Anionic Bulk Polymerization to Synthesize Styrene-Isoprene Diblock and Multiblock Copolymers by Reactive ExtrusionXIEYAO YUAN; YONG GUAN; SHUZHAO LI et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 2, issn 0021-8995, 39429.1-39429.9Article

Improved Interfacial Surface Generator for the Co-extrusion of Micro- and Nanolayered PolymersHARRIS, Patrick J; PATZ, Jessica; HUNTINGTON, Benjamin A et al.Polymer engineering and science. 2014, Vol 54, Num 3, pp 636-645, issn 0032-3888, 10 p.Article

Preparation and Characterization of High-Strength Poly(ether ether ketone) FilmsWENLEI LI; GUIBIN WANG; ZHENHUA JIANG et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 9, issn 0021-8995, 40172.1-40172.6Article

The Crystallization Morphology Evolution of Polyoxymethylene/ Poly(ethylene oxide) Blend Micropart Prepared under Microinjection Molding ConditionsCHANGBIN TAN; SHIBING BAI; QI WANG et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 15, issn 0021-8995, 40538.1-40538.12Article

Thermal, Mechanical, and Morphological Characterization of Biobased Thermoplastic Starch From Agricultural Waste/Polypropylene BlendsMING MENG PANG; MENG YAN PUN; ISHAK, Zainal Arifin Mohd et al.Polymer engineering and science. 2014, Vol 54, Num 6, pp 1357-1365, issn 0032-3888, 9 p.Article

Validation of the modified rule of mixtures using a combination of fibre orientation and fibre length measurementsHINE, Peter; PARVEEN, Bushra; BRANDS, Dave et al.Composites. Part A, Applied science and manufacturing. 2014, Vol 64, pp 70-78, issn 1359-835X, 9 p.Article

Viscoelastic Properties and Extrusion Processability of Poly(vinyl butyral)ARAYACHUKIAT, Sunatda; SIRIPRUMPOONTHUM, Monchai; NOBUKAWA, Shogo et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 11, issn 0021-8995, 40337.1-40337.7Article

The Effect of Graft Copolymers of Maleic Anhydride and Epoxy Resin on the Mechanical Properties and Morphology of PP/ABS BlendsZHU LUO; QIUYI LU; FENGHE MA et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 20, issn 0021-8995, 40898.1-40898.9Article

Thermo-mechanical properties of β-nucleated polypropylene multilayersKÖPPLMAYR, Thomas; MAYRHOFER, Elias; UNTERWEGER, Christoph et al.Polymer testing. 2014, Vol 39, pp 79-85, issn 0142-9418, 7 p.Article

Physicochemical properties of PLA lignin blendsGORDOBIL, Oihana; EGÜES, Itziar; LLANO-PONTE, Rodrigo et al.Polymer degradation and stability. 2014, Vol 108, pp 330-338, issn 0141-3910, 9 p.Conference Paper

Use of maleic anhydride compatibilization to improve toughness and other properties of polylactide blended with thermoplastic elastomersKAYNAK, Cevdet; MEYVA, Yelda.Polymers for advanced technologies. 2014, Vol 25, Num 12, pp 1622-1632, issn 1042-7147, 11 p.Conference Paper

Dynamic optimization of the vulcanization of EPDM elastomers by short waves infrared technologiesLE BIDEAU, Pascal; GLOUANNEC, Patrick; PLOTEAU, Jean-Pierre et al.Computers & chemical engineering. 2013, Vol 55, pp 126-133, issn 0098-1354, 8 p.Article

Structure Memory Effects and Rheological Behaviors of Polyethylenes in Processing Temperature WindowGAI, Jing-Gang; YA CAO.Journal of applied polymer science. 2013, Vol 129, Num 1, pp 354-361, issn 0021-8995, 8 p.Article

Synthesis of Polyolefin-g-Poly(ethylene oxide) by Reacting Maleic Anhydride Modified Polypropylene or Poly(propylene-co-ethylene) with Hydroxy-terminated Poly(ethylene Oxide) in the MeltÖZEN, Ilhan; DIRNBERGER, Klaus; RUSTAL, Claude et al.Polymer-plastics technology and engineering (Softcover ed). 2013, Vol 52, Num 1-3, pp 101-106, issn 0360-2559, 6 p.Article

