Impact toughness of an ultrafine-grained A1-11mass%Si alloy processed by rotary-die equal-channel angular pressingAIBIN MA; SUZUKI, Kazutaka; NISHIDA, Yoshinori et al.Acta materialia. 2005, Vol 53, Num 1, pp 211-220, issn 1359-6454, 10 p.Article

Effect of microstructure on tensile behavior of thixoformed 357-T5 semisolid al alloyPARK, Chul; KIM, Sangshik; KWON, Yongnam et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2004, Vol 35, Num 4, pp 1407-1410, issn 1073-5623, 4 p.Article

Fracture and fatigue resistance of Mo-Si-B alloys for ultrahigh-temperature structural applicationsKRUZIC, J. J; SCHNEIBEL, J. H; RITCHIE, R. O et al.Scripta materialia. 2004, Vol 50, Num 4, pp 459-464, issn 1359-6462, 6 p.Article

Mechanical behavior of a cryomilled nanostructured Al-7.5 pct Mg alloyHAN, B. Q; MATEJCZYK, D; ZHOU, F et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2004, Vol 35, Num 3, pp 947-949, issn 1073-5623, 3 p.Article

On the suppression of dynamic embrittlement in Cu-8wt%Sn by an addition of zirconiumLIU, X. Y; KANE, W; MCMAHON, C. J et al.Scripta materialia. 2004, Vol 50, Num 5, pp 673-677, issn 1359-6462, 5 p.Article

Toughness enhancement of Ce-TZP by annealing in argonVLEUGELS, J; ZHAO, C; VAN DER BIEST, O et al.Scripta materialia. 2004, Vol 50, Num 5, pp 679-683, issn 1359-6462, 5 p.Article

Ductile-brittle transition temperature of ultrafine ferrite/cementite microstructure in a low carbon steel controlled by effective grain sizeHANAMURA, T; YIN, F; NAGAI, K et al.ISIJ international. 2004, Vol 44, Num 3, pp 610-617, issn 0915-1559, 8 p.Article

Effects of temperature and shot peening on S-N behavior of a PM Ni-base superalloy UDIMET 720LUO, J; BOWEN, P.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2004, Vol 35, Num 3A, pp 1007-1016, issn 1073-5623, 10 p.Article

The effect of the reduction of carbon content on the toughness of high chromium white irons in the as-cast stateKOOTSOOKOS, A; GATES, J. D.Journal of materials science. 2004, Vol 39, Num 1, pp 73-84, issn 0022-2461, 12 p.Article

The high-temperature strength of some Fe₃Al alloysMORRIS, D. G; MUNOZ-MORRIS, M. A; BAUDIN, C et al.Acta materialia. 2004, Vol 52, Num 9, pp 2827-2836, issn 1359-6454, 10 p.Article

Uniaxial deformation of open-cell aluminum foam: the role of internal damageSAN MARCHI, C; DESPOIS, J.-F; MORTENSEN, A et al.Acta materialia. 2004, Vol 52, Num 10, pp 2895-2902, issn 1359-6454, 8 p.Article

Mechanical properties of tape cast nickel-based anode materials for solid oxide fuel cells before and after reduction in hydrogenRADOVIC, M; LARA-CURZIO, E.Acta materialia. 2004, Vol 52, Num 20, pp 5747-5756, issn 1359-6454, 10 p.Article

Quality assessment of artificially aged A357 aluminum alloy cast ingots by introducing approximate expressions of the quality index Q_DALEXOPOULOS, N. D; PANTELAKIS, S. G.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2004, Vol 35, Num 10, pp 3079-3089, issn 1073-5623, 11 p.Article

Tensile and fatigue behavior of Al-based metal matrix composites reinforced with continuous carbon or alumina fibers: Part II. Quasi-unidirectional composite cross-ply laminatesVALLE, R; VIDAL-SETIF, M.-H; SCHUSTER, D et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2004, Vol 35, Num 10, pp 3307-3317, issn 1073-5623, 11 p.Article

The effect of lamellar morphology on tensile and high-cycle fatigue behavior of orthorhombic Ti-22Al-27Nb alloyHAGIWARA, Masuo; ARAOKA, Aya; SEUNG JIN YANG et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2004, Vol 35, Num 7, pp 2161-2170, issn 1073-5623, 10 p.Article

Fatigue crack propagation in pseudoelastic TiNi smart microcomponentsFILIP, Peter; PALIWAL, Manish; MAZANEC, Karel et al.Zeitschrift für Metallkunde. 2004, Vol 95, Num 5, pp 356-361, issn 0044-3093, 6 p.Conference Paper

Einfluss einer Laves-Phase auf die Kriechschädigungsprozesse in einem hochwarmfesten 9% Cr-Stahl mit Mo und B = The effect of a Laves Phase on creep damage in a high-temperature 9% Cr steel including Mo and BSTOCKER, Christian; SONNLEITNER, Roman.Praktische Metallographie. 2003, Vol 40, Num 5, pp 242-256, issn 0032-678X, 15 p.Article

Effect of precipitated Co solid solution on moisture-induced embrittlement of L1₂-type Co₃Ti ordered alloysKANENO, Y; NAKAMURA, T; INOUE, H et al.Acta materialia. 2003, Vol 51, Num 7, pp 2113-2123, issn 1359-6454, 11 p.Article

Effects of indium on the mechanical properties of ternary Sn-In-Ag soldersYEH, M. S.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2003, Vol 34, Num 2, pp 361-365, issn 1073-5623, 5 p.Article

Room temperature fracture toughness and high temperature strength of T₂/Mo_ss and (Mo, Nb)_ss/T₁/T₂ eutectic alloys in the Mo-Si-B systemITO, Kazuhiro; KUMAGAI, Michiaki; HAYASHI, Taisuke et al.Scripta materialia. 2003, Vol 49, Num 4, pp 285-290, issn 1359-6462, 6 p.Article

Scatter in fatigue life due to effects of porosity in cast A356-T6 aluminum-silicon alloysYI, J. Z; GAO, Y. X; LEE, P. D et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2003, Vol 34, Num 9, pp 1879-1890, issn 1073-5623, 12 p.Article

Slip geometry of dislocations related to cutting of the γ' phase in a new generation single-crystal superalloyZHANG, J. X; MURAKUMO, T; KOIZUMI, Y et al.Acta materialia. 2003, Vol 51, Num 17, pp 5073-5081, issn 1359-6454, 9 p.Article

The effect of solidification time and heat treatment on the fatigue properties of a cast 319 aluminum alloyBOILEAU, James M; ALLISON, John E.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2003, Vol 34, Num 9, pp 1807-1820, issn 1073-5623, 14 p.Article

The effect of loading direction and stacking sequence on the strength in quasi-isotropic CFRP laminatesNAGATA, Masamichi; TAKEZONO, Shigeo; CHEN, Jianqiao et al.Materials science research international. 2003, Vol 9, Num 2, pp 131-137, issn 1341-1683, 7 p.Article

Low- and high-cycle fatigue properties of ultrafine-grained low carbon steelsSAWAI, Tatsuaki; MATSUOKA, Saburo; TSUZAKI, Kaneaki et al.Tetsu-to-hagané. 2003, Vol 89, Num 6, pp 725-733, issn 0021-1575, 9 p.Article