kw.\*:("ACIER A508")
Results 1 to 24 of 24
Selection :
A NOVEL DESIGN FOR PWR PRESSURE VESSELS. = UNE NOUVELLE CONCEPTION POUR LES CUVES DE REACTEURS A EAU PRESSURISEEMARTIN A; WIDART J; SCAILTEUR A et al.1977; NUCLEAR ENGNG INTERN.; G.B.; DA. 1977; VOL. 22; NO 262; PP. 74-75; ANALYSE W.I.Article
THE USE OF CORROSION FATIGUE DATA IN THE ASSESSMENT OF CRACK GROWTH IN LARGE NUCLEAR PRESSURE VESSELSSCOTT PM.1978; TOLERANCE OF FLAWS IN PRESSURIZED COMPONENTS. CONFERENCE/1978/LONDRES; GBR; LONDON: I.M.E.; DA. 1978; PP. 77-86; BIBL. 20 REF.Conference Paper
Models for transformation plasticity in loaded steels subjected to bainitic and martensitic transformationLIU, C. C; YAO, K. F; XU, X. J et al.Materials science and technology. 2001, Vol 17, Num 8, pp 983-988, issn 0267-0836Article
Technical basis for a revised fatigue crack growth rate reference curve for ferritic steels in airEASON, E. D; GILMAN, J. D; JONES, D. P et al.Journal of pressure vessel technology. 1992, Vol 114, Num 1, pp 80-86, issn 0094-9930Conference Paper
Fracture mechanics evaluation of in-service inspection acceptance criteriaCAPURRO, E; REALE, S; TOGNARELLI, L et al.International journal of pressure vessels and piping. 1995, Vol 63, Num 1, pp 17-24, issn 0308-0161Article
Elastic-plastic fracture mechanics methodology using the modified J, JM, resistance curve approach = Méthodologie de la mécanique de rupture élastique plastique en utilisant l'approche de la courbe modifiée de résistance J, JMERNST, H. A; LANDES, J. D.Journal of pressure vessel technology. 1986, Vol 108, Num 1, pp 50-56, issn 0094-9930Article
Impurity effects in stress relief cracking of a Mn-Cr-Mo-Ni steel = Effets des impuretés sur la fissuration par relaxation des contraintes dans un acier Mn-Cr-Mo-NiSUN, J; ZAISS, R; MENYHARD, M et al.Materials science and technology. 1987, Vol 3, Num 2, pp 139-145, issn 0267-0836Article
Ductile fracture models and their potential in local approach of fracture = Modèle de rupture ductile et leurs potentiels dans l'approche locale de ruptureROUSSELIER, G.Nuclear engineering and design. 1987, Vol 105, Num 1, pp 97-111, issn 0029-5493Conference Paper
Influence of mean stress and frequency on the fatigue crack growth behaviour of A508 cl III steel in a low temperature pressurised water reactor environementBULLOCH, J. H.International journal of pressure vessels and piping. 1992, Vol 49, Num 2, pp 139-185, issn 0308-0161Article
Corrosion studies in the decontaminating processYANG, I.-J; LIN, M.-H; LIN, J.-C et al.Nuclear energy (1978). 1991, Vol 30, Num 3, pp 183-190, issn 0140-4067Article
Analysis of fracture toughness data in the brittle to ductile transition region for Creusot-Loire A508 class 3 forging used in a construction of PWR reactorsMOSKOVIC, R.Engineering fracture mechanics. 1995, Vol 50, Num 2, pp 175-202, issn 0013-7944Article
Effects of high temperature excursion on mechanical and fatigue properties of nuclear pressure vessel steel during fabricationBULLOCH, J. H.Theoretical and applied fracture mechanics. 1995, Vol 23, Num 1, pp 73-88, issn 0167-8442Article
Dynamic fracture mechanics under electromagnetic forceYAGAWA, G; YOSHIMURA, S; AKAHOSHI, Y et al.Fusion engineering and design. 1989, Vol 7, Num 3-4, pp 269-279, issn 0920-3796Article
Application of a local approach to ductile-brittle transition in a low-allowed steel = Application de l'approche locale à la transition ductile-fragile d'un acier faiblement alliéAMAR, E; PINEAU, A.Nuclear engineering and design. 1987, Vol 105, Num 1, pp 89-96, issn 0029-5493Conference Paper
Ductile fracture of a 508 Cl 3 steel in relation with inclusion content: the benefit of the local approach of fracture and continuum damage mechanics = Rupture ductile de l'acier 508 classe 3 en rapport avec la teneur des inclusions: le bénéfice de l'approche locale de rupture et de la mécanique de dommage des milieux continusBATISSE, R; BETHMONT, M; DEVESA, G et al.Nuclear engineering and design. 1987, Vol 105, Num 1, pp 113-120, issn 0029-5493Conference Paper
Perméation de l'hydrogène et de l'azote au travers du fer et des aciers : influence de la présence de couches minces superficielles = Permeation of hydrogen and nitrogen through iron and steels : influence of surface thin filmsAKKAD, Ahmed Nadim; TALBOT, Jean.1986, 128 pThesis
Microscopic examination of crack growth in a pressure vessel steelISACSSON, M; NARSTRÖM, T.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 1998, Vol 241, Num 1-2, pp 169-178, issn 0921-5093Article
Modeling of fatigue crack growth rate for ferritic steels in light water reactor environmentsEASON, E. D; NELSON, E. E; GILMAN, J. D et al.Nuclear engineering and design. 1998, Vol 184, Num 1, pp 89-111, issn 0029-5493Conference Paper
Cleavage behavior in structural steelsIRWIN, G. R; ZHANG, X. J.International journal of solids and structures. 1995, Vol 32, Num 17-18, pp 2447-2456, issn 0020-7683Conference Paper
A crack closure study to predict the threshold behaviour of small cracks = Etude de la fermeture de fissures pour la prévision du comportement seuil des petites fissuresJOURNET, B. G; LEFRANCOIS, A; PINEAU, A et al.Fatigue & fracture of engineering materials & structures (Print). 1989, Vol 12, Num 3, pp 237-246, issn 8756-758XArticle
Correlation between Charpy impact energy and J fracture toughness for thermally embrittled reactor pressure vessel steelTARPANI, J. R; SPINELLI, D.Materials science and technology. 2003, Vol 19, Num 10, pp 1435-1441, issn 0267-0836, 7 p.Article
Materials for nuclear power plants in Western CountriesTENCKHOFF, E; ERVE, M.Atw. Atomwirtschaft, Atomtechnik. 1992, Vol 37, Num 4, pp 185-192, issn 0365-8414Conference Paper
Thermal ageing effects in structural steels = Effets d'un vieillissement thermique dans les aciers de constructionHUDSON, J. A; DRUCE, S. G; GAGE, G et al.Theoretical and applied fracture mechanics. 1988, Vol 10, Num 2, pp 123-133, issn 0167-8442Article
Dynamic fracture toughness of LWR pressure vessel steel A508 Cl.3: a Japanese round-robin study = Ténacité à la rupture dynamique de l'acier A508 Cl3 pour récipient sous pression LWR: une table-ronde japonaiseNAKANO, Y; SAKAI, Y; YAGAWA, G et al.International journal of pressure vessels and piping. 1988, Vol 31, Num 4, pp 255-270, issn 0308-0161Article