Isothermic cuts of the System Nb-Ti-Al at 1200-600⁰CZAKHAROV, A.M; KARSANOV, G.V; TROITSKIJ, B.S et al.Izvestiâ Akademii nauk SSSR. Metally. 1984, Vol 1984, Num 1, pp 200-202, issn 0568-5303Article

OXIDATION BEHAVIOR OF THE ALIGNED LAMELLAR EUTECTIC ALLOY NI₃AL-NI₃NBSMEGGIL JG; MCCONNELL MD.1974; OXIDAT. OF METALS; U.S.A.; DA. 1974; VOL. 8; NO 5; PP. 309-341; BIBL. 17 REF.Article

Transformation of BCC and B2 high temperature phases of HCP and orthorhombic structures in the Ti-Al-Nb system. II: Experimental TEM study of microstructuresBENDERSKY, L. A; BOETTINGER, W. J.Journal of research of the National Institute of Standards and Technology. 1993, Vol 98, Num 5, pp 585-606, issn 1044-677XArticle

The Al-B-Nb-Ti system IV. Experimental study and thermodynamic re-evaluation of the binary Al-Nb and ternary Al-Nb-Ti systemsWITUSIEWICZ, V. T; BONDAR, A. A; HECHT, U et al.Journal of alloys and compounds. 2009, Vol 472, Num 1-2, pp 133-161, issn 0925-8388, 29 p.Article

Transformation of BCC and B2 high temperature phases to HCP and orthorhombic structures in the Ti-Al-Nb system. I: Microstructural predictions based on a subgroup relation between phasesBENDERSKY, L. A; ROYTBURD, A; BOETTINGER, W. J et al.Journal of research of the National Institute of Standards and Technology. 1993, Vol 98, Num 5, pp 561-583, issn 1044-677XArticle

Phase transformations in Nb-Al-Ti alloysMENON, E. S. K; SUBRAMANIAN, P. R; DIMIDUK, D. M et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 1996, Vol 27, Num 6, pp 1647-1660, issn 1073-5623, 13 p.Conference Paper

Microstructure controlling by heat treatment and complex processing for Ti₂AlNb based alloysJIHUA PENG; YONG MAO; SHIQIONG LI et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2001, Vol 299, Num 1-2, pp 75-80, issn 0921-5093Article

THE ORIENTATION AND TEMPERATURE DEPENDENCE OF THE YIELD STRESS OF NI₃(AL, NB) SINGLE CRYSTALS = EFFET DE L'ORIENTATION ET DE LA LIMITE D'ELASTICITE DES MONOCRISTAUX NI₃(AL, NB)LALL C; CHIN S; POPE DP et al.1979; METALL. TRANS. A; ISSN 0360-2133; USA; DA. 1979; VOL. 10; NO 9; PP. 1323-1332; BIBL. 23 REF.Article

FRACTURE BY DYNAMIC BENDING OF THE EUTECTIC NI₃AL-NI₃NB IN THE DIRECTIONAL SOLIDIFICATIONNESTEROVITCH LN; GAZOV VI; KUPCHENKO GV et al.1978; VESCI AKAD. NAVUK BSSR, FIZ.-TEKH. NAVUK; BYS; DA. 1978; NO 4; PP. 52-56; BIBL. 5 REF.Article

Enthalpies of formation of the Al-Nb intermetallic compoundsMAHDOUK, K; GACHON, J.-C; BOUIRDEN, L et al.Journal of alloys and compounds. 1998, Vol 268, pp 118-121, issn 0925-8388Article

Preparation and characterization of nanocrystalline Nb₃Al alloyWU, Chuan-Yi; LIN, Hong-Ming; LIN, Hsin-Fu et al.Scripta materialia. 2001, Vol 44, Num 8-9, pp 1967-1971, issn 1359-6462Conference Paper

Upper critical magnetic field for a modified multifilamental Nb₃Al wireMAO, D; ITOH, K; KURODA, T et al.Journal of superconductivity. 1997, Vol 10, Num 5, pp 537-540, issn 0896-1107Article

