Optimization of runner sizes and process conditions considering both part quality and manufacturing cost in injecting moldingZHAI, Ming; CHANGYU SHEN; CHUNTAI LIU et al.Journal of polymer engineering. 2011, Vol 31, Num 6-7, pp 489-494, issn 0334-6447, 6 p.Article

Modeling and simulation of the viscoelastic fluid mold filling process by level set methodBINXIN YANG; JIE OUYANG; QIANG LI et al.Journal of non-newtonian fluid mechanics. 2010, Vol 165, Num 19-20, pp 1275-1293, issn 0377-0257, 19 p.Article

Crystallization behavior and nucleation analysis of isotactic polypropylene with a multiamide nucleating agentTING XU; YAMING WANG; YANMEI XU et al.Polymer testing. 2014, Vol 36, pp 62-68, issn 0142-9418, 7 p.Article

Preparation and Characterization of a Bipolar Membrane Modified by Copper Phthalocyanine 16-Carboxylic Acid and Acetyl FerroceneSUYU SHI; YAMIN PAN; BO LU et al.Journal of macromolecular science. Physics. 2014, Vol 53, Num 7-9, pp 1431-1441, issn 0022-2348, 11 p.Article

Crystallization kinetics and morphology of partially melted poly(lactic acid)YANMEI XU; YAMING WANG; TING XU et al.Polymer testing. 2014, Vol 37, pp 179-185, issn 0142-9418, 7 p.Article

The strain-sensing behaviors of carbon black/polypropylene and carbon nanotubes/polypropylene conductive composites prepared by the vacuum-assisted hot compressionYINGYING QU; KUN DAI; JUNHUI ZHAO et al.Colloid and polymer science (Print). 2014, Vol 292, Num 4, pp 945-951, issn 0303-402X, 7 p.Article

Organic vapor sensing behaviors of carbon black/poly (lactic acid) conductive biopolymer compositeKE LI; KUN DAI; XIANGBIN XU et al.Colloid and polymer science (Print). 2013, Vol 291, Num 12, pp 2871-2878, issn 0303-402X, 8 p.Article

Thermal degradation mechanism and kinetics of polycarbonate/silica nanocompositesYUEZHAN FENG; BO WANG; FANGFANG WANG et al.Polymer degradation and stability. 2014, Vol 107, pp 129-138, issn 0141-3910, 10 p.Article

Unexpected molecular weight dependence of shish kebab in water-assisted injection molded HDPEXIANHU LIU; CHANGYAN ZHANG; KUN DAI et al.Polymers for advanced technologies. 2013, Vol 24, Num 2, pp 270-272, issn 1042-7147, 3 p.Article

Transcrystallinity in a Polycarbonate(PC)/Polyethylene(PE) Blend Prepared by Gas-Assisted Injection Molding : A New Understanding of Its Formation MechanismGUOQIANG ZHENG; WEI YANG; CHUNTAI LIU et al.Journal of macromolecular science. Physics. 2008, Vol 47, Num 5, pp 829-836, issn 0022-2348, 8 p.Article

Morphology of gas-assisted and conventional injection molded polycarbonate/polyethylene blendGUOQIANG ZHENG; WEI YANG; BO YIN et al.Journal of applied polymer science. 2006, Vol 102, Num 3, pp 3069-3077, issn 0021-8995, 9 p.Article

Realizing the simultaneously improved toughness and strength of ultra-thin LLDPE parts through annealingSUYU SHI; YAMIN PAN; BO LU et al.Polymer (Guildford). 2013, Vol 54, Num 25, pp 6843-6852, issn 0032-3861, 10 p.Article

Tuning of liquid sensing performance of conductive carbon black (CB)/polypropylene (PP) composite utilizing a segregated structureKUN DAI; SHUAIGUO ZHAO; WEI ZHAI et al.Composites. Part A, Applied science and manufacturing. 2013, Vol 55, pp 11-18, issn 1359-835X, 8 p.Article

Electrospun isotactic polypropylene fibers: Self-similar morphology and microstructureSHUANGYANG LIU; YANYAN LIANG; YABO QUAN et al.Polymer (Guildford). 2013, Vol 54, Num 12, pp 3117-3123, issn 0032-3861, 7 p.Article

β-Crystal in injection moulded poly(ethylene terephthalate) fibre/isotactic polypropylene compositeCAIQIAO JI; MANCUN XIE; BAOBAO CHANG et al.Composites. Part A, Applied science and manufacturing. 2013, Vol 46, pp 26-33, issn 1359-835X, 8 p.Article

Analysis of Polystyrene Surface Properties on Thin Film Bonding Under Carbon Dioxide Pressure Using Nanoparticle Embedding TechniqueJINTAO YANG; CHUNTAI LIU; YONG YANG et al.Journal of polymer science. Part B. Polymer physics. 2009, Vol 47, Num 16, pp 1535-1542, issn 0887-6266, 8 p.Article

Study on Impact Property and Fracture Morphology of Injection-molded Optical-grade PolycarbonateFANGFANG WANG; BO WANG; CHUNTAI LIU et al.Journal of macromolecular science. Physics. 2014, Vol 53, Num 1-3, pp 336-346, issn 0022-2348, 11 p.Article

Effect of Stretching on β-Phase Content of Isotactic Polypropylene Melt Containing β-Nucleating AgentSONGWEI LI; GUOQIANG ZHENG; ZHENHUA JIA et al.Journal of macromolecular science. Physics. 2012, Vol 51, Num 4-6, pp 828-838, issn 0022-2348, 11 p.Article

Temperature-resistivity characteristics of a segregated conductive CB/PP/UHMWPE compositeYUE WEI; ZEYU LI; XIANHU LIU et al.Colloid and polymer science (Print). 2014, Vol 292, Num 11, pp 2891-2898, issn 0303-402X, 8 p.Article

A comparison between strain sensing behaviors of carbon black/polypropylene and carbon nanotubes/polypropylene electrically conductive compositesJUNHUI ZHAO; KUN DAI; CHENGGANG LIU et al.Composites. Part A, Applied science and manufacturing. 2013, Vol 48, pp 129-136, issn 1359-835X, 8 p.Article

Enhanced β-Crystal Formation of Isotactic Polypropylene Under the Combined Effects of Acid-Corroded Glass Fiber and PreshearMANCUN XIE; BAOBAO CHANG; HONGLI LIU et al.Polymer composites. 2013, Vol 34, Num 8, pp 1250-1260, issn 0272-8397, 11 p.Article

Negative effect of stretching on the development of β-phase in β-nucleated isotactic polypropyleneGUOQIANG ZHENG; SONGWEI LI; XIAOLI ZHANG et al.Polymer international. 2011, Vol 60, Num 7, pp 1016-1023, issn 0959-8103, 8 p.Article

HDPE solution crystallization induced by electrospun PA66 nanofiberWENJUAN HAN; GUOQIANG ZHENG; QIAN LI et al.Colloid and polymer science (Print). 2011, Vol 289, Num 7, pp 843-848, issn 0303-402X, 6 p.Article

Transcrystallization in nanofiber bundle/isotactic polypropylene composites: effect of matrix molecular weightYANYAN LIANG; SHUANGYANG LIU; CHANGYU SHEN et al.Colloid and polymer science (Print). 2012, Vol 290, Num 12, pp 1157-1164, issn 0303-402X, 8 p.Article