The role of the substrate in micro-scale scratching of epoxy-polyester filmsBARLETTA, M; GISARIO, A.Applied surface science. 2011, Vol 257, Num 9, pp 4449-4463, issn 0169-4332, 15 p.Article

Correlation between the sensorial perception and the descriptive instrumental analysis of the tackiness of silicone elastomersMITH, Setha; CARPENTIER, Luc; MONTEIL, Guy et al.Surface and interface analysis. 2008, Vol 40, Num 3-4, pp 142-145, issn 0142-2421, 4 p.Conference Paper

Comparison of nano-indentation hardness to microhardnessLINMAO QIAN; MING LI; ZHONGRONG ZHOU et al.Surface & coatings technology. 2005, Vol 195, Num 2-3, pp 264-271, issn 0257-8972, 8 p.Article

Critical review of analysis and interpretation of nanoindentation test dataFISCHER-CRIPPS, A. C.Surface & coatings technology. 2006, Vol 200, Num 14-15, pp 4153-4165, issn 0257-8972, 13 p.Article

Interprétation du module d'indentation dans le cas des matériaux anisotropes et/ou actifs : Indentation à différentes échelles = Interpretation of the indentation modulus in the case of anisotropic materials and/or smart materialsDELOBELLE, P; DALI, S; RICHARD, F et al.Matériaux et techniques. 2011, Vol 99, Num 2, pp 185-196, issn 0032-6895, 12 p.Article

Dent Resistance and Effect of Indentation Loading Rate on Superelastic TiNi AlloyFARHAT, Zoheir; JARJOURA, George; SHAHIRNIA, Meisam et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2013, Vol 44, Num 8, pp 3544-3551, issn 1073-5623, 8 p.Article

Analysis of the differential (alternating current) technique for measuring Young's modulus during ultra-low load indentationSÖDERLUND, E; MACMILLAN, N. H.Journal of materials science letters. 1991, Vol 10, Num 12, pp 720-722, issn 0261-8028Article

Nanomechanical Testing : Comparison between conventional Vickers hardness and indentation hardness obtained with different instrumentsCHUDOBA, T; GRIEPENTROG, M.Zeitschrift für Metallkunde. 2005, Vol 96, Num 11, pp 1242-1246, issn 0044-3093, 5 p.Conference Paper

Depth-sensing indentation of nanomaterials and nanostructuresPALACIO, Manuel L. B; BHUSHAN, Bharat.Materials characterization. 2013, Vol 78, pp 1-20, issn 1044-5803, 20 p.Article

The crustacean exoskeleton as an example of a structurally and mechanically graded biological nanocomposite materialRAABE, D; SACHS, C; ROMANO, P et al.Acta materialia. 2005, Vol 53, Num 15, pp 4281-4292, issn 1359-6454, 12 p.Article

Cluster Issue on IndentationMUNAWAR CHAUDHRI, M; YONG YEE LIM.Journal of physics. D, Applied physics (Print). 2008, Vol 41, Num 7, pp 070301.1-074029.7, issn 0022-3727Conference Proceedings

Mechanical properties of a single gecko setaHUBER, Gerrit; ORSO, Steffen; SPOLENAK, Ralph et al.International journal of materials research. 2008, Vol 99, Num 10, pp 1113-1118, issn 1862-5282, 6 p.Article

Étude de l'effet d'un support sphérique utilisé pour la macroindentation des tôles métalliques : Indentation à différentes échelles = A study on the effect of a spherical sample holder used for the macroindentation of metallic sheetsBRAMMER, P; MAUVOISIN, G; BARTIER, O et al.Matériaux et techniques. 2011, Vol 99, Num 2, pp 219-225, issn 0032-6895, 7 p.Article

The depth dependence of the indentation creep of polycrystalline gold at 300 KBHAKHRI, V; KLASSEN, R. J.Scripta materialia. 2006, Vol 55, Num 4, pp 395-398, issn 1359-6462, 4 p.Article

Elastomeric behavior of exfoliated graphite, as shown by instrumented indentation testingCHEN, Po-Hsiu; CHUNG, D. D. L.Carbon (New York, NY). 2015, Vol 81, pp 505-513, issn 0008-6223, 9 p.Article

Indentation technique provides pipeline integrity monitoringHAGGAG, Fahmy M.Oil & gas journal. 2006, Vol 104, Num 30, pp 58-62, issn 0030-1388, 5 p.Article

Détermination expérimentale du profil extrémal de l'indenteur de Berkovich et correction conséquente du modèle du cycle d'indentation = Experimental determination of the Berkovich tip shape and consequent correction to the indentation cycle modelATTAF, M. T.Matériaux et techniques. 2003, Vol 91, Num 5-6, pp 17-24, issn 0032-6895, 8 p.Article

Indentation hardness of biomorphic SiCGUTIERREZ-MORA, F; GORETTA, K. C; VARELA-FERIA, F. M et al.International journal of refractory metals & hard materials. 2005, Vol 23, Num 4-6, pp 369-374, issn 0958-0611, 6 p.Conference Paper

Simultaneous estimate of elastic/plastic parameters in depth-sensing indentation testsSAKAI, M.Scripta materialia. 2004, Vol 51, Num 5, pp 391-395, issn 1359-6462, 5 p.Article

Prediction of Indentation Behavior of Superelastic TiNiNEUPANE, Rabin; FARHAT, Zoheir.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 10, pp 4350-4360, issn 1073-5623, 11 p.Article

Effect of the indenter size on the indentation of aluminumFUQIAN YANG; LINGLING PENG; OKAZAKI, Kenji et al.Materials characterization. 2006, Vol 57, Num 4-5, pp 321-325, issn 1044-5803, 5 p.Article

Untersuchungen zum Einfluss der Kornorientierung auf Nanoindentations-Messungen an Reineisen = On the Influence of Grain Orientation on Nanoindentation Testing of Pure IronPFETZING, Janine; WAGNER, Martin F.-X; ZARNETTA, Robert et al.Praktische Metallographie. 2009, Vol 46, Num 2, pp 63-76, issn 0032-678X, 14 p.Article

Caractérisation par nano-indentation de propriétés élastoplastiques de microhétérogénéités dans les matériaux à base métallique = Characterization by nano-indentation of elastoplastic properties of microheterogeneities in the metal-based materialsELGHAZAL, H; LAMAGNERE, P; VERGNE, F et al.Journal de physique. IV. 1998, Vol 8, Num 4, pp Pr4.133-Pr4.138, issn 1155-4339Conference Paper

Identification of model parameters from elastic/elasto-plastic spherical indentationNIEDERKOFLER, Thomas; JÄGER, Andreas; LACKNER, Roman et al.International journal of materials research. 2009, Vol 100, Num 7, pp 926-932, issn 1862-5282, 7 p.Article

Yield inception of a soft coating on a flat substrate indented by a rigid sphereWENPING SONG; LONGQIU LI; ETSION, Izhak et al.Surface & coatings technology. 2014, Vol 240, pp 444-449, issn 0257-8972, 6 p.Article