Influence of Alumina Content and Thermal Treatment on the Thermal Conductivity of UPE/Al₂O₃ CompositeXINFENG WU; PINGKAI JIANG; YUN ZHOU et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 15, issn 0021-8995, 40528.1-40528.11Article

Experimental Investigation of the Effect of Residual Stresses on Rapid Crack Propagation in Polyethylene (PE100) PipesGUEVARA-MORALES, Andrea; LEEVERS, Patrick.Polymer engineering and science. 2013, Vol 53, Num 6, pp 1217-1222, issn 0032-3888, 6 p.Article

Studies on the biocompatibility of bacterial celluloseANDRADE, Fábia K; ALEXANDRE, Nuno; AMORIM, Irina et al.Journal of bioactive and compatible polymers. 2013, Vol 28, Num 1, pp 97-112, issn 0883-9115, 16 p.Article

Control over crystalline form in polypropylene pipe via mandrel rotation extrusionRUI HAN; MIN NIE; SHIBING BAI et al.Polymer bulletin (Berlin. Print). 2013, Vol 70, Num 7, pp 2083-2096, issn 0170-0839, 14 p.Article

Response of pultruded composite tubes subjected to dynamic and impulsive axial loadingKAKOGIANNIS, D; CHUNG KIM YUEN, S; PALANIVELU, S et al.Composites. Part B, Engineering. 2013, Vol 55, pp 537-547, issn 1359-8368, 11 p.Article

Analysis and Prediction of Remaining Life Time of Damaged Polyethylene Gas PipesRAOS, P; TONKOVIC, Z; SERCER-ZARGEB, M et al.KGK. Kautschuk, Gummi, Kunststoffe. 2011, Vol 64, Num 6, pp 33-39, issn 0948-3276, 7 p.Article

Degradation of fatigue resistance of filament wound glass fibre reinforced/vinyl ester pipes exposed to aqueous environmentsKHAN, Z.Plastics, rubber and composites. 2011, Vol 40, Num 8, pp 397-401, issn 1465-8011, 5 p.Article

Monitoring the influence of different weathering conditions on polyethylene pipes by IR-microscopyMARIA, Raquel; RODE, Karsten; BRÜLL, Robert et al.Polymer degradation and stability. 2011, Vol 96, Num 10, pp 1901-1910, issn 0141-3910, 10 p.Article

Analysing fluctuation of material properties of non-circular profile filament wound composite pipes along perimeter of cross-sectionCZEL, G; CZIGANY, T.Plastics, rubber and composites. 2011, Vol 40, Num 6-7, pp 369-373, issn 1465-8011, 5 p.Article

Comparative study of the quasi-static energy absorption of small-scale composite tubes with different geometrical shapes for use in sacrificial cladding structuresPALANIVELU, S; VAN PAEPEGEM, W; DEGRIECK, J et al.Polymer testing. 2010, Vol 29, Num 3, pp 381-396, issn 0142-9418, 16 p.Article

Control system design and analysis of FRP pipe thread-grinding machineJIAZHONG XU; MING QIAO; XINYING WANG et al.International journal of computer applications in technology. 2010, Vol 39, Num 4, pp 177-186, issn 0952-8091, 10 p.Article

High-density polyethylene pipe with high resistance to slow crack growth prepared via rotation extrusionMIN NIE; SHIBING BAI; QI WANG et al.Polymer bulletin (Berlin. Print). 2010, Vol 65, Num 6, pp 609-621, issn 0170-0839, 13 p.Article

Burst failure load of composite pressure vesselsONDER, Aziz; SAYMAN, Onur; DOGAN, Tolga et al.Composite structures. 2009, Vol 89, Num 1, pp 159-166, issn 0263-8223, 8 p.Article

Experimental and theoretical investigation of stress corrosion crack (SCC) growth of polyethylene pipesCHOI, Byoung-Ho; CHUDNOVSKY, Alexander; PARADKAR, Rajesh et al.Polymer degradation and stability. 2009, Vol 94, Num 5, pp 859-867, issn 0141-3910, 9 p.Article

Effect of Quartz Sand Filler on Mechanical Properties of Fiberglass Pressure PipesDINIZ MELO, José Daniel; DE ARAUJO BARROS, Gustavo.Journal of advanced materials. 2009, Vol 41, Num 4, pp 28-39, issn 1070-9789, 12 p.Article

Prediction of the remaining lifetime of polyethylene pipes after up to 30 years in useFRANK, A; PINTER, G; LANG, R. W et al.Polymer testing. 2009, Vol 28, Num 7, pp 737-745, issn 0142-9418, 9 p.Article

Surface Roughness Parameters Evaluation in Machining GFRP Composites by PCD Tool using Digital Image ProcessingSARMA, P. M. M. S; KARUNAMOORTHY, L; PALANIKUMAR, K et al.Journal of reinforced plastics and composites. 2009, Vol 28, Num 13, pp 1567-1585, issn 0731-6844, 19 p.Article

Experiences with modified test conditions for notch pipe testingKRATOCHVILLA, Thomas R. U; MUSCHIK, Heinz; DRAGAUN, Heinz et al.Polymer testing. 2008, Vol 27, Num 2, pp 158-160, issn 0142-9418, 3 p.Article

Fracture Prediction in Tough Polyethylene Pipes Using Measured Craze StrengthDAVIS, P; BURN, S; GOULD, S et al.Polymer engineering and science. 2008, Vol 48, Num 5, pp 843-852, issn 0032-3888, 10 p.Article

Lifetime prediction of a blue PE100 water pipeHOANG, Eric M; LOWE, David.Polymer degradation and stability. 2008, Vol 93, Num 8, pp 1496-1503, issn 0141-3910, 8 p.Article

Complex yield behavior of polyethylene on oblique angle grooved tensile specimenCHOI, Sunwoong; YEONG SUNG SUH; SEO, Youngho et al.Polymer testing. 2007, Vol 26, Num 7, pp 834-838, issn 0142-9418, 5 p.Article

Experimental analysis of interfacial pressures in crimped joint assembliesCHOI, Sunwoong; YEONG SUNG SUH; PYO, Sooho et al.Polymer testing. 2007, Vol 26, Num 6, pp 742-750, issn 0142-9418, 9 p.Article

Fatigue behavior of filament-wound glass fiber reinforced epoxy composite tubes under tension/torsion biaxial loadingDONGTAO QI; GUANGXU CHENG.Polymer composites. 2007, Vol 28, Num 1, pp 116-123, issn 0272-8397, 8 p.Article

Analysis of fracture behaviour of multilayer pipesNEZBEDOVA, E; KNESL, Z; VLACH, B et al.Plastics, rubber and composites. 2007, Vol 36, Num 5, pp 207-212, issn 1465-8011, 6 p.Conference Paper

Rapid crack propagation in loosely fitted PE liner pipeLEEVERS, P; HENDERSON, A; PEREIRA, R et al.Plastics, rubber and composites. 2007, Vol 36, Num 5, pp 180-183, issn 1465-8011, 4 p.Conference Paper