A new approach for studying mechanical properties of thin surface layers affected by manufacturing processesMOYLAN, S. P; KOMPELLA, S; CHANDRASEKAR, S et al.Journal of manufacturing science and engineering. 2003, Vol 125, Num 2, pp 310-315, issn 1087-1357, 6 p.Article

INVESTIGATING THE EFFECTS OF EDM PARAMETERS ON SURFACE INTEGRITY, MRR AND TWR IN MACHINING OF Ti―6Al―4VJABBARIPOUR, B; SADEGHI, M. H; FARIDVAND, Sh et al.Machining science and technology. 2012, Vol 16, Num 3, pp 419-444, issn 1091-0344, 26 p.Article

INVESTIGATION INTO THE CHARACTERISTICS OF WHITE LAYERS PRODUCED IN A NICKEL-BASED SUPERALLOY FROM DRILLING OPERATIONSHERBERT, Christopher; AXINTE, Dragos; HARDY, Mark et al.Machining science and technology. 2012, Vol 16, Num 1, pp 40-52, issn 1091-0344, 13 p.Article

Influence of a white layer on the performance of hard machined surfaces in rolling contactCHOI, Y.Proceedings of the Institution of Mechanical Engineers. Part B. Journal of engineering manufacture. 2010, Vol 224, Num 8, pp 1207-1215, issn 0954-4054, 9 p.Article

Recent advances in white organic light emitting diodes with a single emissive dopantTSUBOI, Taiju.Journal of non-crystalline solids. 2010, Vol 356, Num 37-40, pp 1919-1927, issn 0022-3093, 9 p.Conference Paper

Nitridation of high speed steel by electron cyclotron resonance plasmaABDUL MAJEED, Riyadh M. A; PUROHIT, Vishwas; BHIDE, Rajesh et al.Journal of physics. D, Applied physics (Print). 2006, Vol 39, Num 10, pp 2109-2113, issn 0022-3727, 5 p.Article

Microscale mechanical behavior of the subsurface by finishing processesGUO, Y. B; WARREN, A. W.Journal of manufacturing science and engineering. 2005, Vol 127, Num 2, pp 333-338, issn 1087-1357, 6 p.Article

Changes in microstructure, texture and residual stresses on the surface of a rail resulting from friction and wearPYZALLA, A; WANG, L; WILD, E et al.Wear. 2001, Vol 250/51, pp 901-907, issn 0043-1648, 2Conference Paper

Characterization of submicron-size layer produced by pulsed bipolar plasma electrolytic carbonitridingTAVAKOLI, H; MOUSAVI KHOIE, S. M; MARASHI, S. P. H et al.Journal of alloys and compounds. 2014, Vol 583, pp 382-389, issn 0925-8388, 8 p.Article

Surface Integrity of Inconel 718 by Wire-EDM at Different Energy ModesLI, L; WEI, X. T; GUO, Y. B et al.Journal of materials engineering and performance. 2014, Vol 23, Num 8, pp 3051-3057, issn 1059-9495, 7 p.Article

Tool wear effects on white and dark layer formation in hard turning of AISI 52100 steelATTANASIO, A; UMBRELLO, D; CAPPELLINI, C et al.Wear. 2012, Vol 286-287, pp 98-107, issn 0043-1648, 10 p.Article

Investigation of influence of white layer geometry on spalling property in railway wheel steelKATO, T; SUGETA, A; NAKAYAMA, E et al.Wear. 2011, Vol 271, Num 1-2, pp 400-407, issn 0043-1648, 8 p.Conference Paper

Machinability and surface integrity of RR1000 nickel based superalloySOO, S. L; HOOD, R; ASPINWALL, D. K et al.CIRP annals. 2011, Vol 60, Num 1, pp 89-92, issn 0007-8506, 4 p.Conference Paper

Effect of surface integrity of hard turned AISI 52100 steel on fatigue performanceSMITH, Stephen; MELKOTE, Shreyes N; LARA-CURZIO, Edgar et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2007, Vol 459, Num 1-2, pp 337-346, issn 0921-5093, 10 p.Article

Influence of machining parameters on the white layer formation process and its characteristics in turning of hardened steelMEHMEDOVICI, M; SARICI, E; BULJUBASICI, I et al.Machining science and technology. 2007, Vol 11, Num 3, pp 313-334, issn 1091-0344, 22 p.Article

Inspection of white layer in hard turned components using electrochemical methodsHARRISON, Ian S; KURFESS, Thomas R; OLES, Edward J et al.Journal of manufacturing science and engineering. 2007, Vol 129, Num 2, pp 447-452, issn 1087-1357, 6 p.Article

Residual stresses and white layer in electric discharge machining (EDM)EKMEKCI, Bülent.Applied surface science. 2007, Vol 253, Num 23, pp 9234-9240, issn 0169-4332, 7 p.Article

Analysis of white layers formed in hard turning of AISI 52100 steelRAMESH, A; MELKOTE, S. N; ALLARD, L. F et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2005, Vol 390, Num 1-2, pp 88-97, issn 0921-5093, 10 p.Article

Surface integrity in finish hard turning of case-hardened steelsRECH, J; MOISAN, A.International journal of machine tools & manufacture. 2003, Vol 43, Num 5, pp 543-550, issn 0890-6955, 8 p.Article

Structural characterization of ion-nitrided AISI 5140 low-alloy steelALSARAN, Akgün; CELIK, Ayhan.Materials characterization. 2001, Vol 47, Num 3-4, pp 207-213, issn 1044-5803Article

Effect of white layer on the damping capacity of metal matrix compositesSIVA PRASAD, D; SHOBA, Ch; SRINIVASA PRASAD, B et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 591, pp 78-81, issn 0921-5093, 4 p.Article

Tribological characterization of rail squat defectsSIMON, S; SAULOT, A; DAYOT, C et al.Wear. 2013, Vol 297, Num 1-2, pp 926-942, issn 0043-1648, 17 p.Article

MODELING OF WHITE AND DARK LAYER FORMATION IN HARD MACHINING OF AISI 52100 BEARING STEELUMBRELLO, D; JAYAL, A. D; CARUSO, S et al.Machining science and technology. 2010, Vol 14, Num 1, pp 128-147, issn 1091-0344, 20 p.Article

Microstructure of the worn surfaces of a bainitic steel railway crossingZHANG, F. C; LV, B; ZHENG, C. L et al.Wear. 2010, Vol 268, Num 11-12, pp 1243-1249, issn 0043-1648, 7 p.Article

TOOL WEAR INFLUENCE ON WHITE AND DARK LAYERS IN HARD STEEL TURNINGATTANASIO, A; CAPPELLINI, C; CARUSO, S et al.Sciences de la matière. 2010, pp 171-180, issn 1272-2561, isbn 978-2-911256-27-1 978-2-911256-28-8, 2Vol, 10 p.Conference Paper