The effect of titanium and nitrogen contents on the microstructure and mechanical properties of plain carbon steelsSHYI-CHIN WANG.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 1991, Vol 145, Num 1, pp 87-94, issn 0921-5093Article

Ductilization of Ni₃Al by macroalloying with PdCHIBA, A; HANADA, S; WATANABE, S et al.Acta metallurgica et materialia. 1991, Vol 39, Num 8, pp 1799-1805, issn 0956-7151Article

Influence of rare earth additions on rheological behaviour of Al-5Cu alloy in solid-liquid coexistence zoneLI QINGCHUN; CHEN KUIYING; ZENG SONGYAN et al.Materials science and technology. 1991, Vol 7, Num 8, pp 770-773, issn 0267-0836Article

Strength and ductile-phase toughening in the two-phase Nb/Nb₅Si₃ alloysMENDIRATTA, M. G; LEWANDOWSKI, J. J; DIMIDUK, D. M et al.Metallurgical transactions. A, Physical metallurgy and materials science. 1991, Vol 22, Num 7, pp 1573-1583, issn 0360-2133Article

Dynamic yield strength of a palladium alloy metallic glassCLINE, C. F; REAUGH, J. E.Journal de physique IV. Colloque. 1991, Vol 1, Num 3, pp C3.139-C3.146Conference Paper

Numerical research on dynamical behaviour of alloy titanium TC4ZHU, J. S; TU, Z. J.Journal de physique IV. Colloque. 1991, Vol 1, Num 3, pp C3.311-C3.316Conference Paper

Criterion for the triaxial X-ray residual stress analysisHANABUSA, T; NISHIOKA, K; FUJIWARA, H et al.Zeitschrift für Metallkunde. 1983, Vol 74, Num 5, pp 307-313, issn 0044-3093Article

Adhesion enhancement of magnetron-sputtered copper films by ion bombardment etching treatment of nickel and Inconel substrates : investigations by Auger electron spectroscopy and secondary ion mass spectroscopy of the ion beam effectsCAHOREAU, M; LEE, G. H; CAISSO, J et al.Journal of adhesion science and technology. 1991, Vol 5, Num 11, pp 987-999, issn 0169-4243Article

On the deformation of the <100> orientated γ' strengthening phase of the CMSX2 superalloyLOURS, P; COUJOU, A; COULOMB, P et al.Acta metallurgica et materialia. 1991, Vol 39, Num 8, pp 1787-1797, issn 0956-7151Article

Experimental studies of shear band formation through temperature measurements and high speed photographyDUFFY, J.Journal de physique IV. Colloque. 1991, Vol 1, Num 3, pp C3.645-C3.652Conference Paper

Thermal softening effects in type 224 carbon steelDIXON, P. R; PARRY, D. J.Journal de physique IV. Colloque. 1991, Vol 1, Num 3, pp C3.85-C3.92Conference Paper

Elaboration et évaluation d'une loi de comportement basée sur l'évolution de la microstructureROUXEL, A; BOIS, D.Journal de physique IV. Colloque. 1991, Vol 1, Num 3, pp C3.795-C3.802Conference Paper

Cyclic deformation of ferritic steel. I, Stress-strain response and structure evolutionROVEN, H. J; NES, E.Acta metallurgica et materialia. 1991, Vol 39, Num 8, pp 1719-1733, issn 0956-7151Article

The effect of through-thickness anisotropy on the cryogenic mechanical properties of an Al-Cu-Li-Zr alloy (Vintage III 2090-T81)CHU, D; MORRIS, J. W.Metallurgical transactions. A, Physical metallurgy and materials science. 1991, Vol 22, Num 8, pp 1789-1799, issn 0360-2133Article

Effect of adhesion-active sublayers on structure formation and properties of hard alloy KXHΦ15 on steelsMASLYUK, V. A; KAYUK, V. G; SMIRNOV, V. P et al.Poroškovaâ metallurgiâ (Kiev). 1991, Num 8, pp 35-41, issn 0032-4795Article

Plastic deformation of an iron-modified titanium trialuminide alloyLERF, R; MORRIS, D. G.Acta metallurgica et materialia. 1991, Vol 39, Num 10, pp 2419-2430, issn 0956-7151Article

Influence of she spread in values of aluminium alloy dynamic properties upon the final results of magnetic-pulse strainGLOUSCHENKOV, V; NOVOBRATSKY, R; BOURMISTROV, A et al.Journal de physique IV. Colloque. 1991, Vol 1, Num 3, pp C3.331-C3.334Conference Paper

Comment on Experimental verification of segregation of carbon and precipitation of carbides due to deep cryogenic treatment for tool steel by internal friction method by Li et al. [Mater. Sci. Eng. A 575 (2013) 51-60]HOYOS, J. J; VELEZ, J. M; GHILARDUCCI, A. A et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 613, pp 1-2, issn 0921-5093, 2 p.Article

Effect of preload stress on the dynamic response of 9%Cr heat-resistant steels with various microstructuresXINBAO LIU; SHIWA, Mitsuharu; SAWADA, Kota et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 606, pp 390-395, issn 0921-5093, 6 p.Article

Strengthening mechanism and thermal stability of severely deformed ferritic/martensitic steelHAO, T; FAN, Z. Q; ZHAO, S. X et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 596, pp 244-249, issn 0921-5093, 6 p.Article

Stress evolution during thermal cycling of copper/polyimide layered structuresCHUNSHENG ZHU; WENGUO NING; GAOWEI XU et al.Materials science in semiconductor processing. 2014, Vol 27, pp 819-826, issn 1369-8001, 8 p.Article

Effect of structure of pyrocarbon on the static and dynamic mechanical properties of carbon/carbon compositesMINGYANG HAO; RUIYING LUO; ZHENHUA HOU et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 614, pp 156-161, issn 0921-5093, 6 p.Article

Slow strain rate testing and stress corrosion cracking of ultra-fine grained and conventional Al-Mg alloySHARMA, Mala M; TOMEDI, Josh D; WEIGLEY, Timothy J et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 619, pp 35-46, issn 0921-5093, 12 p.Article

The response of polymeric composite structures to air-blast loading: a state-of-the-artLANGDON, G. S; CANTWELL, W. J; GUAN, Z. W et al.International materials reviews. 2014, Vol 59, Num 3, pp 159-177, issn 0950-6608, 19 p.Article

Transformation of shear loop into prismatic loops during bypass of an array of impenetrable particles by edge dislocationsGROH, Sébastien.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 618, pp 29-36, issn 0921-5093, 8 p.Article