Thermal, Mechanical, and Morphological Investigation of Injection Molded Poly(trimethylene terephthalate)/ Carbon Fiber CompositesVIVEKANANDHAN, Singaravelu; MISRA, Manjusri; KUMAR MOHANTY, Amar et al.Polymer composites. 2012, Vol 33, Num 11, pp 1933-1940, issn 0272-8397, 8 p.Article

Poly(lactic acid)-Based Systems Filled With Talc Microparticles: Thermal, Structural, and Morphological IssuesRUSSO, Pietro; ACIERNO, Domenico; VIGNALI, Adriano et al.Polymer composites. 2014, Vol 35, Num 6, pp 1093-1103, issn 0272-8397, 11 p.Article

Heat resistant properties of PP/Al(OH)₃/Mg(OH)₂ flame retardant compositesLIANG, J. Z; ZHANG, Y. J; JIANG, X. H et al.Polymer bulletin (Berlin. Print). 2011, Vol 66, Num 2, pp 289-299, issn 0170-0839, 11 p.Article

Influence of talc particle size and content on crystallization behavior, mechanical properties and morphology of poly(lactic acid)PETCHWATTANA, Nawadon; COVAVISARUCH, Sirijutaratana; PETTHAI, Sarawut et al.Polymer bulletin (Berlin. Print). 2014, Vol 71, Num 8, pp 1947-1959, issn 0170-0839, 13 p.Article

Mechanical and Thermal Properties of Thermoplastic Polyurethane-Toughened Polylactide-Based NanocompositesLIU, Zheng-Wei; CHOU, Hung-Chia; CHEN, Szu-Hsien et al.Polymer composites. 2014, Vol 35, Num 9, pp 1744-1757, issn 0272-8397, 14 p.Article

Crystallization of Polycarbonate in Solvent/Nonsolvent System and Its Application to High-Density Polyethylene Composite as a FillerDUCK KUN HWANG; HEON SANG LEE; HYUN JONG KIM et al.Polymer engineering and science. 2014, Vol 54, Num 8, pp 1893-1899, issn 0032-3888, 7 p.Article

Poly(L-lactic acid) metal organic framework composites: optical, thermal and mechanical propertiesELANGOVAN, Dhayalan; YUZAY, Isinay E; SELKE, Susan E. M et al.Polymer international. 2012, Vol 61, Num 1, pp 30-37, issn 0959-8103, 8 p.Article

Use of Eco-Friendly Epoxy Resins From Renewable Resources as Potential Substitutes of Petrochemical Epoxy Resins for Ambient Cured Composites With Flax ReinforcementsBERTOMEU, D; GARCIA-SANOGUERA, D; FENOLLAR, O et al.Polymer composites. 2012, Vol 33, Num 5, pp 683-692, issn 0272-8397, 10 p.Article

Thermal processability and properties of highly filled poly(vinyl alcohol)/talc compositeWANG, B; WANG, Q; LI, L et al.Plastics, rubber and composites. 2013, Vol 42, Num 9, pp 367-373, issn 1465-8011, 7 p.Article

Development of Semitransparent Wood-Polymer CompositesDIAS, Paulo A. N; ALVES, Jose A. C; FAGG, Duncan Paul et al.Journal of vinyl & additive technology. 2012, Vol 18, Num 2, pp 95-104, issn 1083-5601, 10 p.Article

Recycled-Disposable-Chopstick-Fiber-Reinforced Polypropylene Green CompositesSHIH, Yeng-Fong; CHEN, Po-Wei; WU, Chin-San et al.Journal of applied polymer science. 2012, Vol 123, Num 5, pp 3046-3053, issn 0021-8995, 8 p.Article

The Crystallization Behavior and Mechanical Properties of Polylactic Acid in the Presence of a Crystal Nucleating AgentZHAOBIN TANG; CHUANZHI ZHANG; XIAOQING LIU et al.Journal of applied polymer science. 2012, Vol 125, Num 2, pp 1108-1115, issn 0021-8995, 8 p.Article

