Waste Newsprint Fibers for the Reinforcement of Radiation-Cured (Styrene-Butadiene Rubber)-Based Composites. Part II Characterization and Thermal PropertiesEI-NEMR, Khaled F; ALI, Magdy A; HASSAN, Medhat M et al.Journal of vinyl & additive technology. 2012, Vol 18, Num 4, pp 228-234, issn 1083-5601, 7 p.Article

An Investigation into the Thermal Stability of PVC/ Montmorillonite CompositesZHENG, X; GILBERT, M.Journal of vinyl & additive technology. 2011, Vol 17, Num 2, pp 77-84, issn 1083-5601, 8 p.Article

Evaluation and Optimization of the Mechanical Properties of Highly Filled PVC/(Wood Flour) Composites by Using Experimental DesignFASIHI, Mohammad; GARMABI, Hamid.Journal of vinyl & additive technology. 2011, Vol 17, Num 2, pp 112-119, issn 1083-5601, 8 p.Article

Kinetics of Water Absorption and Thermal Properties of Poly(lactic acid)/Organomontmorillonite/Poly(ethylene glycol) NanocompositesYING YING LEU; WEN SHYANG CHOW.Journal of vinyl & additive technology. 2011, Vol 17, Num 1, pp 40-47, issn 1083-5601, 8 p.Article

Potential Synthesis of Poly(1,2-dichloroethylene) via a Ring-Opening Metathesis PolymerizationXIANLONG GE; STARNES, William H.Journal of vinyl & additive technology. 2011, Vol 17, Num 2, pp 120-124, issn 1083-5601, 5 p.Article

Properties of Polypropylene/(Natural Rubber)/ Organomontmorillonite Nanocomposites Prepared by Melt BlendingBENDJAOUAHDOU, C; BENSAAD, S.Journal of vinyl & additive technology. 2011, Vol 17, Num 1, pp 48-57, issn 1083-5601, 10 p.Article

Effect of Maleic-Anhydride-Grafted Polypropylene as a Compatibilizer on the Properties of Polypropylene/ (Modified Carbon Black) CompositesQIUYING LI; CHIFEI WU; PING ZHU et al.Journal of vinyl & additive technology. 2011, Vol 17, Num 4, pp 260-264, issn 1083-5601, 5 p.Article

Influence of Compatibilizers and Processing Temperature on Microcellular Injection-Molded Polypropylene/(Waste Tire Powder) CompositesZHANG, Zhen-Xiu; FAN, Jun-Ling; PAL, Kaushik et al.Journal of vinyl & additive technology. 2011, Vol 17, Num 4, pp 254-259, issn 1083-5601, 6 p.Article

Comparative Evaluation of the Efficiency of a Series of Commercial Antioxidants Studied by Kinetic Modeling in a Liquid Phase and During the Melt Processing of Different PolyethylenesALLEN, Norman S; ZEYNALOV, Eldar B; SANCHEZ, Karmele Del Teso et al.Journal of vinyl & additive technology. 2010, Vol 16, Num 1, pp 1-14, issn 1083-5601, 14 p.Article

Correlation of Morphology, Rheology, and Performance Improvement in Gasoline Tubes Based on PA-6 NanocompositesMOGHRI, Mehdi; GARMABI, Hamid; MOLAJAVADI, Vadoud et al.Journal of vinyl & additive technology. 2010, Vol 16, Num 3, pp 195-203, issn 1083-5601, 9 p.Article

Characterization of 1,5-Pentanediol Dibenzoate as a Potential Green Plasticizer for Poly(vinyl chloride)FIRLOTTE, Nicolas; COOPER, David G; MARIC, Milan et al.Journal of vinyl & additive technology. 2009, Vol 15, Num 2, pp 99-107, issn 1083-5601, 9 p.Article

Effect of Trimethylolpropane Triacrylate (TMPTA) on the Properties of Irradiated Epoxidized Natural Rubber (ENR-50), Ethylene-(vinyl acetate) Copolymer (EVA), and an ENR-50/EVA BlendZURINA, M; ISMAIL, H; RATNAM, C. T et al.Journal of vinyl & additive technology. 2009, Vol 15, Num 1, pp 47-53, issn 1083-5601, 7 p.Article

