Titanium carbide derived nanoporous carbon for supercapacitor applicationsYUFENG ZHAO; WEI WANG; XIONG, Ding-Bang et al.International journal of hydrogen energy. 2012, Vol 37, Num 24, pp 19395-19400, issn 0360-3199, 6 p.Conference Paper

The Investigation and Growth Kinetics of TiC Coatings on AISI D3 Steel Produced by Thermo-Reactive Diffusion Technique = Untersuchung und Wachstumskinetiken von TiC-Beschichtungen auf mittels thermoreaktiver Diffusion gefertigtem AISI D3 StahlKURT, Bulent; SINOPLU, O; CARBOGA, Cemal et al.Praktische Metallographie. 2014, Vol 51, Num 2, pp 95-106, issn 0032-678X, 12 p.Article

The Influence of Ni-Coated TiC on Laser-Deposited IN625 Metal Matrix CompositesBAOLONG ZHENG; TOPPING, Troy; SMUGERESKY, John E et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2010, Vol 41, Num 3, pp 568-573, issn 1073-5623, 6 p.Article

Fabrication of TiC and TiB₂ locally reinforced steel matrix composites using a Fe-Ti-B₄C-C system by an SHS-casting routeZHIQIANG ZHANG; PING SHEN; YAN WANG et al.Journal of materials science. 2007, Vol 42, Num 19, pp 8350-8356, issn 0022-2461, 7 p.Article

FORMATION DE LA STRUCTURE DE L'ALLIAGE CARBURE DE TITANE-ACIER, OBTENU PAR IMPREGNATIONKIPARISOV SS; NARVA VK; DALYAEVA LI et al.1975; POROSHKOV. METALLURG., U.S.S.R.; S.S.S.R.; DA. 1975; NO 2; PP. 73-78; ABS. ANGL.; BIBL. 9 REF.Article

Joining C/C composite to copper using active Cu-3.5Si brazeYUANXUN SHEN; ZHENGLIN LI; CHUANYONG HAO et al.Journal of nuclear materials. 2012, Vol 421, Num 1-3, pp 28-31, issn 0022-3115, 4 p.Article

Improvement of the Mechanical Properties of Al-Si Alloys by TiC NanoparticlesBORODIANSKIY, Konstantin; KOSSENKO, Alexey; ZINIGRAD, Michael et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2013, Vol 44, Num 11, pp 4948-4953, issn 1073-5623, 6 p.Article

Mechanism of synthesizing nanocrystalline TiC in different milling atmospheresQUAN YUAN; YONG ZHENG; HAIJUN YU et al.International journal of refractory metals & hard materials. 2009, Vol 27, Num 4, pp 696-700, issn 0958-0611, 5 p.Article

Preparation of NiAl-TiC nanocomposite by mechanical alloyingZAKERI, M; RAHIMIPOUR, M. R; KHANMOHAMMADIAN, A et al.Journal of materials science. 2008, Vol 43, Num 21, pp 6912-6919, issn 0022-2461, 8 p.Article

Pore accessibility of Ti₃SiC₂-derived carbonsBAE, Jun-Seok; NGUYEN, Thanh X; BHATIA, Suresh K et al.Carbon (New York, NY). 2014, Vol 68, pp 531-541, issn 0008-6223, 11 p.Article

Simultaneous Fast Dehydrogenation of TiH₂ and Rapid Synthesis of TiB₂-TiC Through Self-Propagating High-Temperature Synthesis of TiH₂-B₄C SystemYANG, Y. F; MU, D. K.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 8, pp 3184-3188, issn 1073-5623, 5 p.Article

Nanoscale surface morphology of tungsten materials induced by Be-seeded D-He plasma exposureTOKUNAGA, K; BALDWIN, M. J; DOERNER, R. P et al.Journal of nuclear materials. 2011, Vol 417, Num 1-3, pp 528-532, issn 0022-3115, 5 p.Conference Paper

Combustion auto-propagée (SHS) dans les systèmes Ti-C, Ti-Al-C et Fe-Al = Abstract - Self-propagating high temperature synthesis (SHS) in the systems Ti-C, Ti-Al-C and Fe-AlAZEM, S; NECHICHE, M; TAIBI, K et al.Matériaux et techniques. 2011, Vol 99, Num 4, pp 449-456, issn 0032-6895, 8 p.Article

