Microstructure and wear properties of WC particle reinforced composite coating on Ti6Al4V alloy produced by the plasma transferred arc methodCELIK, Osman Nuri.Applied surface science. 2013, Vol 274, pp 334-340, issn 0169-4332, 7 p.Article

The cytocompatibility investigation of Ti6Al4V modified with a fluorine-contained copolymer thin filmYIJUN LIU; JIA LUO; BINLIU et al.Applied surface science. 2011, Vol 257, Num 15, pp 6429-6434, issn 0169-4332, 6 p.Article

Structure and tribological performance by nitrogen and oxygen plasma based ion implantation on Ti6Al4V alloyXINGGUO FENG; MINGREN SUN; XINXIN MA et al.Applied surface science. 2011, Vol 257, Num 23, pp 9904-9908, issn 0169-4332, 5 p.Article

Failure analysis of two Ti-alloy total hip arthroplasty femoral stems fractured in vivoMAGNISSALIS, E. A; ZINELIS, S; KARACHALIOS, Th et al.Journal of biomedical materials research. 2003, Vol 66B, Num 1, pp 299-305, issn 0021-9304, 7 p.Article

Water repellency of hierarchical superhydrophobic Ti6Al4V surfaces improved by secondary nanostructuresYIZHOU SHEN; HAIJUN TAO; SHANLONG CHEN et al.Applied surface science. 2014, Vol 321, pp 469-474, issn 0169-4332, 6 p.Article

Solar gas nitriding of Ti6Al4V alloyRODRIGUEZ, Gloria P; HERRANZ, Gemma; ROMERO, Ana et al.Applied surface science. 2013, Vol 283, pp 445-452, issn 0169-4332, 8 p.Article

Morphology and performances of the anodic oxide films on Ti6Al4V alloy formed in alkaline-silicate electrolyte with aminopropyl silane addition under low potentialJIALI CHEN; JINWEI WANG; HONGYE YUAN et al.Applied surface science. 2013, Vol 284, pp 900-906, issn 0169-4332, 7 p.Article

Antibacterial and bioactive nanostructured titanium surfaces for bone integrationFERRARIS, S; VENTURELLO, A; MIOLA, M et al.Applied surface science. 2014, Vol 311, pp 279-291, issn 0169-4332, 13 p.Article

Effect of hydrogen on diffusion bonding of TiAl-based intermetallics and Ni-based superalloy using hydrogenated Ti₆Al₄V interlayerPENG HE; JUN WANG; TIESONG LIN et al.International journal of hydrogen energy. 2014, Vol 39, Num 4, pp 1882-1887, issn 0360-3199, 6 p.Article

Friction and wear properties of Ti6Al4V/WC-Co in cold atmospheric plasma jetWENJI XU; XIN LIU; JINLONG SONG et al.Applied surface science. 2012, Vol 259, pp 616-623, issn 0169-4332, 8 p.Article

Characteristics and cyto-compatibility of Collagen/Ca-P coatings on Ti6Al4V substrateWANG, Rex C.-C; HSIEH, Ming-Che; YANG, Shih-Ping et al.Surface & coatings technology. 2011, Vol 205, Num 19, pp 4683-4689, issn 0257-8972, 7 p.Article

On the correlation between Nd:YAG laser-induced wettability characteristics modification and osteoblast cell bioactivity on a titanium alloyLAWRENCE, J; HAO, L; CHEW, H. R et al.Surface & coatings technology. 2006, Vol 200, Num 18-19, pp 5581-5589, issn 0257-8972, 9 p.Article

Fatigue property improvements of Ti―6Al―4V by thin film coatings of metallic glass and TiN: a comparison studyLEE, C. M; CHU, J. P; CHANG, W. Z et al.Thin solid films. 2014, Vol 561, pp 33-37, issn 0040-6090, 5 p.Article

Nanocrystalline diamond thin films grown on Ti6Al4V alloyZHANG, C. Z; LI, Y. S; TANG, Y et al.Thin solid films. 2013, Vol 527, pp 59-64, issn 0040-6090, 6 p.Article

Material morphological characteristics in laser ablation of alpha case from titanium alloyLIYANG YUE; ZENGBO WANG; LIN LI et al.Applied surface science. 2012, Vol 258, Num 20, pp 8065-8071, issn 0169-4332, 7 p.Article

Microstructure and tribological behaviors of Ti6Al4V alloy treated by plasma Ni alloyingZHENXIA WANG; ZHIYONG HE; YINGQIN WANG et al.Applied surface science. 2011, Vol 257, Num 23, pp 10267-10272, issn 0169-4332, 6 p.Article

Novel lubricated surface of titanium alloy based on porous structure and hydrophilic polymer brushesKUN WANG; DANGSHENG XIONG; YUXIANG NIU et al.Applied surface science. 2014, Vol 317, pp 875-883, issn 0169-4332, 9 p.Article

Characterization of implant materials in fetal bovine serum and sodium sulfate by electrochemical impedance spectroscopy. II. Coarsely sandblasted samplesCONTU, F; ELSENER, B; BÖHNI, H et al.Journal of biomedical materials research. 2003, Vol 67A, Num 1, pp 246-254, issn 0021-9304, 9 p.Article

The effect of nitric acid surface treatment on CaP deposition of Ti6Al4V open-cell foams in SBF solutionTURKAN, U; GUDEN, M.Surface & coatings technology. 2010, Vol 205, Num 7, pp 1904-1916, issn 0257-8972, 13 p.Article

Influence of slight microstructural gradients on the surface properties of Ti6Al4V irradiated by UVGALLARDO-MORENO, A. M; MULTIGNER, M; PACHA-OLIVENZA, M. A et al.Applied surface science. 2009, Vol 255, Num 22, pp 9105-9111, issn 0169-4332, 7 p.Article

Study on bacteria adherence properties of Mo surface-modified layer in Ti₆Al₄V alloy prepared by plasma surface alloying techniqueFAN AILAN; QIN LIN; TIAN LINHAI et al.Applied surface science. 2008, Vol 255, Num 2, pp 419-421, issn 0169-4332, 3 p.Conference Paper

ISOTHERMES UMFORMEN = LE FORMAGE ISOTHERMEGESSINGER GH.1978; FERTIGUNG; CHE; DA. 1978; VOL. 9; NO 4; PP. 107-112; ABS. FRE/ENGArticle

AN EVALUATION OF THE RING TEST FOR STRAIN-RATE-SENSITIVE MATERIALS.GARMONG G; PATON NE; CHESNUTT JC et al.1977; METALLURG. TRANS. A; U.S.A.; DA. 1977; VOL. 8; NO 12; PP. 2026-2027; BIBL. 6 REF.Article

Ti6Al4V coating for carbon/carbon composites synthesized by magnetron sputtering: microstructure and in-vitro biotestsZHANG, Lei-Lei; LI, He-Jun; LU, Jin-Hua et al.Surface and interface analysis. 2013, Vol 45, Num 6, pp 973-977, issn 0142-2421, 5 p.Article

Effects of Ti and TiC ceramic powder on laser-cladded Ti―6Al―4V in situ intermetallic compositeOCHONOGOR, O. F; MEACOCK, C; ABDULWAHAB, M et al.Applied surface science. 2012, Vol 263, pp 591-596, issn 0169-4332, 6 p.Article