Chain Extension Behavior and Thermo-Mechanical Properties of Polyamide 6 Chemically Modified With 1,1ʹ-Carbonyl-Bis-CaprolactamBUCCELLA, M; DORIGATO, A; PASQUALINI, E et al.Polymer engineering and science. 2014, Vol 54, Num 1, pp 158-165, issn 0032-3888, 8 p.Article

Determination of Robust Material Qualities and Processing Conditions for Laser Sintering of Polyamide 12WEGNER, Andreas; MIELICKI, Christoph; GRIMM, Tobias et al.Polymer engineering and science. 2014, Vol 54, Num 7, pp 1540-1554, issn 0032-3888, 15 p.Article

Independent Investigation on the Influences of the Processing Conditions on the Reclamation of Crosslinked Isoprene Rubber After the Impregnation of a Reclaiming ReagentJINWEI SHI; KUAN JIANG; HUA ZOU et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 11, issn 0021-8995, 40298.1-40298.8Article

Poly(ethyleneterephthalate) Glycolysates as Effective Toughening Agents for Epoxy ResinCHAUDHARY, Saurabh; PARTHASARATHY, Surekha; KUMAR, Devendra et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 4, issn 0021-8995, 39941.1-39941.9Article

Relationship between structure and properties of reprocessed glass fiber reinforced flame retardant poly(butylene terephthalate)ZHANG SHUIDONG; TAN LINGCAO; LIANG JIZHAO et al.Polymer degradation and stability. 2014, Vol 105, pp 140-149, issn 0141-3910, 10 p.Article

Reprocessing Effects on Polypropylene/Silica NanocompositesDORIGATO, Andrea; PEGORETTI, Alessandro.Journal of applied polymer science (Print). 2014, Vol 131, Num 10, issn 0021-8995, 40242.1-40242.7Article

Thermoplastic Elastomers Derived from Bio-Based MonomersGHASSEMI, Hossein; SCHIRALDI, David A.Journal of applied polymer science (Print). 2014, Vol 131, Num 3, issn 0021-8995, 39815.1-39815.8Article

Waste Ground Rubber Tire Powder/Thermoplastic Vulcanizate Blends: Preparation, Characterization, and CompatibilityXUN LU; WEIWEI WANG; LIN YU et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 3, issn 0021-8995, 39868.1-39868.9Article

Cu- and Zn-acetate-containing ionic liquids as catalysts for the glycolysis of poly(ethylene terephthalate)AL-SABAGH, A. M; YEHIA, F. Z; EISSA, A. M. F et al.Polymer degradation and stability. 2014, Vol 110, pp 364-377, issn 0141-3910, 14 p.Article

Decrosslinking of Crosslinked High-Density Polyethylene via Ultrasonically Aided Single-Screw ExtrusionISAYEV, Avraam I; KEYUAN HUANG.Polymer engineering and science. 2014, Vol 54, Num 12, pp 2715-2730, issn 0032-3888, 16 p.Article

Dielectric spectroscopy of recycled polylactideBADIA, J. D; MONREAL, L; DE JUANO-ARBONA, V. Sáenz et al.Polymer degradation and stability. 2014, Vol 107, pp 21-27, issn 0141-3910, 7 p.Article

Expanding the Application Field of Post-Consumer Poly(ethylene terephthalate) Through Structural Modification by Reactive BlendingRAFFA, Patrizio; COLTELLI, Maria-Beatrice; CASTELVETRO, Valter et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 19, issn 0021-8995, 40881.1-40881.11Article

Green Engineered Polypropylene Biodegradable Fibers Through Blending with Recycled Poly(lactic) Acid Plastic WastesTAVANAIE, M. A; MAHMUDI, A.Polymer-plastics technology and engineering (Softcover ed). 2014, Vol 53, Num 11-14, pp 1506-1517, issn 0360-2559, 12 p.Article

Hydrolysis of poly(lactic acid) into calcium lactate using ionic liquid [Bmim][OAc] for chemical recyclingXIUYAN SONG; HUI WANG; XUEQUN YANG et al.Polymer degradation and stability. 2014, Vol 110, pp 65-70, issn 0141-3910, 6 p.Article

Identification and characterization of plastics from small appliances and kinetic analysis of their thermally activated pyrolysisCAFIERO, Lorenzo; CASTOLDI, Eugenio; TUFFI, Riccardo et al.Polymer degradation and stability. 2014, Vol 109, pp 307-318, issn 0141-3910, 12 p.Article

Kinetics of hydrolysis of poly(ethylene terephthalate) wastes catalyzed by dual functional phase transfer catalyst: A mechanism of chain-end scissionLIRONG ZHANG.European polymer journal. 2014, Vol 60, pp 1-5, issn 0014-3057, 5 p.Article

Methanolysis of Poly(lactic acid) Using Acidic Functionalized Ionic Liquids as CatalystsXIUYAN SONG; HUI WANG; XIAODI ZHENG et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 19, issn 0021-8995, 40817.1-40817.6Article

Recycling of carbon fibers inserted in composite of DGEBA epoxy matrix by thermal degradationMATIELLI RODRIGUES, Gleice Guevara; DE PAIVA, Jane Maria Faulstich; DO CARMO, Janaína Braga et al.Polymer degradation and stability. 2014, Vol 109, pp 50-58, issn 0141-3910, 9 p.Article

Synthesis and Microstructural Characterization of Kaolin-Polyethylene CompositesAGYEI-TUFFOUR, B; BENSAH, Y. D; DAMOAH, L. N. W et al.Polymer composites. 2014, Vol 35, Num 8, pp 1507-1515, issn 0272-8397, 9 p.Article

PET wastes utilization in the synthesis of aliphatic-aromatic polyurethane elastomers : From macromolecules to materials to systemsMAZUREK, Magdalena M; TOMCZYK, Karolina; ROKICKI, Gabriel et al.Polymers for advanced technologies. 2014, Vol 25, Num 11, pp 1273-1284, issn 1042-7147, 12 p.Conference Paper

Aminolysis of poly(ethylene terephthalate) waste with ethylenediamine and characterization of α,ω-diamine productsHOANG, Cuong N; DANG, Yen H.Polymer degradation and stability. 2013, Vol 98, Num 3, pp 697-708, issn 0141-3910, 12 p.Article

Effect of Biological Degradation by Termites on the Flexural Properties of Pinewood Residue/Recycled High-Density Polyethylene CompositesLOPEZ-NARANJO, Edgar J; ALZATE-GAVIRIA, Liliana M; HERNANDEZ-ZARATE, Galdy et al.Journal of applied polymer science. 2013, Vol 128, Num 5, pp 2595-2603, issn 0021-8995, 9 p.Article

Highly filled thermoplastic elastomers from ground tire rubber, maleated polyethylene and high density polyethyleneKAKROODI, A. R; RODRIGUE, D.Plastics, rubber and composites. 2013, Vol 42, Num 3, pp 115-122, issn 1465-8011, 8 p.Article

Mechanical and Dynamic Mechanical Properties of Natural Rubber Blended with Waste Rubber Powder Modified by Both Microwave and Sol―Gel MethodMINGCHAO LUO; XIAOXUE LIAO; SHUANGQUAN LIAO et al.Journal of applied polymer science. 2013, Vol 129, Num 4, pp 2313-2320, issn 0021-8995, 8 p.Article

Plastics recycling: insights into life cycle impact assessment methodsRAJENDRAN, S; HODZIC, A; SCELSI, L et al.Plastics, rubber and composites. 2013, Vol 42, Num 1, pp 1-10, issn 1465-8011, 10 p.Article