Thermal, Crystalline, and Tribological Properties of PEEK/PEI/PES Plastics AlloysJIANBING CHEN; QIANG GUO; ZHENGPING ZHAO et al.Journal of applied polymer science. 2013, Vol 127, Num 3, pp 2220-2226, issn 0021-8995, 7 p.Article

A Reactive Extrusion Process for the Free Radical Grafting of Silanes Onto Polypropylene: Effects of Processing Conditions and Properties of Water Cross-Linked Silane-Grafted PolypropyleneLI, Zheng-Hui; HU, Guo-Hua; CORRIOU, Jean-Pierre et al.Polymer engineering and science. 2013, Vol 53, Num 7, pp 1571-1581, issn 0032-3888, 11 p.Article

Influence of process parameters on microstructure and mechanical properties of starch-cellulose acetate/silver sulfadiazine matrices prepared by melt extrusionMODOLON ZEPON, Karine; VIEIRA, Luiz Fernando; SOLDI, Valdir et al.Polymer testing. 2013, Vol 32, Num 6, pp 1123-1127, issn 0142-9418, 5 p.Article

Mechanical Properties and Crystallization Behavior of High Fluidity Polypropylene/Metallocene Poly(ethylene-butene-hexene) Copolymer BlendsYINGYING TANG; JINGYI WANG; HONGBING JIA et al.Journal of applied polymer science (Print). 2013, Vol 130, Num 4, pp 2557-2562, issn 0021-8995, 6 p.Article

Multifractal Analysis on Dispersion of Immiscible High-Density Polyethylene/Polystyrene Blends Processed via Polymer Vane Plasticating ExtruderWU, Zheng-Huan; ZHAO, Yong-Qing; ZHANG, Gui-Zhen et al.Journal of applied polymer science (Print). 2013, Vol 130, Num 4, pp 2328-2335, issn 0021-8995, 8 p.Article

Preparation of POE Graft Copolymer and Its Application of Toughening Modification for PA6XIJUN LIU; XIAOHUA GU; BAOQING HOU et al.Polymer-plastics technology and engineering (Softcover ed). 2013, Vol 52, Num 4-6, pp 344-351, issn 0360-2559, 8 p.Article

Tough Polyamide 6/Core―Shell Blends Prepared via In Situ Anionic Polymerization of ε-Caprolactam by Reactive ExtrusionDONGGUANG YAN; GUANG LI; MINGYUE HUANG et al.Polymer engineering and science. 2013, Vol 53, Num 12, pp 2705-2710, issn 0032-3888, 6 p.Article

Using Synchrotron FTIR Spectroscopy to Determine Secondary Structure Changes and Distribution in Thermoplastic ProteinBIER, James Michael; CASPARUS JOHANNES REINHARD VERBEEK; LAY, Mark Christopher et al.Journal of applied polymer science (Print). 2013, Vol 130, Num 1, pp 359-369, issn 0021-8995, 11 p.Article

Entrance Length of Polymer Flow Through a Contraction Die: Comparison of Calculation from an Equation and Flow Induced Birefringence MeasurementsJICHANG FAN; XIANGFANG PENG.Journal of macromolecular science. Physics. 2012, Vol 51, Num 4-6, pp 946-955, issn 0022-2348, 10 p.Article

Process validation of the normalized rheological function behavior during polymer crystallizationLAMBERTI, Gaetano.Rheologica acta. 2012, Vol 51, Num 3, pp 259-265, issn 0035-4511, 7 p.Article

Viscoelastic behaviour and flow instabilities of biodegradable poly (ε-caprolactone) polyestersNOROOZI, Nazbanoo; THOMSON, Jaclyn A; NOROOZI, Nader et al.Rheologica acta. 2012, Vol 51, Num 2, pp 179-192, issn 0035-4511, 14 p.Article