Ab initio investigation of tensile strengths of metal(111)/α-Al2O3(0001) interfacesHOCKER, Stephen; SCHMAUDER, Siegfried; BAKULIN, Alexander et al.Philosophical magazine (2003. Print). 2014, Vol 94, Num 1-3, pp 265-284, issn 1478-6435, 20 p.Article

Synthesis and compressive properties of Al-Ni-Y metallic glassFU, H. M; MU, J; WANG, A. M et al.Philosophical magazine letters. 2009, Vol 89, Num 11, pp 711-716, issn 0950-0839, 6 p.Article

Inhomogeneous yielding and work hardening of a fine grained Al―Mg alloyLLOYD, D. J; JIN, H.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2013, Vol 585, pp 455-459, issn 0921-5093, 5 p.Article

A nanograined/ultrafine-grained low-carbon microalloyed steel processed by warm rollingJUN HU; DU, Lin-Xiu; HUI XIE et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 605, pp 186-191, issn 0921-5093, 6 p.Article

A study of fatigue damage development in extruded Mg―Gd―Y magnesium alloyFENGHUA WANG; JIE DONG; MIAOLIN FENG et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 589, pp 209-216, issn 0921-5093, 8 p.Article

Characterization of Al-Li 2099 extrusions and the influence of fiber texture on the anisotropy of static mechanical propertiesBOIS-BROCHU, Alexandre; BLAIS, Carl; GOMA, Franck Armel Tchitembo et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 597, pp 62-69, issn 0921-5093, 8 p.Article

Controlled Diffusion Solidification (CDS) of Al-Zn-Mg-Cu (7050): Microstructure, heat treatment and mechanical propertiesGHIAASIAAN, Reza; XIAOCHUN ZENG; SHANKAR, Sumanth et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 594, pp 260-277, issn 0921-5093, 18 p.Article

Effect of annealing on the mechanical properties of nano-copper reinforced open-cell aluminum foamsYI SUN; BURGUENO, Rigoberto; WEI WANG et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 613, pp 340-351, issn 0921-5093, 12 p.Article

Effect of chemical composition on the microstructure, tensile properties and fatigue behavior of sand-cast Mg-Gd-Y-Zr alloyLONGKANG JIANG; WENCAI LIU; GUOHUA WU et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 612, pp 293-301, issn 0921-5093, 9 p.Article

Effect of geometric array of eutectic silicon particles and microscopic voids on the tensile behaviour of a cast aluminium alloyCHOONG DO LEE; TAE IL SO; KWANG SEON SHIN et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 599, pp 28-37, issn 0921-5093, 10 p.Article

Effect of graphite addition on mechanical behavior of A16061/TiB₂ hybrid composite using acoustic emissionSURESH, S; SHENBAGA VINAYAGA MOORTHI, N; VETTIVEL, S. C et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 612, pp 16-27, issn 0921-5093, 12 p.Article

Effect of heating rate on the microstructure, texture and tensile properties of continuous cast AA 5083 aluminum alloyXIA, S. L; MA, M; ZHANG, J. X et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 609, pp 168-176, issn 0921-5093, 9 p.Article

Effect of multi-pass equal channel angular pressing on microstructure and mechanical properties of Mg_97.1Zn₁Gd_1.8Zr_0.1 alloyFUMIN LU; AIBIN MA; JINGHUA JIANG et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 594, pp 330-333, issn 0921-5093, 4 p.Article

Effect of stacking fault energy on mechanical properties of nanostructured FCC materials processed by the ARB processJAMAATI, Roohollah; MOHAMMAD REZA OROGHINEJAD.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 606, pp 443-450, issn 0921-5093, 8 p.Article

Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steelKYOSUN PARK; NISHIYAMA, Masato; NAKADA, Nobuo et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 604, pp 135-141, issn 0921-5093, 7 p.Article

Effect of warm deformation on microstructure and mechanical properties of a layered and nanostructured 304 stainless steelCHEN, A. Y; SHI, S. S; TIAN, H. L et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 595, pp 34-42, issn 0921-5093, 9 p.Article

Effects of Nb addition on microstructure and mechanical properties of TiNiNb alloys fabricated by elemental powder sinteringJING LI; HUIFENG WANG; JUE LIU et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 609, pp 235-240, issn 0921-5093, 6 p.Article

Effects of Zr addition on the microstructure and mechanical behavior of a fine-grained nickel-based superalloy at elevated temperaturesTSAI, Yi-Lung; WANG, Sea-Fue; BOR, Hui-Yun et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 607, pp 294-301, issn 0921-5093, 8 p.Article

Evaluating the effects of loading parameters on single-crystal slip in tantalum using molecular mechanicsALLEMAN, Coleman; GHOSH, Somnath; LUSCHER, D. J et al.Philosophical magazine (2003. Print). 2014, Vol 94, Num 1-3, pp 92-116, issn 1478-6435, 25 p.Article

Flow stress analysis of ultrafine grained AA 1050 by plane strain compression testMOHAMMAD SADEGH MOHEBBI; AKBARZADEH, Abbas; YOON, Young-Ok et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 593, pp 136-144, issn 0921-5093, 9 p.Article

Friction taper plug welding for S355 steel in underwater wet conditions: Welding performance, microstructures and mechanical propertiesLEI CUI; XINQI YANG; DONGPO WANG et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 611, pp 15-28, issn 0921-5093, 14 p.Article

High strain rate tensile performance and microstructural evolution of Al/Cu laminated composite under dynamic loadingLI, X. B; ZU, G. Y; WANG, P et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 612, pp 89-95, issn 0921-5093, 7 p.Article

Hot deformation behavior of hot-rolled AZ31 and AZ61 magnesium alloysOLGUIN-GONZALEZ, M. L; HERNANDEZ-SILVA, D; GARCIA-BERNAL, M. A et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 597, pp 82-88, issn 0921-5093, 7 p.Article

Hot tensile and stress rupture behavior of friction welded alloy 718 in different pre-and post-weld heat treatment conditionsDAMODARAM, R; GANESH SUNDARA RAMAN, S; SATYANARAYANA, D. V. V et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 612, pp 414-422, issn 0921-5093, 9 p.Article

Improving the strength and ductility of Al-Mg-Si-Cu alloys by a novel thermo-mechanical treatmentZHIXIU WANG; HAI LI; FENFEN MIAO et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 607, pp 313-317, issn 0921-5093, 5 p.Article