Microstructure and ablation behavior of carbon/carbon composites infiltrated with Zr―TiYI ZENG; XIANG XIONG; GUODONG LI et al.Carbon (New York, NY). 2013, Vol 54, pp 300-309, issn 0008-6223, 10 p.Article

Changes in structure and properties of carbide-steel cermets resulted from a heat treatmentFRAGE, Naum R; DARIEL, Moshe P; KAPUTKINA, Liudmila M et al.International journal of materials research. 2009, Vol 100, Num 3, pp 443-446, issn 1862-5282, 4 p.Conference Paper

Numerical Analysis of Hydrogen Trap State by TiC and V₄C₃ in bcc-FeKAWAKAMI, Kazuto; MATSUMIYA, Tooru.ISIJ international. 2012, Vol 52, Num 9, pp 1693-1697, issn 0915-1559, 5 p.Article

Microstructure of the Fe-based hardfacing layers reinforced by TiC-VC-Mo₂C particlesWANG, Xin-Hong; FANG HAN; QU, Shi-Yao et al.Surface & coatings technology. 2008, Vol 202, Num 8, pp 1502-1509, issn 0257-8972, 8 p.Article

Synthesis of TiC/NiTi composite powders in molten salt and their sinteringRUISONG YANG; LISHAN CUI; YANJUN ZHENG et al.Journal of materials science. 2008, Vol 43, Num 1, pp 98-101, issn 0022-2461, 4 p.Article

GRINDING HARDENABLE STEEL BONDED CARBIDE ALLOYS WITH DIAMOND WHEELSFREHN F; NOTTER AT.1979; INDUSTR. DIAM. REV.; GBR; DA. 1979-06; PP. 195-202; BIBL. 6 REF.Article

TRIBOLOGISCHE EIGENSCHAFT VON NICKELDISPERSIONSSCHICHTEN GRUNDLAGEN UND ANWENDUNGSBEISPIELE AUS DER PRAXIS = PROPRIETES TRIBOLOGIQUES DU NICKEL DURCI PAR DISPERSION. PRINCIPES ET EXEMPLES D'APPLICATIONS PRATIQUESWAGNER E; BROSZEIT E.1979; SCHMIERTECH. W. TRIBOL.; DEU; DA. 1979; VOL. 26; NO 1; PP. 17-20; BIBL. 5 REF.Article

VERSCHLEISSFESTE BESCHICHTUNG VON STAHL MIT DEM CVD-VERFAHREN = REVETEMENT RESISTANT A L'USURE SUR DE L'ACIER AVEC LE PROCEDE DE DEPOT EN PHASE VAPEURHORVATH E; HAPPEL O; PERRY AJ et al.1978; METALLOBERFLAECHE; DEU; DA. 1978; VOL. 32; NO 8; PP. 344-347; BIBL. 21 REF.Article

DEPOT EN PHASE VAPEUR. PROPRIETES DE TI, TIN ET TIC SUR FEROKAMOTO S; UMEZAWA A.1977; J. MECH. ENGNG LAB.; JAP.; DA. 1977; VOL. 31; NO 5; PP. 286-297; ABS. ANGL.; BIBL. 9 REF.Article

PLAQUETTES "CARBURE" REVETUESGIRARD J.1976; C.E.T.I.M. INFORM.; FR.; DA. 1976; NO 44; PP. 49-53Article

QUANTITATIVE ANALYSIS OF PARTICLE GROWTH IN TIC-NI ALLOYS.CHERMANT JL; COSTER M.1977; J. MICR.; G.B.; DA. 1977; VOL. 109; NO 3; PP. 269-281; BIBL. 24 REF.Article

TOURNAGE DE PIECES EN ACIER AVEC DES OUTILS A PLAQUETTES EN ALLIAGES DURS SANS TUNGSTENENODEL'MAN MO.1976; VEST. MASHINOSTR.; S.S.S.R.; DA. 1976; VOL. 56; NO 3; PP. 70-72Article