Formation of boride layers at the Fe-25% Cr alloy-boron interfaceDYBKOV, V. I; LENGAUER, W; GAS, P et al.Journal of materials science. 2006, Vol 41, Num 15, pp 4948-4960, issn 0022-2461, 13 p.Article

Aluminum deoxidation equilibrium in liquid Fe-16 pct Cr alloyLEE, Sang-Beom; CHOI, Ju-Han; JUNG, Sung-Mo et al.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2005, Vol 36, Num 3, pp 414-416, issn 1073-5615, 3 p.Article

Comparison of Crevice Corrosion of Fe-Based Amorphous Metal and Crystalline Ni-Cr-Mo AlloySHAN, X; HA, H; PAYER, J. H et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2009, Vol 40, Num 6, pp 1324-1333, issn 1073-5623, 10 p.Conference Paper

Microstructural characterisation of Ti-Nb-(Fe-Cr) alloys obtained by powder metallurgyAMIGO, A; ZAMBRANO, J; MARTINEZ, S et al.Powder metallurgy. 2014, Vol 57, Num 5, pp 316-319, issn 0032-5899, 4 p.Article

Thermodynamics of α'(Fe-Rich bcc) + α(Cr-Rich bcc) → α(bcc) and α^para → α^ferro Transformations in Fe-20 wt pct Cr Alloy: Drop Calorimetry Study and Elucidation of Magnetic Contribution to Phase StabilityRAJ NARAYAN HAJRA; RAJU, Subramanian; ARUN KUMAR RAI et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 8, pp 3386-3400, issn 1073-5623, 15 p.Article

Ni-Mo-Cr Alloy Shows Versatility inCARON, Jeremy L; BRITTON, Mark A; MECK, N. Sabrina et al.Welding journal. 2011, Vol 90, Num 3, pp 40-43, issn 0043-2296, 4 p.Article

Gaseous carburising of self-passivating Fe- Cr-Ni alloys in acetylene-hydrogen mixtures : ProcessingCHRISTIANSEN, T. L; HUMMELSHØJ, T. S; SOMERS, M. A. J et al.Surface engineering. 2011, Vol 27, Num 8, pp 602-608, issn 0267-0844, 7 p.Article

Precipitation behavior of Heusler phase (Ni₂AlHf) in multiphase NiAl alloyCUI, C. Y; GUO, J. T; YE, H. Q et al.Journal of materials science. 2006, Vol 41, Num 10, pp 2981-2987, issn 0022-2461, 7 p.Article

Corrosion characteristics of the wrought Ni-Cr-Mo alloysCROOK, P.Materials and corrosion (1995). 2005, Vol 56, Num 9, pp 606-610, issn 0947-5117, 5 p.Article

Surface tension of liquid Fe-Cr-O alloys at 1823 KLEE, Joonho; YAMAMOTO, Koji; MORITA, Kazuki et al.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2005, Vol 36, Num 2, pp 241-246, issn 1073-5615, 6 p.Article

Effect of composition on the solidification behavior of several Ni-Cr-Mo and Fe-Ni-Cr-Mo alloysPERRICONE, M. J; DUPONT, J. N.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2006, Vol 37, Num 4, pp 1267-1280, issn 1073-5623, 14 p.Article

Chromium: historical perspectives = Chrome: HistoriqueNRIAGU, J. O.Advances in environmental science and technology. 1988, Vol 20, pp 1-19, issn 0065-2563Article

Le caratteristiche di vu riporto applicato con un laser = Caractéristiques du rechargement au laser = Characteristics of laser claddingBABAN, B; GIORDANO, L; TIZIANI, A et al.1986, Vol 37, Num 852, pp 62-64, issn 0035-6301Article

Predeformation and Subsequent Annealing—A Way for Controlling Morphology of Carbides in Large Dimensional Bulk Nanocrystalline Fe-Al-Cr AlloyHONGDING WANG; PEIQING LA; TING SHI et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 1, pp 522-528, issn 1073-5623, 7 p.Article

Notch Impact Behavior of Oxide-Dispersion-Strengthened (ODS) Fe20Cr5Al AlloyCHAO, J; CAPDEVILA, C; SERRANO, M et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2013, Vol 44, Num 10, pp 4581-4594, issn 1073-5623, 14 p.Article

Determination of critical pitting temperatures for Ni-Cr-Mo alloys using electrochemical noise measurementsSCHMIGALLA, S; HEYN, A.Materials and corrosion (1995). 2013, Vol 64, Num 8, pp 700-707, issn 0947-5117, 8 p.Article

Oxidation kinetics of Y-doped FeCrAl-alloys in low and high pO₂ gasesYOUNG, D. J; NAUMENKO, D; NIEWOLAK, L et al.Materials and corrosion (1995). 2010, Vol 61, Num 10, pp 838-844, issn 0947-5117, 7 p.Article

Oxidation behaviour of Fe-Cr-Al alloys during resistance and furnace heatingECHSLER, H; HATTENDORF, H; SINGHEISER, L et al.Materials and corrosion (1995). 2006, Vol 57, Num 2, pp 115-121, issn 0947-5117, 7 p.Article

Metastable alumina formation during oxidation of FeCrAl and its suppression by surface treatmentsN'DAH, E; GALERIE, A; WOUTERS, Y et al.Materials and corrosion (1995). 2005, Vol 56, Num 12, pp 843-847, issn 0947-5117, 5 p.Article

Characteristic fatigue-creep life map of a Fe-Ni-Cr alloy melted in vacuum and in air at high temperatureQINGFU HE.Journal of materials science. 2004, Vol 39, Num 10, pp 3469-3470, issn 0022-2461, 2 p.Article

Mapping of the Nb-Cr-Ti phase diagram using diffusion multiplesZHAO, J.-C; JACKSON, M. R; PELUSO, L. A et al.Zeitschrift für Metallkunde. 2004, Vol 95, Num 3, pp 142-146, issn 0044-3093, 5 p.Article

Influence of Cr content on the phase composition of the Fe-(11 to 23)Cr-12Mn-0.6N steelsBAEVA, M; BESKROVNYL, A; JADROWSKI, F et al.Journal of materials science letters. 2003, Vol 22, Num 24, pp 1787-1789, issn 0261-8028, 3 p.Article

Host element chemical diffusion studies in high-purity Fe-Cr-Al model alloysDAWAH TANKEU, P; GRUZDEVA, A; ZAPUKHLYAK, M et al.Matériaux et techniques. 2003, Vol 91, Num 7-9, pp 87-91, issn 0032-6895, 5 p.Article

Host Atom Diffusion in Ternary Fe-Cr-Al AlloysROHRBERG, Diana; SPITZER, Karl-Heinz; DÖRRER, Lars et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 1, pp 269-279, issn 1073-5623, 11 p.Article

Dislocation Structures in a Cyclically Deformed Single-Slip-Oriented Fe-35 wt pct Cr Alloy Single Crystal Containing Fine Cr-Rich PrecipitatesLI, Xiao-Wu; UMAKOSHI, Yukichi.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2012, Vol 43, Num 13, pp 5038-5047, issn 1073-5623, 10 p.Article