First results of strain effects of I_c of Nb₃Al cable in conduit fusion superconductorsSPECKING, W; KIESEL, H; NAKAJIMA, H et al.IEEE transactions on applied superconductivity. 1993, Vol 3, Num 1, pp 1342-1345, issn 1051-8223, 3Conference Paper

Enhanced current capacity of jelly-roll processed and transformed Nb₃Al multifilamentary conductorsTAKEUCHI, T; TAGAWA, K; IWAKI, G et al.IEEE transactions on applied superconductivity. 1999, Vol 9, Num 2, pp 2682-2687, issn 1051-8223, 2Conference Paper

Process development and microstructures of Nb₃Al precursor strand for reel-to-reel productionGREGORY, E; TOMSIC, M; BUTA, F et al.IEEE transactions on applied superconductivity. 1999, Vol 9, Num 2, pp 2692-2695, issn 1051-8223, 2Conference Paper

Nb₃Al thin films made by RF magnetron sputtering process with a single targetAGATSUMA, K; TATEISHI, H; ARAI, K et al.IEEE transactions on applied superconductivity. 1997, Vol 7, Num 2, pp 1580-1583, issn 1051-8223, 2Conference Paper

The α₂-to-O transformation in Ti-Al-Nb alloysMURALEEDHARAN, K; BANERJEE, D; BANERJEE, S et al.Philosophical magazine. A. Physics of condensed matter. Defects and mechanical properties. 1995, Vol 71, Num 5, pp 1011-1036, issn 0141-8610Article

A study of oxidized Nb-Al alloys using Auger electron spectroscopy and photoemission spectroscopy = Etude d'alliages Nb-Al oxydés par spectroscopie d'électrons Auger et spectroscopie de photoémissionOSHIMA, M; PATE, B. B.Journal of vacuum science and technology. A. Vacuum, surfaces, and films. 1985, Vol 3, Num 5, pp 1982-1987, issn 0734-2101Article

Oxidation behavior of Ti₃Al alloyed with niobium and siliconGUOHUA HIU; JIANSHENG WU; LANTING ZHANG et al.Scripta metallurgica et materialia. 1995, Vol 33, Num 2, pp 213-217, issn 0956-716XArticle

Optical spectroscopy of lanthanide ions in Al₂O₃-Nb₂O₅-TeO₂ glassesZAMBELLI, Marta; SPEGHINI, Adolfo; INGLETTO, Gianluigi et al.Optical materials (Amsterdam). 2004, Vol 25, Num 2, pp 215-222, issn 0925-3467, 8 p.Conference Paper

The decomposition of the beta phase in Ti-44Al-8Nb and Ti-44Al-4Nb-4Zr-0.2Si alloysCHENG, T. T; LORETTO, M. H.Acta materialia. 1998, Vol 46, Num 13, pp 4801-4819, issn 1359-6454Article

Sulfur segregation in titanium and selected titanium alloysOUTLAW, R. A; LEE, W. S; HOEKJE, S. J et al.Applied surface science. 1994, Vol 81, Num 2, pp 143-150, issn 0169-4332Article

Fracture toughness of the eutectic alloy Al₃Nb-Nb₂AlTRIVENO RIOS, C; FERRANDINI, P; CARAM, R et al.Materials letters (General ed.). 2003, Vol 57, Num 24-25, pp 3949-3953, issn 0167-577X, 5 p.Article

The strain and temperature scaling law for the critical current density of a jelly-roll Nb₃Al strand in high magnetic fieldsKEYS, Simon A; KOIZUMI, Norikiyo; HAMPSHIRE, Damian P et al.Superconductor science & technology (Print). 2002, Vol 15, Num 7, pp 991-1010, issn 0953-2048Article

Effect of rapid heating, quenching and transformation conditions on the superconducting properties and microstructure of Jelly-Roll processed Nb₃Al superconductorsFUKUZAKI, T; TAKEUCHI, T; BANNO, N et al.Superconductor science & technology (Print). 2002, Vol 15, Num 10, pp 1404-1409, issn 0953-2048, 6 p.Article