A multiscale damage and crack opening model for the prediction of flow path in laminated compositeBOIS, Christophe; MALENFANT, Jean-Charles; WAHL, Jean-Christophe et al.Composites science and technology. 2014, Vol 97, pp 81-89, issn 0266-3538, 9 p.Article

A simple method for modeling the concentration-dependent water sorption in reinforced polymeric materialsJOANNES, S; MAZE, L; BUNSELL, A. R et al.Composites. Part B, Engineering. 2014, Vol 57, pp 219-227, issn 1359-8368, 9 p.Article

Acoustic emission characterization of the temperature effect on falling weight impact damage in carbon/epoxy laminatesBOOMINATHAN, R; ARUMUGAM, V; SANTULLI, C et al.Composites. Part B, Engineering. 2014, Vol 56, pp 591-598, issn 1359-8368, 8 p.Article

Amino-Functionalization of Carbon Fibers Through Electron-Beam Irradiation TechniqueLIAN MAO; YUANSHENG WANG; ZHENJUAN ZANG et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 10, issn 0021-8995, 40274.1-40274.8Article

An efficient approach to determine compression after impact strength of quasi-isotropic composite laminatesESRAIL, Fardin; KASSAPOGLOU, Christos.Composites science and technology. 2014, Vol 98, pp 28-35, issn 0266-3538, 8 p.Article

Bridging effect on mode I fatigue delamination behavior in composite laminatesLIAOJUN YAO; ALDERLIESTEN, René; MEIYING ZHAO et al.Composites. Part A, Applied science and manufacturing. 2014, Vol 63, pp 103-109, issn 1359-835X, 7 p.Article

Circular braiding take-up speed generation using inverse kinematicsVAN RAVENHORST, J. H; AKKERMAN, R.Composites. Part A, Applied science and manufacturing. 2014, Vol 64, pp 147-158, issn 1359-835X, 12 p.Article

Crystallization and Mechanical Properties of Isotactic Polypropylene/Calcium Carbonate Nanocomposites with a Stratified Distribution of Calcium CarbonateMING WANG; LU LIN; QICAI PENG et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 10, issn 0021-8995, 39632.1-39632.9Article

Damage characterization of surface and sub-surface defects in stitch-bonded biaxial carbon/epoxy compositesMASOUD YEKANI FARD; SEID MOHAMMADALI SADAT; RAJI, Brian B et al.Composites. Part B, Engineering. 2014, Vol 56, pp 821-829, issn 1359-8368, 9 p.Article

Damage tolerance in glass reinforced polymer laminatesCAMPBELL, Kenny W; MOTT, Peter H.Composites science and technology. 2014, Vol 95, pp 21-28, issn 0266-3538, 8 p.Article

Effect of Chemical Surface Modifications on the Properties of Alfa Fiber-Polyester CompositesBENYAHIA, Azzedine; MERROUCHE, Abdellah.Polymer-plastics technology and engineering (Softcover ed). 2014, Vol 53, Num 4-7, pp 403-410, issn 0360-2559, 8 p.Article

Effect of Processing Conditions on Physical Properties of 3-Aminophenoxyphthalonitrile/Epoxy LaminatesHENG GUO; ZHIRAN CHEN; XIAOBO LIU et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 1, issn 0021-8995, 39746.1-39746.11Article

Effect of high through-thickness compressive stress on fibre direction tensile strength of carbon/epoxy composite laminatesKHONG WUI GAN; WISNOM, Michael R; HALLETT, Stephen R et al.Composites science and technology. 2014, Vol 90, pp 1-8, issn 0266-3538, 8 p.Article

Effect of nanoclays on the mechanical properties and durability of novolac phenolic resin/woven glass fiber composite at various chemical environmentsEESAEE, Mostafa; SHOJAEI, Akbar.Composites. Part A, Applied science and manufacturing. 2014, Vol 63, pp 149-158, issn 1359-835X, 10 p.Article

Effect of relative ply orientation on the through-thickness permeability of unidirectional fabricsSAS, Hatice S; WURTZEL, Eric B; SIMACEK, Pavel et al.Composites science and technology. 2014, Vol 96, pp 116-121, issn 0266-3538, 6 p.Article

Effects of local damage on vibration characteristics of composite pyramidal truss core sandwich structureJIA LOU; LINZHI WU; LI MA et al.Composites. Part B, Engineering. 2014, Vol 62, pp 73-87, issn 1359-8368, 15 p.Article

Electromagnetic transmission characteristics of composite frequency selective surfaces coated with conductive polymer-silver pasteCHANGLIANG LI; DAZHI JIANG; JINGCHENG ZENG et al.Composites science and technology. 2014, Vol 90, pp 32-39, issn 0266-3538, 8 p.Article

Energy Filtered Low Voltage In Lens Detector SEM and XPS of Natural Fiber SurfacesRASCH, Ron; STRICHER, Arthur; TRUSS, Rowan W et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 9, issn 0021-8995, 39572.1-39572.7Article

Environmental effects on the mechanical behaviour of pultruded jute/glass fibre-reinforced polyester hybrid compositesAKIL, Hazizan Md; SANTULLI, Carlo; SARASINI, Fabrizio et al.Composites science and technology. 2014, Vol 94, pp 62-70, issn 0266-3538, 9 p.Article

Evaluating the localised through-thickness load transfer and damage initiation in a composite joint using digital image correlationCRAMMOND, G; BOYD, S. W; DULIEU-BARTON, J. M et al.Composites. Part A, Applied science and manufacturing. 2014, Vol 61, pp 224-234, issn 1359-835X, 11 p.Article

Experimental determination of the permeability of engineering textiles: Benchmark IIVERNET, N; RUIZ, E; DANZI, M et al.Composites. Part A, Applied science and manufacturing. 2014, Vol 61, pp 172-184, issn 1359-835X, 13 p.Article

Fabrication and characterization of fully biodegradable natural fiber-reinforced poly(lactic acid) compositesYICHENG DU; TONGFEI WU; NING YAN et al.Composites. Part B, Engineering. 2014, Vol 56, pp 717-723, issn 1359-8368, 7 p.Article

Fabrication of strong and thermally more stable jute fabric/polypropylene composites by compression molding along with γ-ray irradiationSHOHRAWARDY, M. H. S; ALAM, M. K; MINA, M. F et al.Polymer bulletin (Berlin. Print). 2014, Vol 71, Num 5, pp 1219-1239, issn 0170-0839, 21 p.Article

Fatigue micromechanism characterisation in carbon fibre reinforced polymers using synchrotron radiation computed tomographyGARCEA, S. C; MAVROGORDATO, M. N; SCOTT, A. E et al.Composites science and technology. 2014, Vol 99, pp 23-30, issn 0266-3538, 8 p.Article

Fire reaction properties of flax/epoxy laminates and their balsa-core sandwich composites with or without fire protectionKANDARE, Everson; LUANGTRIRATANA, Piyanuch; KANDOLA, Baljinder K et al.Composites. Part B, Engineering. 2014, Vol 56, pp 602-610, issn 1359-8368, 9 p.Article