A soft photo-mask with embedded carbon black and its application in contact photolithographyHSIEH, Yi-Ta; HENG HSIEH; LEE, Yung-Chun et al.Journal of micromechanics and microengineering (Print). 2014, Vol 24, Num 8, issn 0960-1317, 085006.1-085006.5Article

Chemical mechanical planarization (CMP) of on-axis Si-face SiC wafer using catalyst nanoparticles in slurryYAN ZHOU; GUOSHUN PAN; XIAOLEI SHI et al.Surface & coatings technology. 2014, Vol 251, pp 48-55, issn 0257-8972, 8 p.Article

Dispersion of multi-walled carbon nanotube in tetrahydrofuran functionalized with Ar/O₂, Ar/N₂, and Ar/N₂/H₂ plasmaOGAWA, Daisuke; KATO, Masaki; MORI, Junki et al.Surface & coatings technology. 2014, Vol 258, pp 605-607, issn 0257-8972, 3 p.Article

EMI shielding behaviors of Ni-coated MWCNTs-filled epoxy matrix nanocompositesKIM, Byung-Joo; BAE, Kyong-Min; YOUNG SIL LEE et al.Surface & coatings technology. 2014, Vol 242, pp 125-131, issn 0257-8972, 7 p.Article

Effect of ethanol on the fabrication of porous anodic alumina in sulfuric acidXIUFANG QIN; JINQIONG ZHANG; XIAOJUAN MENG et al.Surface & coatings technology. 2014, Vol 254, pp 398-401, issn 0257-8972, 4 p.Article

Energy gradient carbon embedding in the magnetic media for improved tribological performanceABDUL SAMAD, M; RISMANI, E; KWEK, W. M et al.Surface & coatings technology. 2014, Vol 242, pp 152-156, issn 0257-8972, 5 p.Article

Influence of deposition pressure and selenisation on damp heat degradation of the Cu(In,Ga)Se₂ back contact molybdenumTHEELEN, Mirjam; POLMAN, Krista; TOMASSINI, Mathieu et al.Surface & coatings technology. 2014, Vol 252, pp 157-167, issn 0257-8972, 11 p.Article

Influence of thermal oxidation temperature on the microstructural and tribological behavior of Ti6Al4V alloySONG WANG; ZHENHUA LIAO; YUHONG LIU et al.Surface & coatings technology. 2014, Vol 240, pp 470-477, issn 0257-8972, 8 p.Article

Interface melding in cold spray titanium particle impactKING, Peter C; BUSCH, Christian; KITTEL-SHERRI, Teresa et al.Surface & coatings technology. 2014, Vol 239, pp 191-199, issn 0257-8972, 9 p.Article

Metal surface layers after pulsed electron beam treatmentFETZER, Renate; MUELLER, Georg; AN, Wladimir et al.Surface & coatings technology. 2014, Vol 258, pp 549-556, issn 0257-8972, 8 p.Article

Modeling ablative behavior and thermal response of carbon/carbon compositesTIANTIAN YIN; ZHONGWEI ZHANG; XIAOFENG LI et al.Computational materials science. 2014, Vol 95, pp 35-40, issn 0927-0256, 6 p.Article

N2/H₂ plasma surface modifications of polystyrene inhibit the adhesion of multidrug resistant bacteriaTRENTIN, Danielle S; BONATTO, Fernando; ZIMMER, Karine R et al.Surface & coatings technology. 2014, Vol 245, pp 84-91, issn 0257-8972, 8 p.Article

On the comparison of changes induced in crystallinity and surface nanomechanical properties of ultra high molecular weight polyethylene by γ and swift heavy ion irradiationsLAGARDE, Mayra; DE PAZ, Ariel; DEL GROSSO, Mariela F et al.Surface & coatings technology. 2014, Vol 258, pp 293-299, issn 0257-8972, 7 p.Article

Preparation and characterization of anticorrosive layers deposited by micro-arc oxidation on low carbon steelMALINOVSCHI, V; MARIN, A; MOGA, S et al.Surface & coatings technology. 2014, Vol 253, pp 194-198, issn 0257-8972, 5 p.Article

Stress evolution in a Pt-diffused γ/γ' bond coat after oxidationZHAO, X; CERNIK, B; TANG, C. C et al.Surface & coatings technology. 2014, Vol 247, pp 48-54, issn 0257-8972, 7 p.Article

Study of SiN_x films used as protective layer on Ni film flow sensorsJUN XU; TIANMIN SHAO; RONG ZHU et al.Surface & coatings technology. 2014, Vol 253, pp 38-43, issn 0257-8972, 6 p.Article

The effect of substrate geometry and surface orientation on the film structure of DLC deposited using PECVDNELSON, N; RAKOWSKI, R. T; FRANKS, J et al.Surface & coatings technology. 2014, Vol 254, pp 73-78, issn 0257-8972, 6 p.Article

Using bagasse ash as a silica source when preparing silica aerogels via ambient pressure dryingNAZRIATI, N; SETYAWAN, Heru; AFFANDI, Samsudin et al.Journal of non-crystalline solids. 2014, Vol 400, pp 6-11, issn 0022-3093, 6 p.Article

Thermal stability and oxidation resistance of BiCuSeO based thermoelectric ceramicsFU LI; WEI, Tian-Ran; FEIYU KANG et al.Journal of alloys and compounds. 2014, Vol 614, pp 394-400, issn 0925-8388, 7 p.Article

Design and optimisation of process parameters in an in-line CIGS evaporation pilot systemZHENGFEI WEI; PRABHAKARA RAO BOBBILI; SENTHILARASU, S et al.Surface & coatings technology. 2014, Vol 241, pp 159-167, issn 0257-8972, 9 p.Conference Paper

MFM imaging of expanded austenite formed on 304 SS and CoCrMo alloysÖZTÜRK, O; FIDAN, M; MÄNDL, S et al.Surface & coatings technology. 2014, Vol 256, pp 15-22, issn 0257-8972, 8 p.Conference Paper

A study on washing resistance of pp-HMDSO films deposited on wool fabrics for anti-pilling purposesMONTARSOLO, A; MOSSOTTI, R; INNOCENTI, R et al.Surface & coatings technology. 2013, Vol 224, pp 109-113, issn 0257-8972, 5 p.Article

Density improvement of silicon nanocrystals embedded in silicon carbide matrix deposited by hot-wire CVDKAIFENG BI; YANHONG LIU; KUN LIU et al.Surface & coatings technology. 2013, Vol 228, pp 148-153, issn 0257-8972, 6 p.Article

Direct writing via electron-driven reactionsSEUNG WHAN LEE; MOHAN SANKARAN, R.Materials today (Kidlington). 2013, Vol 16, Num 4, pp 117-122, issn 1369-7021, 6 p.Article

Effect of VHF excitation frequency on localized deposition of silicon in non-equilibrium-plasma-enhanced CVD by an under-expanded supersonic jetKURIBAYASHI, Shizuma; TSUNEKAWA, Yoshihiro; AKAHORI, Shoji et al.Surface & coatings technology. 2013, Vol 225, pp 75-78, issn 0257-8972, 4 p.Article