A relaxational and conductive study on two poly(ether imide)sSANCHIS, M. J; DIAZ-CALLEJA, R; JAÏMES, C et al.Polymer international. 2004, Vol 53, Num 9, pp 1368-1377, issn 0959-8103, 10 p.Article

Preparation and properties of new thermally stable poly(ether imide amide)sMEHDIPOUR-ATAEI, Shahram; AMIRSHAGHAGHI, Ahmad.Polymer international. 2004, Vol 53, Num 8, pp 1185-1190, issn 0959-8103, 6 p.Article

Influence of an organophosphonite antioxidant on the thermal behavior of PEEK/PEI blendRAMANI, R; ALAM, S.Thermochimica acta. 2012, Vol 550, pp 33-41, issn 0040-6031, 9 p.Article

Pore structure and glass transition temperature of nanoporous poly(ether imide)TONG LIU; OZISIK, Rahmi; SIEGEL, Richard W et al.Journal of polymer science. Part B. Polymer physics. 2006, Vol 44, Num 24, pp 3546-3552, issn 0887-6266, 7 p.Article

Phase separation behavior of poly(ether imide)/N, N-dimethyl acetamide/nonsolvent systemsSHEN, Li-Qiang; XU, Zhi-Kang; XU, You-Yi et al.Journal of applied polymer science. 2003, Vol 89, Num 4, pp 875-881, issn 0021-8995, 7 p.Article

Use of a poly(ether imide) coating to improve corrosion resistance and biocompatibility of magnesium (Mg) implant for orthopedic applicationsKIM, Sang-Bok; JO, Ji-Hoon; LEE, Sung-Mi et al.Journal of biomedical materials research. Part A. 2013, Vol 101, Num 6, pp 1708-1715, issn 1549-3296, 8 p.Article

Corrosion protection of magnesium alloy AZ31 by coating with poly(ether imides) (PEI)SCHARNAGI, N; BLAWERT, C; DIETZEL, W et al.Surface & coatings technology. 2009, Vol 203, Num 10-11, pp 1423-1428, issn 0257-8972, 6 p.Article

Novel organosoluble and colorless poly(ether imide)s based on 3,3-bis[4-(3,4-dicarboxyphenoxy)phenyl] phthalide dianhydride and aromatic bis(ether amine)s bearing pendent trifluoromethyl groupsYANG, Chin-Ping; SU, Yu-Yang.Journal of polymer science. Part A. Polymer chemistry. 2006, Vol 44, Num 9, pp 3140-3152, issn 0887-624X, 13 p.Article

New miscible poly(ether imide)/poly(phenyl sulfone) blendsRAMIRO, Jorge; EGUIAZABAL, José Ignacio; NAZDBAL, Jon et al.Macromolecular materials and engineering (Print). 2006, Vol 291, Num 6, pp 707-713, issn 1438-7492, 7 p.Article

Synthesis and characterization of new thermally stable poly(ether-imide)s derived from 4-aryl-2,6-bis[4-(3-nitrophthalimido)phenyl] pyridinesTAMAMI, Bahman; GHOLAM ALI KOOHMAREH.Designed monomers and polymers. 2007, Vol 10, Num 2, pp 167-180, issn 1385-772X, 14 p.Article

Reaction-induced phase separation in epoxy/polysulfone/poly(ether imide) systems. II. Generated morphologiesGIANNOTTI, M. I; MONDRAGON, I; GALANTE, M. J et al.Journal of polymer science. Part B. Polymer physics. 2004, Vol 42, Num 21, pp 3964-3975, issn 0887-6266, 12 p.Article

Highly fluorinated poly(ether-imide)s derived from 2,2'-bis(3,4,5-trifluorophenyl)-4,4'-diaminodiphenyl ether and aromatic dianhydridesBEHNIAFAR, Hossein; SADEGHI-ABENDANSARI, Hamid.Polymer international. 2012, Vol 61, Num 2, pp 286-293, issn 0959-8103, 8 p.Article

Synthesis and characterization of hyperbranched polyimides with good organosolubility and thermal properties based on a new triamine and conventional dianhydridesHUAN CHEN; JIE YIN.Journal of polymer science. Part A. Polymer chemistry. 2002, Vol 40, Num 21, pp 3804-3814, issn 0887-624XArticle

