Wear rate, frictional temperature, and energy consumption of steel 52100 with different microstructures during slidingLI, W; WANG, Y; YAN, M. F et al.Journal of materials science. 2005, Vol 40, Num 21, pp 5635-5640, issn 0022-2461, 6 p.Article

The effect of grit size and asperity blunting on abrasive wearTORRANCE, A. A.Wear. 2002, Vol 253, Num 7-8, pp 813-819, issn 0043-1648, 7 p.Article

Recent developments in wear-mechanism mapsLIM, S. C.Tribology international. 1998, Vol 31, Num 1-3, pp 87-97, issn 0301-679XConference Paper

Auswirkung verschiedener Nanopulver (NanoVit) im Epoxidharz auf den VerschleissSCHÄDEL, B; RÜDIGER, G; JACOBS, O et al.Tribologie und Schmierungstechnik. 2008, Vol 55, Num 3, pp 10-16, issn 0724-3472, 7 p.Article

Tribologische Kennwerte für Reibwerkstoffe = Tribology parameters for friction materialsTREPTE, St.Materialwissenschaft und Werkstofftechnik. 2002, Vol 33, Num 3, pp 142-154, issn 0933-5137Article

Strategies to control wheel profile wearFRÖHLING, Robert.Vehicle System Dynamics. 2002, Vol 37, pp 490-501, issn 0042-3114, 12 p., SUPConference Paper

A modified, filtered, pulsed cathodic vacuum arc implantation and deposition apparatus with the filtering duct working as a second anodeWANG GUANGFU; ZHANG HUIXING; ZHANG XIAOJI et al.Surface & coatings technology. 2000, Vol 128-29, pp 470-473, issn 0257-8972Conference Paper

A comparison of the tribological behaviour of Y-TZP in tea and coffee under micro-abrasion conditions : SPECIAL CLUSTER ISSUE ON TRIBOCORROSION OF DENTAL MATERIALSSHARIFI, S; STACK, M. M.Journal of physics. D, Applied physics (Print). 2013, Vol 46, Num 40, issn 0022-3727, 404008.1-404008.11Article

Rapid determination of erosion rates with electron beam SNMSGOSCHNICK, J; FICHTNER, M; SCHNEIDER, T et al.Fresenius' journal of analytical chemistry. 1995, Vol 353, Num 5-8, pp 598-602, issn 0937-0633Conference Paper

Tribological properties of ultrananocrystalline diamond films in various test atmosphereKUMAR, N; SHARMA, Neha; DASH, S et al.Tribology international. 2011, Vol 44, Num 12, pp 2042-2049, issn 0301-679X, 8 p.Article

Porcelain tile microstructure : implications for polishabilityHUTCHINGS, I. M; XU, Y; SANCHEZ, E et al.Journal of the European Ceramic Society. 2006, Vol 26, Num 6, pp 1035-1042, issn 0955-2219, 8 p.Article

Effects of abrasive size distribution in chemical mechanical planarization: Modeling and verificationJIANFENG LUO; DOMFELD, David A.IEEE transactions on semiconductor manufacturing. 2003, Vol 16, Num 3, pp 469-476, issn 0894-6507, 8 p.Article

Friction modification of WC-Co by ion implantationYU, L. D; SHUY, G. W; VILAITHONG, T et al.Surface & coatings technology. 2000, Vol 128-29, pp 404-409, issn 0257-8972Conference Paper

The development of sputtered carbon based coatings incorporating Cr, Ti, B and NYANG, S; JONES, A. H. S; TEER, D. G et al.Surface & coatings technology. 2000, Vol 133-34, pp 369-375, issn 0257-8972Conference Paper

Predicting critical erosion-corrosion limits of alloys for oil and gas productionCRAIG, B. D.Materials performance. 1998, Vol 37, Num 9, pp 59-60, issn 0094-1492Article

Multilayer hard carbon films with low wear ratesAGER, J. W; ANDERS, S; BROWN, I. G et al.Surface & coatings technology. 1997, Vol 91, Num 1-2, pp 91-94, issn 0257-8972Article

Sliding wear of titaniumKAILAS, S. V; BISWAS, S. K.Journal of tribology. 1997, Vol 119, Num 1, pp 31-35, issn 0742-4787Article

The effect of disk roughness on the wear of contact recording headsSUK, M.Journal of tribology. 1996, Vol 118, Num 4, pp 794-799, issn 0742-4787Article

Microwear mechanisms of coatingsKATO, K.Surface & coatings technology. 1995, Vol 76-77, Num 1-3, pp 469-474, issn 0257-8972, 2Conference Paper

A study on the correlation between electrochemical corrosion and chemical mechanical polishing performance of W and Ti filmSEO, Yong-Jin.Microelectronic engineering. 2007, Vol 84, Num 12, pp 2769-2774, issn 0167-9317, 6 p.Article

Recycling method for used slurry by annealed filteringSEO, Y.-J; KIM, N.-H; LEE, W-S et al.Electronics Letters. 2004, Vol 40, Num 24, pp 1553-1554, issn 0013-5194, 2 p.Article

Manufacturing of micro electrodes using ultra sonic aided electrochemical machiningWENG, Feng-Tsai; HSU, Chen-Siang; SHYU, R. F et al.Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS. 2003, pp 399-401, isbn 0-7803-7066-X, 1Vol, 3 p.Conference Paper

Wear behaviour of Ni-Cr-Mo-V steel under dry slidingPATHAK, J. P; MOHAN, S.Zeitschrift für Metallkunde. 2002, Vol 93, Num 11, pp 1140-1145, issn 0044-3093, 6 p.Article

Prediction of critical load and wear rate of coatings by fuzzy theoryZHANG, Z; ZHANG, L; MAI, Y.-W et al.Materials and manufacturing processes. 1997, Vol 12, Num 2, pp 345-357, issn 1042-6914Article

Nanometric material removal using the electrokinetic phenomenonLEO CHENG SENG; BLACKBURN, Travis Lee; SUM HUAN NG et al.Proceedings of SPIE - The International Society for Optical EngineeringE. 2008, Vol 6800, pp 680028.1-680028.8, issn 0277-786X, isbn 978-0-8194-6971-7 0-8194-6971-8, 1VolConference Paper