A Brief Overview of Theories of PVC Plasticization and Methods Used to Evaluate PVC-Plasticizer InteractionDANIELS, Paul H.Journal of vinyl & additive technology. 2009, Vol 15, Num 4, pp 219-223, issn 1083-5601, 5 p.Article

Effects of Different Preparation Methods on the Properties of Poly[ethylene-co-(vinyl acetate)]/(Standard Malaysian Natural Rubber)/Organoclay NanocompositesMUNUSAMY, Y; ISMAIL, H; MARIATTI, M et al.Journal of vinyl & additive technology. 2009, Vol 15, Num 4, pp 244-251, issn 1083-5601, 8 p.Article

Influence of Regenerated Polyurethane on the Mechanical Properties and Thermal Stability of Polypropylene During Multiple Processing CyclesSHU LING ZHANG; ZHEN XIU ZHANG; JIN KUK KIM et al.Journal of vinyl & additive technology. 2008, Vol 14, Num 1, pp 34-38, issn 1083-5601, 5 p.Article

Effect of Hydrated Fillers and Red Phosphorus on the Limiting Oxygen Index of Poly(ethylene-co-vinyl actate)-Poly(vinyl butyral) and Low Density Polyethylene-Poly(ethylene-co-vinyl alcohol) BlendsBURNS, Mara; WAGENKNECHT, Udo; KRETZSCHMAR, Berndt et al.Journal of vinyl & additive technology. 2008, Vol 14, Num 3, pp 113-119, issn 1083-5601, 7 p.Article

Effects of Alkaline and Silane Treatments on the Water-Resistance Properties of Wood-Fiber-Reinforced Recycled Plastic CompositesCUI, Yi-Hua; LEE, Stephen; JIE TAO et al.Journal of vinyl & additive technology. 2008, Vol 14, Num 4, pp 211-220, issn 1083-5601, 10 p.Article

PVC Nanocomposites-Nanoclay Chemistry and PerformanceBENDERLY, Daphne; OSORIO, Frank; IJDO, Wouter L et al.Journal of vinyl & additive technology. 2008, Vol 14, Num 4, pp 155-162, issn 1083-5601, 8 p.Article

Study of Processability of Poly(vinyl chloride) : Effects of Acrylic and Chlorinated Polyethylene Impact Modifiers, Oil Palm Empty Fruit Bunch Fiber, and Mixing TemperatureAZNIZAM ABU BAKAR; HASSAN, Azman; AHMAD FUAD MOHD YUSOF et al.Journal of vinyl & additive technology. 2008, Vol 14, Num 4, pp 204-210, issn 1083-5601, 7 p.Article

Considerations affecting landfill biodegradability of PVCGROSSMAN, Richard F; SCHLEICHER, John E; D'ALESSIO, Lorna et al.Journal of vinyl & additive technology. 2007, Vol 13, Num 3, pp 133-135, issn 1083-5601, 3 p.Article

Exploitation of the complex chemistry of hindered amine stabilizers in effective plastics stabilizationPOSPISIL, J; PILAR, J; NESPUREK, S et al.Journal of vinyl & additive technology. 2007, Vol 13, Num 3, pp 119-132, issn 1083-5601, 14 p.Article

Mechanical and heat deflection properties of PVC/PMMA/montmorillonite compositesPAGE, D. J. Y. S; CUNNINGHAM, N; CHAN, N et al.Journal of vinyl & additive technology. 2007, Vol 13, Num 2, pp 91-97, issn 1083-5601, 7 p.Article

Mechanical properties of (ethylene acrylate copolymer)-modified polypropylene/TiO₂ blendsFAN, Xiyun S.Journal of vinyl & additive technology. 2007, Vol 13, Num 2, pp 65-70, issn 1083-5601, 6 p.Article

Optimization of plastisol processes by dynamic mechanical analysisDANIELS, Paul H.Journal of vinyl & additive technology. 2007, Vol 13, Num 3, pp 151-154, issn 1083-5601, 4 p.Article

Plasticization effect of lignin in some highly filled vinyl formulationsFELDMAN, D; BANU, D; EL-AAHOURY, A et al.Journal of vinyl & additive technology. 2007, Vol 13, Num 1, pp 14-21, issn 1083-5601, 8 p.Article