Naphthalene dianhydride based semifluorinated sulfonated copoly(ether imide)s: Synthesis, characterization and proton exchange propertiesMISTRI, Ershad Ali; MOHANTY, Aruna Kumar; BANERJEE, Susanta et al.Journal of membrane science (Print). 2013, Vol 441, pp 168-177, issn 0376-7388, 10 p.Article

Poly(ether imide)s derived from phthalazinone-containing dianhydridesJIN YAN WANG; GONG XIONG LIAO; CHENG LIU et al.Journal of polymer science. Part A. Polymer chemistry. 2004, Vol 42, Num 23, pp 6089-6097, issn 0887-624X, 9 p.Article

Synthesis and characterization of soluble polyimides derived from 2', 5'-bis(3,4-dicarboxyphenoxy)-p-terphenyl dianhydrideHSIAO, Sheng-Huei; CHUNG, Cheng-Lin; LEE, Mei-Ling et al.Journal of polymer science. Part A. Polymer chemistry. 2004, Vol 42, Num 4, pp 1008-1017, issn 0887-624X, 10 p.Article

The influence of multiple Ortho-substituted phenylenes on the nature of poly(ether imide)sEASTMOND, G. C; PAPROTNY, J.Polymer (Guildford). 2004, Vol 45, Num 4, pp 1073-1078, issn 0032-3861, 6 p.Article

Synthesis and properties of phthalonitrile-terminated oligomeric poly(ether imide)s containing phthalazinone moietyCHENG LIU; JINYAN WANG; ENCHENG LIN et al.Polymer degradation and stability. 2012, Vol 97, Num 3, pp 460-468, issn 0141-3910, 9 p.Article

Fluorinated high-performance polymers: Poly(arylene ether)s and aromatic polyimides containing trifluoromethyl groupsDHARA, Mahua G; BANERJEE, Susanta.Progress in polymer science. 2010, Vol 35, Num 8, pp 1022-1077, issn 0079-6700, 56 p.Article

Organosoluble Poly(ether imide)s from Phthalimidine Based and Trifluoromethyl Substituted Bis(ether amine)SUMAN KUMAR SEN; MAJI, Samarendra; DASGUPTA, Barnali et al.Journal of applied polymer science (Print). 2009, Vol 113, Num 3, pp 1550-1559, issn 0021-8995, 10 p.Article

Synthesis and Characterization of Highly Soluble Poly(ether imide)s Containing Indane Moieties in the Main ChainDASGUPTA, Barnali; SUMAN KUMAR SEN; MAJI, Samarendra et al.Journal of applied polymer science (Print). 2009, Vol 112, Num 6, pp 3640-3651, issn 0021-8995, 12 p.Article

Processability, Structure and Mechanical Properties of Poly(ether imide)/Amorphous Copolyester BlendsGRANADO, Ainhoa; EGUIAZABAL, José Iqnacio; NAZABAL, Jon et al.Macromolecular materials and engineering (Print). 2010, Vol 295, Num 5, pp 476-483, issn 1438-7492, 8 p.Article

Organosoluble and colorless fluorinated poly (ether imide)s from 1,2-bis(3,4-dicarboxyphenoxy) benzene dianhydride and trifluoromethyl-substituted aromatic bis(ether amine)sCHUNG, Cheng-Lin; YANG, Chin-Ping; HSIAO, Sheng-Huei et al.Journal of polymer science. Part A. Polymer chemistry. 2006, Vol 44, Num 9, pp 3092-3102, issn 0887-624X, 11 p.Article

Morphology profiles obtained by reaction-induced phase separation in epoxy/polysulfone/poly(ether imide) systemsGIANNOTTI, M. I; MONDRAGON, I; GALANTE, M. J et al.Polymer international. 2005, Vol 54, Num 6, pp 897-903, issn 0959-8103, 7 p.Article

Influence of Poly(ether imide) on the Free Volume Hole Size and Distributions in Poly(ether ether ketone)RAMANI, R; ALAM, S.Journal of applied polymer science. 2012, Vol 125, Num 4, pp 3200-3210, issn 0021-8995, 11 p.Article