High-density nanoparticle ceramic bodies: A study of heating rates in the sinterization of Gadolinium-doped CeriaGODINHO, Mario J; RIBEIRO, Caue; GONCALVES, Rosana F et al.Journal of thermal analysis and calorimetry. 2013, Vol 111, Num 2, pp 1351-1355, issn 1388-6150, 5 p.Article

Method of preparation and thermodynamic properties of transparent Y₃Al₅O₁₂ nanoceramicsKE LIU; HE, Duan-Wei; ZHOU, Xiao-Lin et al.Journal of thermal analysis and calorimetry. 2013, Vol 111, Num 1, pp 289-294, issn 1388-6150, 6 p.Article

Thermal analyses applied to ceramic nanopowders: from synthesis to sintering: A review on transition alumina powder-based materials : Current Topics of AICAT 2012MONTANARO, Laura; PALMERO, Paola; LOMBARDI, Mariangela et al.Journal of thermal analysis and calorimetry. 2013, Vol 112, Num 1, pp 437-445, issn 1388-6150, 9 p.Conference Paper

Coatings on Glass—Ceramic Granules for Dental Restorative BiomaterialsMICHEL, Kathrin; PANTANO, Carlo G; RITZBERGER, Christian et al.International journal of applied glass science (Print). 2011, Vol 2, Num 1, pp 30-38, issn 2041-1286, 9 p.Article

Manufacturing of Net-Shape Reaction-Bonded Ceramic Microparts by Low-Pressure Injection MoldingSCHLECHTRIEMEN, Nadja; BINDER, Joachim R; HANE, Christina et al.Advanced engineering materials (Print). 2009, Vol 11, Num 5, pp 339-345, issn 1438-1656, 7 p.Article

A Novel Method of Predicting Ultrasonic and Elastic Properties of Isotropic Ceramic Materials after Sintering from the Properties of Partially Sintered or Green CompactsKALYAN KUMAR PHANI.Journal of the American Ceramic Society. 2008, Vol 91, Num 1, pp 215-222, issn 0002-7820, 8 p.Article

Current Isolation in Spark Plasma Sintering of Conductive and Nonconductive CeramicsCARNEY, Carmen M; MAH, Tai-Il.Journal of the American Ceramic Society. 2008, Vol 91, Num 10, pp 3448-3450, issn 0002-7820, 3 p.Article

Dip-coating of Fibrous Natural Materials for Alumina Tube ManufacturingGAYDARDZHIEV, Stoyan; WILKERAND, Viola; SCHEFFLER, Michael et al.Advanced engineering materials (Print). 2008, Vol 10, Num 3, issn 1438-1656, 151, 223-226 [5 p.]Article

Microstmcture and non-isothermal oxidation mechanism of biomorphic carbon templatePENGZHAO GAO; YONGMEI BAI; SEN LIN et al.Ceramics international. 2008, Vol 34, Num 8, pp 1975-1981, issn 0272-8842, 7 p.Article

Processing and properties of ultra-high temperature ceramics for space applicationsMONTEVERDE, F; BELLOSI, A; SCATTEIA, Luigi et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2008, Vol 485, Num 1-2, pp 415-421, issn 0921-5093, 7 p.Article

Stereo fabric modeling technology in ceramics manufactureKITA, Hideki; HYUGA, Hideki; KONDO, Naoki et al.Journal of the European Ceramic Society. 2008, Vol 28, Num 5, pp 1079-1083, issn 0955-2219, 5 p.Conference Paper

Application of hertzian tests to measure stress-strain characteristics of ceramics at elevated temperaturesSANCHEZ-GONZALEZ, Estibaliz; MELENDEZ-MARTINEZ, Juan J; PAJARES, Antonia et al.Journal of the American Ceramic Society. 2007, Vol 90, Num 1, pp 149-153, issn 0002-7820, 5 p.Article

Charging behavior at the alumina-water interface and implications for ceramic processingFRANKS, George V; YANG GAN.Journal of the American Ceramic Society. 2007, Vol 90, Num 11, pp 3373-3388, issn 0002-7820, 16 p.Article

Comparison of fracture resistance as measured by the indentation fracture method and fracture toughness determined by the single-edge-precracked beam technique using silicon nitrides with different microstructuresMIYAZAKI, Hiroyuki; HYUGA, Hideki; HIRAO, Kiyoshi et al.Journal of the European Ceramic Society. 2007, Vol 27, Num 6, pp 2347-2354, issn 0955-2219, 8 p.Article

Fabrication of net-shape functionally graded composites by electrophoretic deposition and sintering : Modeling and experimentationOLEVSKY, E. A; WANG, X; MAXIMENKO, A et al.Journal of the American Ceramic Society. 2007, Vol 90, Num 10, pp 3047-3056, issn 0002-7820, 10 p.Article

Optimal shape of thin tensile test specimenKLEMENSØ, Trine; LUND, Erik; SORENSEN, Bent F et al.Journal of the American Ceramic Society. 2007, Vol 90, Num 6, pp 1827-1835, issn 0002-7820, 9 p.Article

Phase transformation in cordierite gel synthesized by non-hydrolytic sol-gel routeJANKOVIC-CASTVAN, I; LAZAREVIC, S; TANASKOVIC, D et al.Ceramics international. 2007, Vol 33, Num 7, pp 1263-1268, issn 0272-8842, 6 p.Article

Using confocal scanning laser microscopy for the in situ study of high-temperature behaviour of complex ceramic materialsJONES, Peter Tom; DESMET, David; MUXING GUO et al.Journal of the European Ceramic Society. 2007, Vol 27, Num 12, pp 3497-3507, issn 0955-2219, 11 p.Article

Laser micro sintering of ceramic materials, part 1REGENFUSS, P; STREEK, A; ULLMANN, F et al.Interceram. 2007, Vol 56, Num 6, pp 420-422, issn 0020-5214, 3 p.Article

A four-point bend technique to determine dynamic fracture toughness of ceramicsWEERASOORIYA, Tusit; MOY, Paul; CASEM, Daniel et al.Journal of the American Ceramic Society. 2006, Vol 89, Num 3, pp 990-995, issn 0002-7820, 6 p.Article

Analytical solution for a transient, three-dimensional temperature distribution due to a moving laser beamARAYA, Guillermo; GUTIERREZ, Gustavo.International journal of heat and mass transfer. 2006, Vol 49, Num 21-22, pp 4124-4131, issn 0017-9310, 8 p.Article

Dispersing multi-component and unstable powders in aqueous media using comb-type anionic polymersLAARZ, Eric; KAUPPI, Annika; ANDERSSON, Karin M et al.Journal of the American Ceramic Society. 2006, Vol 89, Num 6, pp 1847-1852, issn 0002-7820, 6 p.Article

Fabrication of highly microstructure controlled ceramics by novel colloidal processingSAKKA, Yoshio.Nippon seramikkusu kyokai gakujutsu ronbunshi. 2006, Vol 114, Num 5, pp 371-376, issn 0914-5400, 6 p.Article

Improving the thermal and energetic efficiency of a gas heated kiln for firing technical ceramicsZASHKOVA, L; PENKOVA, N; ASENOV, A et al.Interceram. 2006, Vol 55, Num 2, pp 86-88, issn 0020-5214, 3 p.Article

Particle shape and suspension rheology of short-fiber systemsPABST, Willi; GREGOROVA, Eva; BERTHOLD, Christoph et al.Journal of the European Ceramic Society. 2006, Vol 26, Num 1-2, pp 149-160, issn 0955-2219, 12 p.Article