Metal foams- : high temperature colloids Part I. Ex situ analysis of metal foamsBABCSAN, N; LEITLMEIER, D; BANHART, J et al.Colloids and surfaces. A, Physicochemical and engineering aspects. 2005, Vol 261, Num 1-3, pp 123-130, issn 0927-7757, 8 p.Conference Paper

X-ray radioscopy of liquid metalfoams : influence of heating profile, atmosphere and pressureGARCIA-MORENO, Francisco; BABCSAN, Norbert; BANHART, John et al.Colloids and surfaces. A, Physicochemical and engineering aspects. 2005, Vol 263, Num 1-3, pp 290-294, issn 0927-7757, 5 p.Article

Metal foams: towards microcellular materialsGARCIA-MORENO, Francisco; MUKHERJEE, Manas; SOLORZANO, Eusebio et al.International journal of materials research. 2010, Vol 101, Num 9, pp 1134-1139, issn 1862-5282, 6 p.Article

Influence of cell wall shape and density on the mechanical behaviour of 2D foam structuresHARDERS, Harald; HUPFER, Knut; RÖSLER, Joachim et al.Acta materialia. 2005, Vol 53, Num 5, pp 1335-1345, issn 1359-6454, 11 p.Article

The influence of strain-induced damage on the mechanical response of open-cell aluminum foamAMSTERDAM, E; DE VRIES, J. H. B; DE HOSSON, J. Th. M et al.Acta materialia. 2008, Vol 56, Num 3, pp 609-618, issn 1359-6454, 10 p.Article

Cast-Replicated NiTiCu Foams with Superelastic PropertiesYOUNG, Marcus L; DEFOUW, John D; FRENZEL, Jan et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2012, Vol 43, Num 8, pp 2939-2944, issn 1073-5623, 6 p.Article

Collapse of Aluminum Foam in Two Different AtmospheresMUKHERJEE, M; GARCIA-MORENO, F; BANHART, J et al.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2010, Vol 41, Num 3, pp 500-504, issn 1073-5615, 5 p.Article

Comparison of metal foam and louvered fins as air-side heat transfer enhancement media for miniaturized condensersRIBEIRO, Guilherme B; BARBOSA, Jader R.Applied thermal engineering. 2013, Vol 51, Num 1-2, pp 334-337, issn 1359-4311, 4 p.Article

Analysis of pore interconnectivity in bioactive glass foams using X-ray microtomographyATWOOD, R. C; JONES, J. R; LEE, P. D et al.Scripta materialia. 2004, Vol 51, Num 11, pp 1029-1033, issn 1359-6462, 5 p.Article

Amorphous Zr-Based Foams with Aligned, Elongated PoresCOX, Marie E; MATHAUDHU, Suveen N; HARTWIG, K. Ted et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2010, Vol 41, Num 7, pp 1706-1713, issn 1073-5623, 8 p.Conference Paper

Metal foams : High temperature colloids. Part II: In situ analysis of metal foamsBABCSAN, N; GARCIA MORENO, F; BANHART, J et al.Colloids and surfaces. A, Physicochemical and engineering aspects. 2007, Vol 309, Num 1-3, pp 254-263, issn 0927-7757, 10 p.Conference Paper

Numerical study of heat transfer enhancement in the receiver tube of direct steam generation with parabolic trough by inserting metal foamsWANG, P; LIU, D. Y; XU, C et al.Applied energy. 2013, Vol 102, pp 449-460, issn 0306-2619, 12 p.Article

Simultaneous determination of intrinsic solid phase conductivity and effective thermal conductivity of Kelvin like foamsKUMAR, Prashant; TOPIN, Frederic.Applied thermal engineering. 2014, Vol 71, Num 1, pp 536-547, issn 1359-4311, 12 p.Article

Foamed aluminum parts by investment castingCINGI, Celal; NIINI, Eero; ORKAS, Juhani et al.Colloids and surfaces. A, Physicochemical and engineering aspects. 2009, Vol 344, Num 1-3, pp 113-117, issn 0927-7757, 5 p.Conference Paper

Effect of face sheet material on the indentation response of metallic foamsMOHAN, Kapil; YIP, Tick-Hon; SRIDHAR, Idapalapati et al.Journal of materials science. 2007, Vol 42, Num 11, pp 3714-3723, issn 0022-2461, 10 p.Article

Mechanical behaviour of cellular solids : Continuum modeling of strain localization phenomena in metallic foamsFOREST, S; BLAZY, J.-S; CHASTEL, Y et al.Journal of materials science. 2005, Vol 40, Num 22, pp 5903-5910, issn 0022-2461, 8 p.Conference Paper

Simulation of aluminum foam formation and distribution uniformityWANG DEQING; SUN CHENGXIN.Journal of materials science. 2008, Vol 43, Num 8, pp 2825-2832, issn 0022-2461, 8 p.Article

Thermal hydraulic performance of 10 PPI aluminium foam as alternative for louvered fins in an HVAC heat exchangerDESCHAMPHELEIRE, Sven; DE JAEGER, Peter; HUISSEUNE, Henk et al.Applied thermal engineering. 2013, Vol 51, Num 1-2, pp 371-382, issn 1359-4311, 12 p.Article

Synthesis and characterization of amino-functionalized mesostructured cellular foams with large mesopores using microemulsion templatingXIN ZHANG; FENG ZHANG; CHAN, Kwong-Yu et al.Scripta materialia. 2004, Vol 51, Num 4, pp 343-347, issn 1359-6462, 5 p.Article

Metal foams as compact high performance heat exchangersBOOMSMA, K; POULIKAKOS, D; ZWICK, F et al.Mechanics of materials. 2003, Vol 35, Num 12, pp 1161-1176, issn 0167-6636, 16 p.Article

A Model of Foam FiltersCIFTJA, Arjan; ABEL ENGH, Thorvald; TANGSTAD, Merete et al.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2010, Vol 41, Num 1, pp 146-150, issn 1073-5615, 5 p.Article

A PEM fuel cell with metal foam as flow distributorTSENG, Chung-Jen; TSANG TSAI, Bin; LIU, Zhong-Sheng et al.Energy conversion and management. 2012, Vol 62, pp 14-21, issn 0196-8904, 8 p.Article

Synthesis of stochastic open cell Ni-based foamsQUEHEILLALT, Douglas T; KATSUMURA, Yasushi; WADLEY, Haydn N. G et al.Scripta materialia. 2004, Vol 50, Num 3, pp 313-317, issn 1359-6462, 5 p.Article

Damage accumulation model for aluminium-closed cell foams subjected to fully reversed cyclic loadingPINTO, H; ARWADE, S. R.Fatigue & fracture of engineering materials & structures (Print). 2011, Vol 34, Num 12, pp 1021-1034, issn 8756-758X, 14 p.Article

Thermophysical properties of Al and Mg alloys for metal foam fabricationPARK, Soo-Han; UM, Yong-Su; KUM, Chang-Hoon et al.Colloids and surfaces. A, Physicochemical and engineering aspects. 2005, Vol 263, Num 1-3, pp 280-283, issn 0927-7757, 4 p.Article