The effect of the addition of talc on tribological properties of aramid fiber-reinforced polyimide composites under high vacuum, ultraviolet or atomic oxygen environmentGAI ZHAO; BAIXING LIU; QIHUA WANG et al.Surface and interface analysis. 2013, Vol 45, Num 2, pp 605-611, issn 0142-2421, 7 p.Article

A study on effects of TiB₂ contents on reactive products and compressive strength of brazed CBN grainsWENFENG DING; JIUHUA XU; ZHENZHEN CHEN et al.Surface and interface analysis. 2009, Vol 41, Num 3, pp 238-243, issn 0142-2421, 6 p.Article

Combustion synthesis/quasi-isostatic pressing of TiC_0.7-NiTi cermets : microstructure and transformation characteristicsSTRUTT, E. R; RADETIC, T; OLEVSKY, E. A et al.Journal of materials science. 2008, Vol 43, Num 17, pp 5905-5923, issn 0022-2461, 19 p.Article

Rapid Preparation and SEM Microstructural Characterization of Nickel-Yttria-Stabilized Zirconia CermetsMONACHON, Christian; HESSLER-WYSER, Aïcha; FAES, Antonin et al.FAES, Antonin et al.Journal of the American Ceramic Society. 2008, Vol 91, Num 10, pp 3405-3407, issn 0002-7820, 3 p.Article

Si₃N₄/Mg composites with an interpenetrating networkWANG, Shou-Ren; GENG, Hao-Ran; WANG, Ying-Zi et al.Journal of materials science. 2006, Vol 41, Num 17, pp 5751-5757, issn 0022-2461, 7 p.Article

Percolation thresholds in the homogenization of spheroidal particles oriented in two directionsMACKAY, Tom G; LAKHTAKIA, Akhlesh.Optics communications. 2006, Vol 259, Num 2, pp 727-737, issn 0030-4018, 11 p.Article

Composites reinforced with single crystalline oxide fibres : experiments and modelling : Advances in multi-scale modelling of composite material systems and componentsMILEIKO, S. T.Journal of materials science. 2006, Vol 41, Num 20, pp 6708-6717, issn 0022-2461, 10 p.Article

Effect of mg addition on the self-propagating high temperature synthesis reaction in Al-Ti-C systemWANG, H. Y; ZHAO, F; JIANG, Q. C et al.Journal of materials science. 2005, Vol 40, Num 5, pp 1255-1257, issn 0022-2461, 3 p.Article

New approach for preparation of ultrafine Cu particles and shell/core compounds of Cu/CuO and Cu/Cu₂OZHENG, H. M; LIU, X. H; YANG, S. B et al.Journal of materials science. 2005, Vol 40, Num 4, pp 1039-1041, issn 0022-2461, 3 p.Article

Particle size effect on the elevated temperature wear behavior of SiCp/Cu compositesYONGZHONG ZHAN; GUODING ZHANG.Journal of materials science. 2005, Vol 40, Num 1, pp 223-225, issn 0022-2461, 3 p.Article

High-temperature OM investigation of the early stage of (TiC+TiB)/TI oxidationYEXIA QIN; WEIJIE LU; DONG XU et al.Journal of materials science. 2005, Vol 40, Num 3, pp 687-692, issn 0022-2461, 6 p.Article

Microstructures and mechanical properties of a directionally solidified NiAl-Mo eutectic alloyBEI, H; GEORGE, E. P.Acta materialia. 2005, Vol 53, Num 1, pp 69-77, issn 1359-6454, 9 p.Article

Finite-element simulations of cracks near interfaces : Effects of thermal, elastic, and plastic mismatchTILBROOK, Matthew T; HOFFMAN, Mark; REIMANIS, Ivar E et al.Journal of the American Ceramic Society. 2005, Vol 88, Num 10, pp 2833-2838, issn 0002-7820, 6 p.Article

Formation and growth studies of the (Bi,Pb)₂Sr₂Ca₂Cu₃O₁₀ phase in Ag sheathed tapesCHEN, X. P; GRIVEL, J.-C; LI, M. Y et al.Journal of materials science. 2005, Vol 40, Num 21, pp 5721-5726, issn 0022-2461, 6 p.Article

Hot deformation and processing map of 15%SiC_p/2009 Al compositeXIAO, B. L; FAN, J. Z; TIAN, X. F et al.Journal of materials science. 2005, Vol 40, Num 21, pp 5757-5762, issn 0022-2461, 6 p.Article

Orientation and grain boundary microstructure of alumina in Al/Al₂O₃ composites produced by reactive metal penetrationMURTHY, Varanasi S. R; KAWAHARA, Koichi; SAITO, Yasuko et al.Journal of the American Ceramic Society. 2005, Vol 88, Num 10, pp 2902-2907, issn 0002-7820, 6 p.Article

Fracture properties of a fiber-metal laminates based on magnesium alloyCORTES, P; CANTWELL, W. J.Journal of materials science. 2004, Vol 39, Num 3, pp 1081-1083, issn 0022-2461, 3 p.Article

Development of electric heating actuators of fiber reinforced metal compositeYUN LU; HIROHASHI, M; FUSHENG PAN et al.Journal of materials science. 2004, Vol 39, Num 3, pp 969-973, issn 0022-2461, 5 p.Article

Melting behavior of nanosized lead particles embedded in an aluminum matrixZHAN SHI; WYNBLATT, Paul; SRINIVASAN, S. G et al.Acta materialia. 2004, Vol 52, Num 8, pp 2305-2316, issn 1359-6454, 12 p.Article

Microstructure and wear behaviour of aluminium alloys containing embedded nanoscaled lead dispersoidsBHATTACHARYA, Victoria; CHATTOPADHYAY, K.Acta materialia. 2004, Vol 52, Num 8, pp 2293-2304, issn 1359-6454, 12 p.Article

Reactive wetting of SiO₂ substrates by molten AlPING SHEN; FUJII, Hidetoshi; MATSUMOTO, Taihei et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2004, Vol 35, Num 2, pp 583-588, issn 1073-5623, 6 p.Article

Self-propagating high-temperature synthesis of composite material TiB2-FeLEPAKOVA, O. K; RASKOLENKO, L. G; MAKSIMOV, Yu. M et al.Journal of materials science. 2004, Vol 39, Num 11, pp 3723-3732, issn 0022-2461, 10 p.Article

Synthesis and characterization of TiC-reinforced iron-based composites. Part I: On synthesis and microstructural characterizationBANDYOPADHYAY, T. K; CHATTERJEE, S; DAS, K et al.Journal of materials science. 2004, Vol 39, Num 18, pp 5735-5742, issn 0022-2461, 8 p.Article

The thermo-mechanical behaviour of Cu-Cr in-situ compositeLEE, K. L.Journal of materials science. 2004, Vol 39, Num 9, pp 3047-3055, issn 0022-2461, 9 p.Article

Synthesis and characterization of TiC-reinforced iron-based composites. Part II on mechanical characterizationBANDYOPADHYAY, T. K; DAS, K.Journal of materials science. 2004, Vol 39, Num 21, pp 6503-6508, issn 0022-2461, 6 p.Article