO, Anthony N et al.Composites. Part B, Engineering. 2009, Vol 40, Num 6, pp 427-433, issn 1359-8368, 7 p.Article

The influence of strain measurement on the impact performance of sports mouthguardsFOUND, M. S; PATRICK, D. G; PEARSON, J. R et al.Composites. Part A, Applied science and manufacturing. 2006, Vol 37, Num 11, pp 2164-2170, issn 1359-835X, 7 p.Article

Perforation of FRP laminates under impact by flat-nosed projectilesWU, Q. G; WEN, H. M; QIN, Y et al.Composites. Part B, Engineering. 2012, Vol 43, Num 2, pp 221-227, issn 1359-8368, 7 p.Article

Simulation of perforation and penetration in metal matrix composite materials using coupled viscoplastic damage modelOELIKTAS, Babur; VOYIADJIS, George Z; PALAZOTTO, Anthony N et al.Composites. Part B, Engineering. 2009, Vol 40, Num 6, pp 434-442, issn 1359-8368, 9 p.Article

Effect of laminate thickness and of matrix resin on the impact of low fibre-volume, woven roving E-glass compositesSUTHERLAND, L. S; GUEDES SOARES, C.Composites science and technology. 2004, Vol 64, Num 10-11, pp 1691-1700, issn 0266-3538, 10 p.Article

Damage assessment of impacted thin CFRP panelsFOUND, M. S; LAMB, J. R.Composites. Part A, Applied science and manufacturing. 2004, Vol 35, Num 9, pp 1039-1047, issn 1359-835X, 9 p.Conference Paper

Numerical simulation of hypervelocity impacts of a projectile on laminated composite plate targets by means of improved SPH methodSHINTATE, K; SEKINE, H.Composites. Part A, Applied science and manufacturing. 2004, Vol 35, Num 6, pp 683-692, issn 1359-835X, 10 p.Article

Study of fiber hoop-wrapped composite cylinders impact resistanceZHANG YONGMING; LI PEINING; WANG XI et al.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 1377-1383, issn 1359-8368, 7 p.Article

Post-impact static and cyclic flexural characterisation of hemp fibre reinforced laminatesDE ROSA, Igor Maria; NATH DHAKAL, Hom; SANTULLI, Carlo et al.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 1382-1396, issn 1359-8368, 15 p.Article

Evaluation of impact assessment methodologies. Part I: Applied methodsKÄRGER, L; BAARAN, J; GUNNION, A et al.Composites. Part B, Engineering. 2009, Vol 40, Num 1, pp 65-70, issn 1359-8368, 6 p.Article

Experimental analysis of damage creation and permanent indentation on highly oriented platesABI ABDALLAH, Elias; BOUVET, Christophe; RIVALLANT, Samuel et al.Composites science and technology. 2009, Vol 69, Num 7-8, pp 1238-1245, issn 0266-3538, 8 p.Article

The influence of heat treatment on the impact performance of sports mouthguard materialsPATRICK, D. G; VAN NOORT, R; FOUND, M. S et al.Composites. Part A, Applied science and manufacturing. 2006, Vol 37, Num 9, pp 1423-1427, issn 1359-835X, 5 p.Article

Impact velocity effect on the delamination of woven carbon-epoxy plates subjected to low-velocity equienergetic impact loadsZABALA, H; ARETXABALETA, L; CASTILLO, G et al.Composites science and technology. 2014, Vol 94, pp 48-53, issn 0266-3538, 6 p.Article

Modelling the simulation of impact induced damage onset and evolution in compositesRICCIO, A; DE LUCA, A; DI FELICE, G et al.Composites. Part B, Engineering. 2014, Vol 66, pp 340-347, issn 1359-8368, 8 p.Article

Viscoelastically prestressed polymeric matrix composites ― Effects of test span and fibre volume fraction on Charpy impact characteristicsFAZAL, Adnan; FANCEY, Kevin S.Composites. Part B, Engineering. 2013, Vol 44, Num 1, pp 472-479, issn 1359-8368, 8 p.Article

Normal and oblique penetration of woven CFRP laminates by a high velocity steel sphereHAZELL, P. J; KISTER, G; STENNETT, C et al.Composites. Part A, Applied science and manufacturing. 2008, Vol 39, Num 5, pp 866-874, issn 1359-835X, 9 p.Article

The effect of water immersion ageing on low-velocity impact behaviour of woven aramid-glass fibre/epoxy compositesIMIELINSKA, Krystyna; GUILLAUMAT, Laurent.Composites science and technology. 2004, Vol 64, Num 13-14, pp 2271-2278, issn 0266-3538, 8 p.Article

A procedure for stiffness correction of a panel made from composite materialKORMI, K; WIJAYATHUNGA, V. N; WEBB, D. C et al.Composites science and technology. 2003, Vol 63, Num 12, pp 1789-1794, issn 0266-3538, 6 p.Article

An analytical model for composite sandwich panels with honeycomb core subjected to high-velocity impactFELI, S; NAMDARI POUR, M. H.Composites. Part B, Engineering. 2012, Vol 43, Num 5, pp 2439-2447, issn 1359-8368, 9 p.Article

Monitoring of multiaxial fatigue damage evolution in impacted composite tubes using non-destructive evaluationSCHMIDT, F; RHEINFURTH, M; PROTZ, R et al.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 3, pp 537-546, issn 1359-835X, 10 p.Article

On the rate of growth and extent of the steady damage accumulation phase in repeated impact testsBELINGARDI, Giovanni; PIA CAVATORTA, Maria; SALVATORE PAOLINO, Davide et al.Composites science and technology. 2009, Vol 69, Num 11-12, pp 1693-1698, issn 0266-3538, 6 p.Conference Paper