Pascal and Francis Bibliographic Databases

Help

Search results

Your search

kw.\*:("Adición niquel")

Document Type [dt]

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Publication Year[py]

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Discipline (document) [di]

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Language

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Author Country

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Origin

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Results 1 to 25 of 381

  • Page / 16
Export

Selection :

  • and

Effects of Nickel Coating of Mold Plates on Star Crack DefectsOZTURK, Sabri; MERIH ARIKAN, Mustafa; KACAR, Yilmaz et al.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2013, Vol 44, Num 3, pp 706-710, issn 1073-5615, 5 p.Article

Predicting the Effect of Mo, Ni, and Si on the Bainitic StasisHAO CHEN; VAN DER ZWAAG, Sybrand.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 8, pp 3429-3437, issn 1073-5623, 9 p.Article

Effect of mechanical coating with Ni and Ni-5% Al on the structure and electrochemical properties of the Mg-50% Ni alloyFERREIRA SANTOS, Sydney; DE CASTRO, José Fernando R; ISHIKAWA, Tomaz T et al.Journal of materials science. 2008, Vol 43, Num 8, pp 2889-2894, issn 0022-2461, 6 p.Article

The Effects of Nickel/Tin Ratio on Cu Induced Surface Hot Shortness in FeLAN YIN; SAMPSON, Erica; NAKANO, Jinichiro et al.Oxidation of metals. 2011, Vol 76, Num 5-6, pp 367-383, issn 0030-770X, 17 p.Article

Characterization of Nickel Diffusion and its Effect on the Microstructure of Nickel PM SteelsTOUGAS, Bernard; BLAIS, Carl; CHAGNON, François et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2013, Vol 44, Num 2, pp 754-765, issn 1073-5623, 12 p.Article

Electrochemical studies on the effect of nickel on copper anode passivation in a copper sulphate solutionJARJOURA, G; KIPOUROS, G. J.Canadian metallurgical quarterly. 2006, Vol 45, Num 3, pp 283-293, issn 0008-4433, 11 p.Article

Effect of Mn/Ni ratio variation on microstructure of W-Ni-Mn alloyZAHRAEE, S. M; ARABI, H; SALEHI, M. T et al.Powder metallurgy. 2008, Vol 51, Num 4, pp 303-309, issn 0032-5899, 7 p.Article

The removal of an Ni-activator from the Ni-activated sintered W-compact by high vacuum treatmentIN-HYUNG MOON; YOUNG-HWAN KIM; MYUNG-JIN SUK et al.Journal of the less-common metals. 1991, Vol 170, Num 1, pp 15-25, issn 0022-5088Article

Effect of nickel base superalloy composition on oxidation resistance in SO2 containing, high pO2 environmentsJALOWICKA, A; NOWAK, W; NAUMENKO, D et al.Materials and corrosion (1995). 2014, Vol 65, Num 2, pp 178-187, issn 0947-5117, 10 p.Article

The third-element effect in the oxidation of Ni-xCr-7Al (x = 0, 5, 10, 15 at.%) alloys in 1 atm O2 at 900-1000 °CNIU, Y; ZHANG, X. J; WU, Y et al.Corrosion science. 2006, Vol 48, Num 12, pp 4020-4036, issn 0010-938X, 17 p.Article

The Effect of Minor Addition of Ni on the Microstructural Evolution and Mechanical Properties of Suction Cast Al-0.14 at. pct Sc Binary AlloyNANDI, Proloy; SUWAS, Satyam; KUMAR, Subodh et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2013, Vol 44, Num 6, pp 2591-2603, issn 1073-5623, 13 p.Article

The effect of a nickel alloy coating on the corrosion of furnace wall tubes in a waste wood fired power plantALIPOUR, Y; HENDERSON, P; SZAKALOS, P et al.Materials and corrosion (1995). 2014, Vol 65, Num 2, pp 217-225, issn 0947-5117, 9 p.Article

Influence of nickel boride additions on sintering behaviors of injection moulded 17-4 PH stainless steel powderGÜLSOY, H. Özkan.Scripta materialia. 2005, Vol 52, Num 3, pp 187-192, issn 1359-6462, 6 p.Article

