kw.\*:("B. Porosity")
Results 1 to 25 of 87
Selection :
Modelling the effect of material properties and process parameters on tow impregnation in out-of-autoclave prepregsCENTEA, T; HUBERT, P.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 9, pp 1505-1513, issn 1359-835X, 9 p.Article
Physico-chemical characterization of thermally treated bentoniteZIVICA, Vladimir; PALOU, Martin T.Composites. Part B, Engineering. 2014, Vol 68, pp 436-445, issn 1359-8368, 10 p.Article
Thermoplastic polymer impregnation of cellulose nanofibre networks: Morphology, mechanical and optical propertiesJONOOBI, Mehdi; AITOMÄKI, Yvonne; MATHEW, Aji P et al.Composites. Part A, Applied science and manufacturing. 2014, Vol 58, pp 30-35, issn 1359-835X, 6 p.Article
A non-local void filling model to describe its dynamics during processing thermoplastic compositesSIMACEK, Pavel; ADVANI, Suresh G; GRUBER, Mark et al.Composites. Part A, Applied science and manufacturing. 2013, Vol 46, pp 154-165, issn 1359-835X, 12 p.Article
Compressive properties of closed-cell polyvinyl chloride foams at low and high strain rates: Experimental investigation and critical review of state of the artLUONG, Dung D; PINISETTY, Dinesh; GUPTA, Nikhil et al.Composites. Part B, Engineering. 2013, Vol 44, Num 1, pp 403-416, issn 1359-8368, 14 p.Article
Cure behaviour and void development within rapidly cured out-of-autoclave compositesAGIUS, S. L; MAGNIEZ, K. J. C; FOX, B. L et al.Composites. Part B, Engineering. 2013, Vol 47, pp 230-237, issn 1359-8368, 8 p.Article
The effects of antifreeze use on physical and mechanical properties of concrete produced in cold weatherCULLU, Mustafa; ARSLAN, Metin.Composites. Part B, Engineering. 2013, Vol 50, pp 202-209, issn 1359-8368, 8 p.Article
Preparation and characterization of polycaprolactone/forsterite nanocomposite porous scaffolds designed for bone tissue regenerationDIBA, M; KHARAZIHA, M; FATHI, M. H et al.Composites science and technology. 2012, Vol 72, Num 6, pp 716-723, issn 0266-3538, 8 p.Article
Mechanical properties of porous combustion synthesized Ni3Ti-TiCx compositesBURKES, Douglas E; GOTTOLI, Guglielmo; MOORE, John J et al.Composites science and technology. 2006, Vol 66, Num 13, pp 1931-1940, issn 0266-3538, 10 p.Article
Micro-mechanical modeling the densification behavior of titanium metal matrix compositesKIM, T.-W; LEE, C. H.Composites. Part A, Applied science and manufacturing. 2004, Vol 35, Num 12, pp 1375-1383, issn 1359-835X, 9 p.Article
Impact-induced deformation fields in 3D cellular woven compositesBAHEI-EL-DIN, Y. A; ZIKRY, M. A; RAJENDRAN, A. M et al.Composites. Part A, Applied science and manufacturing. 2003, Vol 34, Num 8, pp 765-778, issn 1359-835X, 14 p.Article
Investigation of shearing effects on the permeability of woven fabrics and implementation into LCM simulationLOUIS, Markus; HUBER, Ulrich.Composites science and technology. 2003, Vol 63, Num 14, pp 2081-2088, issn 0266-3538, 8 p.Article
Numerical simulation of void formation in LCMBREARD, Joël; SAOUAB, Abdelghani; BOUQUET, Guy et al.Composites. Part A, Applied science and manufacturing. 2003, Vol 34, Num 6, pp 517-523, issn 1359-835X, 7 p.Conference Paper
Novel aligned hemp fibre reinforcement for structural biocomposites: Porosity, water absorption, mechanical performances and viscoelastic behaviourBAGHAEI, Behnaz; SKRIFVARS, Mikael; SALEHI, Masoud et al.Composites. Part A, Applied science and manufacturing. 2014, Vol 61, pp 1-12, issn 1359-835X, 12 p.Article
Synthesis and characterization of CaP/Col composite scaffolds for load-bearing bone tissue engineeringZHOU, C. C; YE, X. J; FAN, Y. J et al.Composites. Part B, Engineering. 2014, Vol 62, pp 242-248, issn 1359-8368, 7 p.Article
Synthesis and electrochemical performance of a simple and low-cost, sulfur/porous carbon composite cathode for rechargeable lithium sulfur batteryLI, Long-Yan; CHEN, Yan-Xiao; ZHONG, Ben-He et al.Composites. Part A, Applied science and manufacturing. 2014, Vol 62, pp 26-31, issn 1359-835X, 6 p.Article
Mechanical and microstructural behavior of nanocomposites produced via cold sprayCAVALIERE, P; PERRONE, A; SILVELLO, A et al.Composites. Part B, Engineering. 2014, Vol 67, pp 326-331, issn 1359-8368, 6 p.Article
Accelerated carbonation effect on behaviour of ternary Portland cementsFRIAS, Moises; GONI, Sara.Composites. Part B, Engineering. 2013, Vol 48, pp 122-128, issn 1359-8368, 7 p.Article
Influence of the hard coated B4C particulates on wear resistance of Al-Cu alloysMAZAHERY, Ali; MOHSEN OSTAD SHABANI.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 1302-1308, issn 1359-8368, 7 p.Article
Comparison of tensile and compressive characteristics of vinyl ester/glass microballoon syntactic foamsGUPTA, Nikhil; YE, Raymond; PORFIRI, Maurizio et al.Composites. Part B, Engineering. 2010, Vol 41, Num 3, pp 236-245, issn 1359-8368, 10 p.Article
Preparation and thermal properties of paraffin/porous silica ceramic compositeZHOU XIANGFA; XIAO HANNING; FENG JIAN et al.Composites science and technology. 2009, Vol 69, Num 7-8, pp 1246-1249, issn 0266-3538, 4 p.Article
Ceramic foam-reinforced Al-based micro-compositesVAUCHER, S; KUEBLER, J; BEFFORT, O et al.Composites science and technology. 2008, Vol 68, Num 15-16, pp 3202-3207, issn 0266-3538, 6 p.Article
Microcellular ceramics by using silicone preceramic polymer and PMMA polymer sacrificial microbeadsSHIBUYA, Masachika; TAKAHASHI, Tatsuhiro; KOYAMA, Kiyohito et al.Composites science and technology. 2007, Vol 67, Num 1, pp 119-124, issn 0266-3538, 6 p.Article
Stochastic modeling of preform heterogeneity to address dry spots formation in the VARTM processMARKICEVIC, B; HEIDER, D; ADVANI, S. G et al.Composites. Part A, Applied science and manufacturing. 2005, Vol 36, Num 6, pp 851-858, issn 1359-835X, 8 p.Article
Mechanical characteristics and strengthening effectiveness of random-chopped FRP composites containing air voidsYANG, B. J; HA, S. K; PYO, S. H et al.Composites. Part B, Engineering. 2014, Vol 62, pp 159-166, issn 1359-8368, 8 p.Article