Modelling of solidification of binary fluids with non-linear viscosity modelsWACLAWCZYK, T; STERNEL, D; SCHÄFER, M et al.WIT transactions on engineering sciences. 2009, Vol v. 63, pp 55-66, issn 1746-4471, isbn 978-1-8456-4188-7 1-8456-4188-4, 1Vol, 12 p.Conference Paper

Texture of rapidly solidified foils of aluminium and its alloysSHEPELEVICH, V. G; SIUTSOVA, P. A; NEUMERZHYTSKAYA, E. Yu et al.Journal of alloys and compounds. 2005, Vol 403, Num 1-2, pp 267-269, issn 0925-8388, 3 p.Article

Pore shape development from a bubble captured by a solidification frontWEI, P. S; HSIAO, S. Y.International journal of heat and mass transfer. 2012, Vol 55, Num 25-26, pp 8129-8138, issn 0017-9310, 10 p.Article

Analysis of melting and resolidification in a two-component metal powder bed subjected to temporal Gaussian heat fluxKONRAD, Chad; YUWEN ZHANG; BIN XIAO et al.International journal of heat and mass transfer. 2005, Vol 48, Num 19-20, pp 3932-3944, issn 0017-9310, 13 p.Article

Retraction notice to Effects of minor scandium on as-cast microstructure, mechanical properties and casting fluidity of ZA84 magnesium Alloy [Mater. Sci. Eng. A 527 (2009) 1074―1081]FUSHENG PAN; MINGBO YANG; LIANG CHENG et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2013, Vol 587, issn 0921-5093, p. 397Article

Position and spacing of sidebranches in binary systemXIANG MING LI; ZI DONG WANG.Journal of crystal growth. 2011, Vol 318, Num 1, pp 55-58, issn 0022-0248, 4 p.Conference Paper

Supercritical-subcritical crossover in solidificationAGARWAL, S; JOHNS, L. E; NARAYANAN, R et al.Journal of crystal growth. 2009, Vol 311, Num 13, pp 3511-3516, issn 0022-0248, 6 p.Article

Influence on the macrosegregation of binary metallic alloys by thermoelectromagnetic convection and electromagnetic stirring combinationKALDRE, I; FAUTRELLE, Y; ETAY, J et al.Journal of crystal growth. 2014, Vol 402, pp 230-233, issn 0022-0248, 4 p.Article

Phase field modeling with large interface thickness and undercoolingCHEN, C. C; LIN, H. K; LAN, C. W et al.Journal of crystal growth. 2014, Vol 385, pp 121-126, issn 0022-0248, 6 p.Conference Paper

Influence of cooling rate on the Fe intermetallic formation in an AA6063 Al alloyVERMA, A; KUMAR, S; GRANT, P. S et al.Journal of alloys and compounds. 2013, Vol 555, pp 274-282, issn 0925-8388, 9 p.Article

The Ternary Reciprocal System Na, Ba // BO2, FBEKKER, T. B; FEDOROV, P. P; KOKH, A. E et al.Crystal growth & design. 2012, Vol 12, Num 1, pp 129-134, issn 1528-7483, 6 p.Article

Three-dimensional adaptive phase field modeling of directional solidification of a binary alloy: 2D―3D transitionsTSAI, Y. L; CHEN, C. C; LAN, C. W et al.International journal of heat and mass transfer. 2010, Vol 53, Num 9-10, pp 2272-2283, issn 0017-9310, 12 p.Article

Enhancement on the faceted growth and the coarsening of the MnBi primary phase during the directional solidification under a high magnetic fieldXI LI; ZHONGMING REN; FAUTRELLE, Yves et al.Philosophical magazine letters. 2009, Vol 89, Num 8, pp 475-482, issn 0950-0839, 8 p.Article

Synthesis and compressive properties of Al-Ni-Y metallic glassFU, H. M; MU, J; WANG, A. M et al.Philosophical magazine letters. 2009, Vol 89, Num 11, pp 711-716, issn 0950-0839, 6 p.Article

Internal cooling to produce aluminium alloy slurries for rheocastingBIROL, Yucel.Journal of alloys and compounds. 2009, Vol 480, Num 2, pp 365-368, issn 0925-8388, 4 p.Article

Stability of bulk metastable Fe₈₃B₁₇ eutectic alloy prepared by hypercooling methodYANG, C; LIU, F; YANG, G et al.Applied physics. A, Materials science & processing (Print). 2007, Vol 86, Num 2, pp 231-234, issn 0947-8396, 4 p.Article

Analysis of melting and solidification behaviour of glass-forming alloys by synchrotron radiationAYCAN BASER, Tanya; BOSTROM, Magnus; STOICA, Mihai et al.Advanced engineering materials (Print). 2007, Vol 9, Num 6, pp 492-495, issn 1438-1656, 4 p.Conference Paper

Quantification of mesh induced anisotropy effects in the phase-field methodMULLIS, A. M.Computational materials science. 2006, Vol 36, Num 3, pp 345-353, issn 0927-0256, 9 p.Article

Phase composition, microstructures and magnetic properties of melt-spun Nd1.2Fe10.5Mo1.5 ribbons and their nitridesZHONG LIN; JINGZHI HAN; SHUNQUAN LIU et al.Journal of magnetism and magnetic materials. 2012, Vol 324, Num 2, pp 196-199, issn 0304-8853, 4 p.Article

Analysis of macro segregation in twin-roll cast aluminium strips via solidification curvesBIROL, Yucel.Journal of alloys and compounds. 2009, Vol 486, Num 1-2, pp 168-172, issn 0925-8388, 5 p.Article

Assessment of modification and formation of intermetallic compounds in aluminum alloy using thermal analysisSHABESTARI, S. G; GHODRAT, S.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2007, Vol 467, Num 1-2, pp 150-158, issn 0921-5093, 9 p.Article

Effect of pulsed magnetic field on microstructure of 1Cr18Ni9Ti austenitic stainless steelQIUSHU LI; CHANGJIANG SONG; HAIBIN LI et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2007, Vol 466, Num 1-2, pp 101-105, issn 0921-5093, 5 p.Article

A scaling analysis of alloy solidification in presence of electromagnetic stirringKUMAR, Arvind; DUTTA, Pradip.Journal of physics. D, Applied physics (Print). 2006, Vol 39, Num 14, pp 3058-3066, issn 0022-3727, 9 p.Article

Microstructures of Fe₂RE (RE; Tb and Nd) alloys produced by drop tube processingOZAWA, Shumpei; KURIBAYASHI, Kazuhiko.Journal of alloys and compounds. 2006, Vol 415, Num 1-2, pp 129-133, issn 0925-8388, 5 p.Article

Dendritic solidification morphology viewed from the perspective of constructal theoryCIOBANAS, A. I; BEJAN, A; FAUTRELLE, Y et al.Journal of physics. D, Applied physics (Print). 2006, Vol 39, Num 24, pp 5252-5266, issn 0022-3727, 15 p.Article