Electrical resistance measurement in the activated sintering process of the nickel-doped tungsten-powder compact = Mesure de la résistance électrique dans le processus de frittage activé d'un compact de poudre de tungstène dopée avec du nickelIN-HYUNG MOON; IN-SUP AHN; KYO-WOOK AHN et al.Journal of the less-common metals. 1986, Vol 123, pp 241-250, issn 0022-5088Article

The Effects of Ni-Plating and Prolonged High Temperature Oxidation at 1423 K (1150 °C) on a CMSX-10 Single-Crystal Ni-Based Super-Alloy and Coating SystemCLANCY, Marie; POMEROY, Michael J.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2013, Vol 44, Num 7, pp 3028-3045, issn 1073-5623, 18 p.Article

Mechano-chemical synthesis of manganese borohydride (Mn(BH4)2) and inverse cubic spinel (Li2MnGl4) in the (nLiBH4 + MnGl2) (n = 1, 2, 3, 5, 9 and 23) mixtures and their dehydrogenation behaviorVAGIN, R. A; ZBRONIEC, L; POLANSKI, M et al.International journal of hydrogen energy. 2012, Vol 37, Num 21, pp 16056-16069, issn 0360-3199, 14 p.Article

The effect of iron precipitation upon nickel losses from synthetic atmospheric nickel laterite leach solutions: Statistical analysis and modellingWANG, K; LI, J; MCDONALD, R. G et al.Hydrometallurgy (Amsterdam). 2011, Vol 109, Num 1-2, pp 140-152, issn 0304-386X, 13 p.Article

Effect of Ni content on the reaction behaviors of self-propagating high-temperature synthesis in the Ni-Ti-B4C systemYANG, Y. F; WANG, H. Y; ZHAO, R. Y et al.International journal of refractory metals & hard materials. 2008, Vol 26, Num 2, pp 77-83, issn 0958-0611, 7 p.Article

A rheological assessment of the effect of trace level Ni additions on the solidification of Sn-0.7CuGOURLAY, C. M; NOGITA, K; MCDONALD, S. D et al.Scripta materialia. 2006, Vol 54, Num 9, pp 1557-1562, issn 1359-6462, 6 p.Article

Response of some cast zinc-base alloys (37.5% Al) comprised of nickel/silicon under different tensile loading conditionsPRASAD, B. K.Journal of materials engineering and performance. 1998, Vol 7, Num 5, pp 632-636, issn 1059-9495Article

The influence of various major and minor alloying elements on the corrosion of an Fe-40%Cr superferritic stainless steel in sulphuric acidPOTGIETER, J. H; VARGA, K.Werkstoffe und Korrosion. 1997, Vol 48, Num 4, pp 221-227, issn 0043-2822Article

Preliminary irradiation test results from the Yankee Atomic Electric Company reactor vessel test irradiation programBIEMILLER, E. C; FYFITCH, S; CAMPBELL, C. A et al.International journal of pressure vessels and piping. 1994, Vol 60, Num 3, pp 259-269, issn 0308-0161Article

Laser alloying of the surface of parts of siluminsGRECHIN, A. N; SHLYAPINA, I. R; NABUTOVSKII, L. SH et al.Metal science and heat treatment. 1991, Vol 33, Num 3-4, pp 189-192, issn 0026-0673Article

Optimization of chemical composition of five-component aluminium bronze for the production of ship's propellers. II, Multi-criterion optimizationWYSIECKI, M; LABUC, L.International journal of materials & product technology. 1990, Vol 5, Num 4, pp 339-348, issn 0268-1900Article

Vliv legování na tranzitní chování ocelí na odlitky = Effet de l'alliage sur la tenue de transition des aciers de moulage = Effect of alloying on the transient behaviour of steels for castingsZEMAN, J; PECHMAN, V; ROLC, S et al.Slévárenství. 1988, Vol 36, Num 7, pp 276-280, issn 0037-6825Article

  • Page / 16