Enhancing compressive response of AZ31B magnesium alloy using alumina nanoparticulatesNGUYEN, Q. B; GUPTA, M.Composites science and technology. 2008, Vol 68, Num 10-11, pp 2185-2192, issn 0266-3538, 8 p.Article

Fabrication and characterisation of Al-7Si-0.35Mg/fly ash metal matrix composites processed by different stir casting routesRAJAN, T. P. D; PILLAI, R. M; PAI, B. C et al.Composites science and technology. 2007, Vol 67, Num 15-16, pp 3369-3377, issn 0266-3538, 9 p.Article

Mechanical characterization of lightweight polymer mortar modified with cork granulatesNOVOA, P. J. R. O; RIBEIRO, M. C. S; FERREIRA, A. J. M et al.Composites science and technology. 2004, Vol 64, Num 13-14, pp 2197-2205, issn 0266-3538, 9 p.Article

Processing, microstructure and properties of ultrasonically processed in situ MgO-Al₂O₃-MgAl₂O₄ dispersed magnesium alloy compositesBHINGOLE, P. P; CHAUDHARI, G. P; NATH, S. K et al.Composites. Part A, Applied science and manufacturing. 2014, Vol 66, pp 209-217, issn 1359-835X, 9 p.Article

Influence of natural fillers on the properties of starch-based biocomposite filmsBODIRLAU, Ruxanda; TEACA, Carmen-Alice; SPIRIDON, Iuliana et al.Composites. Part B, Engineering. 2013, Vol 44, Num 1, pp 575-583, issn 1359-8368, 9 p.Article

Effects of fiber surface chemistry and size on the structure and properties of poly(vinyl alcohol) composite films reinforced with electrospun fibersCHUNYI TANG; MEIYU WU; YIQIONG WU et al.Composites. Part A, Applied science and manufacturing. 2011, Vol 42, Num 9, pp 1100-1109, issn 1359-835X, 10 p.Article

Functionalized cellulose nanocrystals as biobased nucleation agents in poly(L-lactide) (PLLA) - Crystallization and mechanical property effectsAIHUA PEI; QI ZHOU; BERGLUND, Lars A et al.Composites science and technology. 2010, Vol 70, Num 5, pp 815-821, issn 0266-3538, 7 p.Article

Synthesis of nanocomposite films from wheat gluten matrix and MMT intercalated with different quaternary ammonium salts by way of hydroalcoholic solvent castingGUILHERME, Marcos R; MATTOSO, Luiz H. C; GONTARD, Nathalie et al.Composites. Part A, Applied science and manufacturing. 2010, Vol 41, Num 3, pp 375-382, issn 1359-835X, 8 p.Article

Cenosphere filled aluminum syntactic foam made through stir-casting techniqueMONDAL, D. P; DAS, S; RAMAKRISHNAN, N et al.Composites. Part A, Applied science and manufacturing. 2009, Vol 40, Num 3, pp 279-288, issn 1359-835X, 10 p.Article

Size control of in situ formed reinforcement in metal melts-theoretical treatment and application to in situ (AlN + Mg₂Si)/Mg compositesCONGFA ZHANG; TONGXIANG FAN; WEI CAO et al.Composites science and technology. 2009, Vol 69, Num 15-16, pp 2688-2694, issn 0266-3538, 7 p.Article

Solidification and casting/mould interfacial heat transfer characteristics of aluminum matrix compositesRAJAN, T. P. D; NARAYAN PRABHU, K; PILLAI, R. M et al.Composites science and technology. 2007, Vol 67, Num 1, pp 70-78, issn 0266-3538, 9 p.Article

Application of GA to optimize the process conditions of Al Matrix nano-compositesMOHSEN OSTAD SHABANI; MAZAHERY, Ali.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 185-191, issn 1359-8368, 7 p.Article

Effect of acoustic cavitation on ease of infiltration of molten aluminum alloys into carbon fiber bundles using ultrasonic infiltration methodMATSUNAGA, Tadashi; OGATA, Kenji; HATAYAMA, Tomei et al.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 3, pp 771-778, issn 1359-835X, 8 p.Article

Fabrication of in situ Al/Mg₂Si functionally graded materials by electromagnetic separation methodSONG, Chang-Jiang; XU, Zhen-Ming; LI, Jian-Guo et al.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 2, pp 427-433, issn 1359-835X, 7 p.Article

Sustainable waterborne polyurethane ionomer reinforced poly(vinyl alcohol) composite filmsXU, Chang-Lian; ZENG, Jian-Bing; WANG, Yu-Zhong et al.Composites science and technology. 2014, Vol 96, pp 109-115, issn 0266-3538, 7 p.Article

Effect of accelerated freeze―thaw cycling on mechanical properties of hybrid PVA and PE fiber-reinforced strain-hardening cement-based composites (SHCCs)YUN, Hyun-Do.Composites. Part B, Engineering. 2013, Vol 52, pp 11-20, issn 1359-8368, 10 p.Article

High thermal conductive polyvinyl alcohol composites with hexagonal boron nitride microplatelets as fillersXIE, Bin-Huan; XIAO HUANG; ZHANG, Guo-Jun et al.Composites science and technology. 2013, Vol 85, pp 98-103, issn 0266-3538, 6 p.Article

Influence of B₄C on the tribological and mechanical properties of Al 7075-B₄C compositesBARADESWARAN, A; ELAYA PERUMAL, A.Composites. Part B, Engineering. 2013, Vol 54, pp 146-152, issn 1359-8368, 7 p.Article

Analysis of active cooling through nickel coated carbon fibers in the solidification processing of aluminum matrix compositesGUPTA, Nikhil; NGUYEN, Nguyen Q; ROHATGI, Pradeep K et al.Composites. Part B, Engineering. 2011, Vol 42, Num 4, pp 916-925, issn 1359-8368, 10 p.Article

Fabrication and characterization of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds with poly (ethylene glycol) coating and dexamethasone releasingCHEN, L; TANG, C. Y; CHEN, D. Z et al.Composites science and technology. 2011, Vol 71, Num 16, pp 1842-1849, issn 0266-3538, 8 p.Article

Isocyanate-rich cellulose nanocrystals and their selective insertion in elastomeric polyurethaneRUEDA, L; FERNANDEZ D'ARLAS, B; ZHOU, Q et al.Composites science and technology. 2011, Vol 71, Num 16, pp 1953-1960, issn 0266-3538, 8 p.Article

Microstructure and interface characterization of a cast Mg₂B₂O₅ whisker reinforced AZ91 D magnesium alloy compositeCHEN, S. H; JIN, P. P; SCHUMACHER, G et al.Composites science and technology. 2010, Vol 70, Num 1, pp 123-129, issn 0266-3538, 7 p.Article

Biocomposites from wheat straw nanofibers : Morphology, thermal and mechanical propertiesALEMDAR, Ayse; SAIN, Mohini.Composites science and technology. 2008, Vol 68, Num 2, pp 557-565, issn 0266-3538, 9 p.Article

Optimisation of anionic polyamide-6 for vacuum infusion of thermoplastic composites : Influence of polymerisation temperature on matrix propertiesVAN RIJSWIJK, K; BERSEE, H. E. N; BEUKERS, A et al.Polymer testing. 2006, Vol 25, Num 3, pp 392-404, issn 0142-9418, 13 p.Article

Computational and experimental analysis of particulate distribution during Al-SiC MMC fabricationNAHER, S; BRABAZON, D; LOONEY, L et al.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 3, pp 719-729, issn 1359-835X, 11 p.Article