Grease-lubricated wear of aluminum bronze for jackscrew applicationBLANCHET, Thierry A; SHAFFER, Steven J; CHRISTIAEN, Anne-Claire et al.Wear. 2003, Vol 255, Num 2, pp 1238-1250, issn 0043-1648, 13 p.Conference Paper

Corrosion and tribocorrosion behaviour of thermally sprayed ceramic coatings on steelMONTICELLI, C; BALBO, A; ZUCCHI, F et al.Surface & coatings technology. 2011, Vol 205, Num 12, pp 3683-3691, issn 0257-8972, 9 p.Article

Tribological property of TiO₂ nanolubricant on piston and cylinder surfacesCHANG, H; LI, Z. Y; KAO, M. J et al.Journal of alloys and compounds. 2010, Vol 495, Num 2, pp 481-484, issn 0925-8388, 4 p.Conference Paper

Investigation of surface properties and mechanical and tribological behaviors of polyimide based composite coatingsDEMIAN, Camelia; HANLIN LIAO; LACHAT, Remy et al.Surface & coatings technology. 2013, Vol 235, pp 603-610, issn 0257-8972, 8 p.Article

Influence of high current pulsed electron beam treatment on the tribological properties of Al-Si-Pb alloyAN, J; SHEN, X. X; LU, Y et al.Surface & coatings technology. 2006, Vol 200, Num 18-19, pp 5590-5597, issn 0257-8972, 8 p.Article

CMM-based procedure for polyethylene non-congruous unicompartmental knee prosthesis wear assessmentSPINELLI, M; CARMIGNATO, S; AFFATATO, S et al.Wear. 2009, Vol 267, Num 2, pp 753-756, issn 0043-1648, 4 p.Conference Paper

Achieving very low wear rates in binary transition-metal nitrides: The case of magnetron sputtered dense and highly oriented VN coatingsFANGFANG GE; PING ZHU; FANPING MENG et al.Surface & coatings technology. 2014, Vol 248, pp 81-90, issn 0257-8972, 10 p.Article

Study on nanocrystalline Cr₂O₃ films deposited by arc ion plating: II. Mechanical and tribological propertiesWANG, Tie-Gang; JEONG, Dawoon; YANMEI LIU et al.Surface & coatings technology. 2012, Vol 206, Num 10, pp 2638-2644, issn 0257-8972, 7 p.Article

Friction and wear behaviour of acetal and nylon gearsMAO, K; LI, W; HOOKE, C. J et al.Wear. 2009, Vol 267, Num 1, pp 639-645, issn 0043-1648, 7 p.Conference Paper

Friction and wear maps of titanium alloy against a-C:H20% (DLC) filmRADI, P. A; SANTOS, L. V; BONETTI, L. F et al.Surface & coatings technology. 2008, Vol 203, Num 5-7, pp 741-744, issn 0257-8972, 4 p.Conference Paper

The effect of grit size and asperity blunting on abrasive wearTORRANCE, A. A.Wear. 2002, Vol 253, Num 7-8, pp 813-819, issn 0043-1648, 7 p.Article

Recent developments in wear-mechanism mapsLIM, S. C.Tribology international. 1998, Vol 31, Num 1-3, pp 87-97, issn 0301-679XConference Paper

Auswirkung verschiedener Nanopulver (NanoVit) im Epoxidharz auf den VerschleissSCHÄDEL, B; RÜDIGER, G; JACOBS, O et al.Tribologie und Schmierungstechnik. 2008, Vol 55, Num 3, pp 10-16, issn 0724-3472, 7 p.Article

Tribologische Kennwerte für Reibwerkstoffe = Tribology parameters for friction materialsTREPTE, St.Materialwissenschaft und Werkstofftechnik. 2002, Vol 33, Num 3, pp 142-154, issn 0933-5137Article

Strategies to control wheel profile wearFRÖHLING, Robert.Vehicle System Dynamics. 2002, Vol 37, pp 490-501, issn 0042-3114, 12 p., SUPConference Paper

A modified, filtered, pulsed cathodic vacuum arc implantation and deposition apparatus with the filtering duct working as a second anodeWANG GUANGFU; ZHANG HUIXING; ZHANG XIAOJI et al.Surface & coatings technology. 2000, Vol 128-29, pp 470-473, issn 0257-8972Conference Paper

Wear rate, frictional temperature, and energy consumption of steel 52100 with different microstructures during slidingLI, W; WANG, Y; YAN, M. F et al.Journal of materials science. 2005, Vol 40, Num 21, pp 5635-5640, issn 0022-2461, 6 p.Article

A comparison of the tribological behaviour of Y-TZP in tea and coffee under micro-abrasion conditions : SPECIAL CLUSTER ISSUE ON TRIBOCORROSION OF DENTAL MATERIALSSHARIFI, S; STACK, M. M.Journal of physics. D, Applied physics (Print). 2013, Vol 46, Num 40, issn 0022-3727, 404008.1-404008.11Article

Rapid determination of erosion rates with electron beam SNMSGOSCHNICK, J; FICHTNER, M; SCHNEIDER, T et al.Fresenius' journal of analytical chemistry. 1995, Vol 353, Num 5-8, pp 598-602, issn 0937-0633Conference Paper

Ceramic compacts as human hard tissue implants: their microstructure and wear strengthHASAN, Zahir.International journal of microstructure and materials properties (Print). 2010, Vol 5, Num 6, pp 548-560, issn 1741-8410, 13 p.Article

A numerical model for multidirectional wearJOURDAN, Franck.Wear. 2010, Vol 268, Num 11-12, pp 1380-1386, issn 0043-1648, 7 p.Article

On the Analysis of Die Wear in Wire-Drawing ProcessHADDI, Abdelkader; IMAD, Abdellatif; VEGA, Guillaume et al.Tribology transactions. 2012, Vol 55, Num 4, pp 466-472, issn 1040-2004, 7 p.Article

Effects of abrasive particle size and tool surface irregularities on wear rates of work and tool in polishing processesHUNG, Tu-Chieh; CHANG, Shao-Heng; LIN, Cheng-Chi et al.Microelectronic engineering. 2011, Vol 88, Num 9, pp 2981-2990, issn 0167-9317, 10 p.Article

Wear behavior of PAEK, poly(aryl-ether-ketone), under physiological conditions, outlooks for performing these materials in the field of hip prosthesisGERINGER, Jean; TATKIEWICZ, Witold; ROUCHOUSE, G et al.Wear. 2011, Vol 271, Num 11-12, pp 2793-2803, issn 0043-1648, 11 p.Article

The influence of abrasive body dimensions on single asperity wearWOLDMAN, M; VAN DER HEIDE, E; TINGA, T et al.Wear. 2013, Vol 301, Num 1-2, pp 76-81, issn 0043-1648, 6 p.Conference Paper