Bamboo Fiber Reinforced Polypropylene Composites and Their Mechanical, Thermal, and Morphological PropertiesCHATTOPADHYAY, Sanjay K; KHANDAL, R. K; UPPALURI, Ramagopal et al.Journal of applied polymer science (Print). 2011, Vol 119, Num 3, pp 1619-1626, issn 0021-8995, 8 p.Article

Structure―property relationships and modeling of the mechanical properties of a high-temperature resistant thermoset nanocompositeFARAZ, M. I; BESSELING, N. A. M; KOROBKO, A. V et al.Composites. Part B, Engineering. 2014, Vol 56, pp 9-14, issn 1359-8368, 6 p.Article

Effect of Compatibilizer and Fillers on the Properties of Injection Molded Lignin-Based Hybrid Green CompositesSAHOO, Saswata; MISRA, Manjusri; MOHANTY, Amar K et al.Journal of applied polymer science. 2013, Vol 127, Num 5, pp 4110-4121, issn 0021-8995, 12 p.Article

Influence of high loaded wood flour and coupling agent (m-TMI-g-PP) content on properties of wood flour/polypropyleneCHUIGEN GUO; LICHUN MA; CAIYING SUN et al.Journal of adhesion science and technology. 2013, Vol 27, Num 8, pp 912-923, issn 0169-4243, 12 p.Article

The Role of Polycarbonate Molecular Weight in the Poly(L-lactide) Blends Compatibilized With Poly(butylene succinate-co-L-lactate)WANG, Y; CHIAO, S. M; LAI, M.-T et al.Polymer engineering and science. 2013, Vol 53, Num 6, pp 1171-1180, issn 0032-3888, 10 p.Article

Thermoplastic Composites of Polyamide-12 Reinforced by Cellulose Nanofibers with Cationic Surface ModificationSEMBA, Takeshi; ITO, Akihiro; KITAGAWA, Kazuo et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 20, issn 0021-8995, 40920.1-40920.9Article

Composites and nanocomposites of ABS: Synergy between glass fiber and nano-sepioliteBASURTO, F. C; GARCIA-LOPEZ, D; VILLARREAL-BASTARDO, N et al.Composites. Part B, Engineering. 2013, Vol 47, pp 42-47, issn 1359-8368, 6 p.Article

Morphology and Properties of Highly Talc- and CaCO₃-Filled Poly(vinyl alcohol) Composites Prepared by Melt ProcessingBIN WANG; QI WANG; LI LI et al.Journal of applied polymer science (Print). 2013, Vol 130, Num 5, pp 3050-3057, issn 0021-8995, 8 p.Article

Poly(L-lactide)/Polypropylene Blends: Evaluation of Mechanical, Thermal, and Morphological CharacteristicsCHOUDHARY, Priyanka; MOHANTY, Smita; NAYAK, Sanjay K et al.Journal of applied polymer science (Print). 2011, Vol 121, Num 6, pp 3223-3237, issn 0021-8995, 15 p.Article

PLA and PP composites with enzyme modified oil palm fibre: A comparative studyMAMUN, Abdullah A; HEIM, Hans-Peter; DALOUR HOSSEN BEG et al.Composites. Part A, Applied science and manufacturing. 2013, Vol 53, pp 160-167, issn 1359-835X, 8 p.Article

Study on Effects of Short Glass Fiber Reinforcement on the Mechanical and Thermal Properties of PC/ABS CompositesWEIHUA WANG; GUOQUN ZHAO; YANJIN GUAN et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 17, issn 0021-8995, 40697.1-40697.12Article

Influence of Temperature on Mechanical Properties of Jute/Biopolymer CompositesLØVDAL, Alexandra; LOCKE LAURSEN, Louise; LOGSTRUP ANDERSEN, Tom et al.Journal of applied polymer science. 2013, Vol 128, Num 3, pp 2038-2045, issn 0021-8995, 8 p.Article

Optimization of the Property Profile of Poly-L-Lactide by Synthesis of PLLA-Polystyrene-Block CopolymersDORFF, Giselher; HAHN, Mathias; LASCHEWSKY, André et al.Journal of applied polymer science. 2013, Vol 127, Num 1, pp 120-126, issn 0021-8995, 7 p.Article