Sandwich buckling formulas and applicability of standard computational algorithm for finite strainBAZANT, Zdenek P; BEGHINI, Alessandro.Composites. Part B, Engineering. 2004, Vol 35, Num 6-8, pp 573-581, issn 1359-8368, 9 p.Article

Fluid―structure interaction of FRP wind turbine blades under aerodynamic effectLEE, Ya-Jung; JHAN, Yu-Ti; CHUNG, Cheng-Hsien et al.Composites. Part B, Engineering. 2012, Vol 43, Num 5, pp 2180-2191, issn 1359-8368, 12 p.Article

Optimum design of FRP rib core bridge deckTUSHAR KANTI DEY; SRIVASTAVA, Ishan; RAVI PRAKASH KHANDELWAL et al.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 930-938, issn 1359-8368, 9 p.Article

RC square sections confined by FRP: Analytical prediction of peak strengthNISTICO, Nicola; MONTI, Giorgio.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 127-137, issn 1359-8368, 11 p.Article

The simulation of bone healing process of fractured tibia applied with composite bone plates according to the diaphyseal oblique angle and plate modulusSON, Dae-Sung; CHANG, Seung-Hwan.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 1325-1335, issn 1359-8368, 11 p.Article

Design and analysis of a tri-stable structure based on bi-stable laminatesFUHONG DAI; HAO LI; SHANYI DU et al.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 9, pp 1497-1504, issn 1359-835X, 8 p.Article

Constrained torsional analysis of multi-cell composite tapered beamsAHMED, M. N; ZAHID, M.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 1341-1345, issn 1359-8368, 5 p.Article

Study on the strength prediction model of Comeld composites jointsHONGJIAN ZHANG; WEIDONG WEN; HAITAO CUI et al.Composites. Part B, Engineering. 2012, Vol 43, Num 8, pp 3310-3317, issn 1359-8368, 8 p.Article

Multi-line enhanced beam model for the analysis of laminated composite structuresCARRERA, Erasmo; PAGANI, Alfonso.Composites. Part B, Engineering. 2014, Vol 57, pp 112-119, issn 1359-8368, 8 p.Article

Dynamic response of functionally graded plates in thermal environment under moving loadMALEKZADEH, P; MONAJJEMZADEH, S. M.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 1521-1533, issn 1359-8368, 13 p.Article

Dynamic response of functionally graded plates under moving heat sourceMALEKZADEH, P; SHOJAEE, S. A.Composites. Part B, Engineering. 2013, Vol 44, Num 1, pp 295-303, issn 1359-8368, 9 p.Article

Dynamic buckling of a laminated composite stringer-stiffened cylindrical panelLESS, H; ABRAMOVICH, H.Composites. Part B, Engineering. 2012, Vol 43, Num 5, pp 2348-2358, issn 1359-8368, 11 p.Article

Finite element model for NCF composite reinforcement preforming: Importance of inter-ply slidingBEL, S; HAMILA, N; BOISSE, P et al.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 12, pp 2269-2277, issn 1359-835X, 9 p.Article

Investigation of thermally induced bistable behaviour for tow-steered laminatesPANESAR, Ajit S; HAZRA, Kalyan; WEAVER, Paul M et al.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 6, pp 926-934, issn 1359-835X, 9 p.Article

C⁰ triangular elements based on the Refined Zigzag Theory for multilayer composite and sandwich platesVERSINO, Daniele; GHERLONE, Marco; MATTONE, Massimiliano et al.Composites. Part B, Engineering. 2013, Vol 44, Num 1, pp 218-230, issn 1359-8368, 13 p.Article

Experimental investigation of the mechanical connection between FRP laminates and concreteREALFONZO, Roberto; MARTINELLI, Enzo; NAPOLI, Annalisa et al.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 341-355, issn 1359-8368, 15 p.Article

Multi-objective optimization of curvilinear fiber shapes for laminated composite plates by using NSGA-IIHONDA, Shinya; IGARASHI, Teruki; NARITA, Yoshihiro et al.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 1071-1078, issn 1359-8368, 8 p.Article

On the determination of the shear modulus of carbon nanotubesGHAVAMIAN, Ali; RAHMANDOUST, Moones; ÖCHSNER, Andreas et al.Composites. Part B, Engineering. 2013, Vol 44, Num 1, pp 52-59, issn 1359-8368, 8 p.Article

Environmental effects on mode II fatigue delamination growth in an aerospace grade carbon/epoxy compositeLANDRY, Benoit; LAPLANTE, Gabriel; LEBLANC, Luc R et al.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 3, pp 475-485, issn 1359-835X, 11 p.Article

Investigations on the mechanical behavior of a wind rotor blade subcomponentZAROUCHAS, D. S; MAKRIS, A. A; SAYER, F et al.Composites. Part B, Engineering. 2012, Vol 43, Num 2, pp 647-654, issn 1359-8368, 8 p.Article

Mechanical property evaluation of single-walled carbon nanotubes by finite element modelingXIAOXING LU; ZHONG HU.Composites. Part B, Engineering. 2012, Vol 43, Num 4, pp 1902-1913, issn 1359-8368, 12 p.Article

Non-linear buckling analysis of tapered curved composite plates based on a simplified methodologyAKHLAQUE-E-RASUL, Shaikh; GANESAN, Rajamohan.Composites. Part B, Engineering. 2012, Vol 43, Num 2, pp 797-804, issn 1359-8368, 8 p.Article

Parametric effects on embedded delamination buckling in composite structures using the EAS three-dimensional elementPARK, Dae-Yong; LEE, Sang-Youl.Composites. Part B, Engineering. 2012, Vol 43, Num 4, pp 1800-1812, issn 1359-8368, 13 p.Article

The simulation of tissue differentiation at a fracture gap using a mechano-regulation theory dealing with deviatoric strains in the presence of a composite bone plateKIM, Hyun-Jun; CHANG, Seung-Hwan; JUNG, Ho-Joong et al.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 978-987, issn 1359-8368, 10 p.Article

A comparison between the Iosipescu and off-axis shear test methods for the characterization of Pinus Pinaster AitXAVIER, J. C; GARRIDO, N. M; OLIVEIRA, M et al.Composites. Part A, Applied science and manufacturing. 2004, Vol 35, Num 7-8, pp 827-840, issn 1359-835X, 14 p.Conference Paper