Edge machining effects on the failure of polymer matrix composite couponsGHIDOSSI, Patrick; EL MANSORI, Mohamed; PIERRON, Fabrice et al.Composites. Part A, Applied science and manufacturing. 2004, Vol 35, Num 7-8, pp 989-999, issn 1359-835X, 11 p.Conference Paper

High-speed synchrotron X-ray phase contrast imaging for analysis of low-Z composite microstructureYEAGER, J. D; LUO, S. N; JENSEN, Bj et al.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 6, pp 885-892, issn 1359-835X, 8 p.Article

Shock propagation in a tape wrapped carbon fibre compositeWOOD, D. C; APPLEBY-THOMAS, G. J; HAZELL, P. J et al.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 9, pp 1555-1560, issn 1359-835X, 6 p.Article

Influence of process induced defects on the failure of composite T-joint specimensTRASK, R. S; HALLETT, S. R; HELENON, F. M. M et al.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 4, pp 748-757, issn 1359-835X, 10 p.Article

Mechanical behaviour of polymer-modified ferrocement under different exposure conditions: An experimental studyRAMLI, Mahyuddin; AMIN AKHAVAN TABASSI.Composites. Part B, Engineering. 2012, Vol 43, Num 2, pp 447-456, issn 1359-8368, 10 p.Article

Limit analysis of FRP strengthened masonry arches via nonlinear and linear programmingCAPORALE, A; FEO, L; LUCIANO, R et al.Composites. Part B, Engineering. 2012, Vol 43, Num 2, pp 439-446, issn 1359-8368, 8 p.Article

RC square sections confined by FRP: Analytical prediction of peak strengthNISTICO, Nicola; MONTI, Giorgio.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 127-137, issn 1359-8368, 11 p.Article

The simulation of bone healing process of fractured tibia applied with composite bone plates according to the diaphyseal oblique angle and plate modulusSON, Dae-Sung; CHANG, Seung-Hwan.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 1325-1335, issn 1359-8368, 11 p.Article

Thermal properties measurement and heat storage analysis of paraffin/graphite composite phase change materialLACHHEB, Mohamed; KARKRI, Mustapha; ALBOUCHI, Fethi et al.Composites. Part B, Engineering. 2014, Vol 66, pp 518-525, issn 1359-8368, 8 p.Article

Combined cohesive-bridging zone model for prediction of the debonding between the FRP and concrete beam interface with effect of adherend shear deformationsHOUACHINE, H. R. E; SEREIR, Z; KERBOUA, B et al.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 871-880, issn 1359-8368, 10 p.Article

Compressive relaxation of the stress and resistance for carbon nanotube filled silicone rubber compositeLUHENG WANG; YANYAN HAN.Composites. Part A, Applied science and manufacturing. 2013, Vol 47, pp 63-71, issn 1359-835X, 9 p.Article

Experimental investigation of the mechanical connection between FRP laminates and concreteREALFONZO, Roberto; MARTINELLI, Enzo; NAPOLI, Annalisa et al.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 341-355, issn 1359-8368, 15 p.Article

Solvothermal synthesis of carbon nanostructure and its influence on thermal stability of poly styreneHAMID REZA SHAMS; GHANBARI, Davood; SALAVATI-NIASARI, Masoud et al.Composites. Part B, Engineering. 2013, Vol 55, pp 362-367, issn 1359-8368, 6 p.Article

An overview on the cellulose based conducting compositesKUMAR PANDEY, Jitendra; TAKAGI, Hitoshi; NORIO NAKAGAITO, Antonio et al.Composites. Part B, Engineering. 2012, Vol 43, Num 7, pp 2822-2826, issn 1359-8368, 5 p.Article

Flexural properties of macadamia nutshell particle reinforced polyester compositesCHENSONG DONG; DAVIES, Ian J.Composites. Part B, Engineering. 2012, Vol 43, Num 7, pp 2751-2756, issn 1359-8368, 6 p.Article

Limit analysis of masonry arches with finite compressive strength and externally bonded reinforcementCAPORALE, A; LUCIANO, R.Composites. Part B, Engineering. 2012, Vol 43, Num 8, pp 3131-3145, issn 1359-8368, 15 p.Article

Material characterization of glass/polypropylene composite bone plates according to the forming condition and performance evaluation under a simulated human body environmentPARK, Seok-Won; YOO, Seong-Hwan; AN, Song-Tao et al.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 1101-1108, issn 1359-8368, 8 p.Article

Self-lubricating properties of PTFE/serpentine nanocomposite against steel at different loads and sliding velocitiesZHINING JIA; YULIN YANG.Composites. Part B, Engineering. 2012, Vol 43, Num 4, pp 2072-2078, issn 1359-8368, 7 p.Article

The simulation of tissue differentiation at a fracture gap using a mechano-regulation theory dealing with deviatoric strains in the presence of a composite bone plateKIM, Hyun-Jun; CHANG, Seung-Hwan; JUNG, Ho-Joong et al.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 978-987, issn 1359-8368, 10 p.Article

A phenomenological model for off-axis fatigue behavior of unidirectional polymer matrix composites under different stress ratiosKAWAI, M.Composites. Part A, Applied science and manufacturing. 2004, Vol 35, Num 7-8, pp 955-963, issn 1359-835X, 9 p.Conference Paper

Accelerated ageing behaviors of aluminum plate with composite patches under salt fog effectWEN, S. W; XIAO, J. Y; WANG, Y. R et al.Composites. Part B, Engineering. 2013, Vol 44, Num 1, pp 266-273, issn 1359-8368, 8 p.Article

Assessment of design procedures for the use of externally bonded FRP composites in shear strengthening of reinforced concrete beamsPELLEGRINO, Carlo; VASIC, Mira.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 727-741, issn 1359-8368, 15 p.Article

Thermal characterizations of the graphite nanosheets reinforced paraffin phase-change compositesCHEN, Yin-Ju; NGUYEN, Due-Dung; SHEN, Ming-Yuan et al.Composites. Part A, Applied science and manufacturing. 2013, Vol 44, pp 40-46, issn 1359-835X, 7 p.Article

A hybrid S-N formulation for fatigue life modeling of composite materials and structuresSARFARAZ, Roohollah; VASSILOPOULOS, Anastasios P; KELLER, Thomas et al.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 3, pp 445-453, issn 1359-835X, 9 p.Article

A study of fiber orientation in short fiber-reinforced composites with simultaneous mold filling and phase change effectsOUMER, Ahmed N; MAMAT, Othman.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 1087-1094, issn 1359-8368, 8 p.Article