kw.\*:("Aluminiumnitrid")
Results 1 to 25 of 361
Selection :
Fabrication of Al-3.7 Pct SiC-0.18 Pct Mg Foam Strengthened by AIN Particle Dispersion and its Compressive PropertiesYEONG HWAN SONG; TANE, Masakazu; IDE, Takuya et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2010, Vol 41, Num 8, pp 2104-2111, issn 1073-5623, 8 p.Article
The formation of AIN crystals in an Fe-Mn-Al-C alloy during the nitriding processJAW, Jyh-Hong; CHENG, Wei-Chun; WANG, Chaur-Jeng et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2005, Vol 36, Num 9, pp 2289-2296, issn 1073-5623, 8 p.Article
Investigation of phase equilibra related to fusion reactor materials. Pt. 1:The ternary system Zr-Al-N = Untersuchung der Phasengleichgewichte hinsichtlich der Fusionsreaktorwerkstoffe. T. 1SCHUSTER, J.C; BAUER, J; DEBUIGNE, J et al.Journal of nuclear materials. 1983, Vol 116, Num 2/3, pp 131-135, issn 0022-3115Article
In-situ formation of AlN/Al compositeOYA-SEIMIYA, Yoshihiro; ONODERA, Keiji; YAMAGUCHI, Toshihisa et al.Keikinzoku. 2007, Vol 57, Num 9, pp 405-410, issn 0451-5994, 6 p.Article
Oxidation Kinetics of AIN Under CO2 AtmospherePENG LI; LIDONG TENG; MIN GUO et al.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2012, Vol 43, Num 2, pp 406-412, issn 1073-5615, 7 p.Article
Stabilization of aluminum dross by using hydrothermal reactionHISAYUKI, Koji; ATSUTA, Yoichi; DAIMON, Hiroyuki et al.Keikinzoku. 2009, Vol 59, Num 11, pp 627-631, issn 0451-5994, 5 p.Article
Thermodynamics of aluminum, nitrogen and AIN formation in liquid ironKIM, Wan-Yi; KANG, Jin-Goo; PARK, Chui-Hwan et al.ISIJ international. 2007, Vol 47, Num 7, pp 945-954, issn 0915-1559, 10 p.Article
Process structure properties relationship during formation of CrN and AlN layers on H13 SteelROJO, A; OSEGUERA, J; SALAS, O et al.Surface & coatings technology. 2008, Vol 203, Num 3-4, pp 217-222, issn 0257-8972, 6 p.Article
Thickness-dependent structural transformation in the A1N filmCHEN, D; MA, X. L; WANG, Y. M et al.Acta materialia. 2005, Vol 53, Num 19, pp 5223-5227, issn 1359-6454, 5 p.Article
Thermodynamics and Kinetics to Alloying Addition on In-Situ AIN/Mg Composites Synthesis via Displacement Reactions in Liquid Mg MeltTONGXIANG FAN; CONGFA ZHANG; JIANQI CHEN et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2009, Vol 40, Num 11, pp 2743-2750, issn 1073-5623, 8 p.Article
Influence of bias voltage on properties of AlCrN coatings prepared by cathodic arc depositionLOMELLO, F; SANCHETTE, F; SCHUSTER, F et al.Surface & coatings technology. 2013, Vol 224, pp 77-81, issn 0257-8972, 5 p.Article
Anisotropy effects on microstructure and properties in decomposed arc evaporated Ti1-xAlxN coatings during metal cuttingJOESAAR, M. P. Johansson; NORRBY, N; ULLBRAND, J et al.Surface & coatings technology. 2013, Vol 235, pp 181-185, issn 0257-8972, 5 p.Article
Einfluss von Aluminiumnitrid auf die Hochtemperaturduktilität von stranggegossenen Brammen = Influence of Aluminium Nitride on the High-Temperature Ductility of Continuous Cast SlabsWINKELHOFER, Florian; PARTEDER, Erik; CLEMENS, Helmut et al.Praktische Metallographie. 2008, Vol 45, Num 4, pp 159-172, issn 0032-678X, 14 p.Article
Sequential growths of AIN and GaN layers on as-polished 6H-SiC(0001) substratesREITMEIER, Z. J; EINFELDT, S; DAVIS, F et al.Acta materialia. 2009, Vol 57, Num 14, pp 4001-4008, issn 1359-6454, 8 p.Article
Influence of residual stress on mechanical properties of TiAlN thin filmsCHENG, Guo-An; HAN, Dong-Yan; LIANG, Chang-Lin et al.Surface & coatings technology. 2013, Vol 228, issn 0257-8972, S328-S330, SUP1Conference Paper
A comparative study on Ti1-xAlxN coatings reactively sputtered from compound and from mosaic targetsSCHALK, N; WEIRATHER, T; POLZER, C et al.Surface & coatings technology. 2011, Vol 205, Num 19, pp 4705-4710, issn 0257-8972, 6 p.Article
Microstructural evolution during pressureless infiltration of aluminium alloy parts fabricated by selective laser sinteringPENG YU; SCHAFFER, G. B.Acta materialia. 2009, Vol 57, Num 1, pp 163-170, issn 1359-6454, 8 p.Article
Two-step reactive sputtering of piezoelectric AlN thin filmsCHERNG, J. S; LIN, C. M; CHEN, T. Y et al.Surface & coatings technology. 2008, Vol 202, Num 22-23, pp 5684-5687, issn 0257-8972, 4 p.Conference Paper
Process monitoring during AlN deposition by reactive magnetron sputteringACOSTA, J; ROJO, A; SALAS, O et al.Surface & coatings technology. 2007, Vol 201, Num 18, pp 7992-7999, issn 0257-8972, 8 p.Article
An investigation of improved titanium/titanium nitride barriers for submicron aluminum-filled contacts by energy-filtered transmission electron microscopyRUCKI, Andreas; ROBL, Wemer.International journal of materials research. 2006, Vol 97, Num 7, pp 1037-1040, issn 1862-5282, 4 p.Article
Fractional glow technique spectroscopy of traps in heavily doped AlN:O = Fraktionierte Glimmtechnik-Spektroskopie von Einfangstellen in stark dotiertem AlN(O)TALE, I; ROSA, J.Physica status solidi. A. Applied research. 1984, Vol 86, Num 1, pp 319-326, issn 0031-8965Article
Determination of aluminium and silicon nitrides in transformer steelsLEV, I.E; LAZAREV, B.G; MITSKEVICH, N.S et al.Zavodskaâ laboratoriâ. 1983, Vol 49, Num 9, pp 19-22, issn 0321-4265Article
Growth of polycrystalline indium aluminum nitride thin films on silicon (111) substratesAFZAL, Naveed; DEVARAJAN, Mutharasu; IBRAHIM, Kamarulazizi et al.Materials science in semiconductor processing. 2014, Vol 27, pp 975-984, issn 1369-8001, 10 p.Article
Microstructure and Mechanical Properties of AIN/Cu Brazed JointsSU, Cherng-Yuh; PAN, C. T; LO, Min-Sheng et al.Journal of materials engineering and performance. 2014, Vol 23, Num 9, pp 3299-3304, issn 1059-9495, 6 p.Article
Thermal stability and oxidation resistance of arc evaporated TiAlN, TaAlN, TiAlTaN, and TiAlN/TaAlN coatingsKOLLER, C. M; HOLLERWEGER, R; SABITZER, C et al.Surface & coatings technology. 2014, Vol 259, pp 599-607, issn 0257-8972, 9 p., cArticle