Investigation of structure and mechanical properties of multi-layered Al/Cu composite produced by accumulative roll bonding (ARB) processEIZADJOU, M; KAZEMI TALACHI, A; DANESH MANESH, H et al.Composites science and technology. 2008, Vol 68, Num 9, pp 2003-2009, issn 0266-3538, 7 p.Article

Correlation of microcrack fracture size with fatigue cycling on non-crimp fabric/RTM6 composite in the uniaxial fatigue testSHIINO, M. Y; DE CAMARGO, L. M; CIOFFI, M. O. H et al.Composites. Part B, Engineering. 2012, Vol 43, Num 5, pp 2244-2248, issn 1359-8368, 5 p.Article

Multi-scale interlaminar fracture mechanisms in woven composite laminates reinforced with aligned carbon nanotubesWICKS, Sunny S; WENNIE WANG; WILLIAMS, Marcel R et al.Composites science and technology. 2014, Vol 100, pp 128-135, issn 0266-3538, 8 p.Article

Fracture behavior of individual carbon fibers in tension using nano-fabricated notchesKANT, M; PENUMADU, D.Composites science and technology. 2013, Vol 89, pp 83-88, issn 0266-3538, 6 p.Article

Influence of the principal tensile stresses on delamination fracture mechanisms and their associated morphology for different loading modes in carbon/epoxy compositesMOLLON, V; BONHOMME, J; VINA, J et al.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 1676-1680, issn 1359-8368, 5 p.Article

Interlayer self-healing and toughening of carbon fibre/epoxy composites using copolymer filmsWANG, Chun H; SIDHU, Komal; TAO YANG et al.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 3, pp 512-518, issn 1359-835X, 7 p.Article

Investigation of the deformation and failure mechanism of organo-montmorillonite filled PP―TPO nanocomposites under uniaxial tensionCHOI, Byoung-Ho; PHAM, Hoang T; ZHENWEN ZHOU et al.Composites. Part B, Engineering. 2012, Vol 43, Num 8, pp 3182-3191, issn 1359-8368, 10 p.Article

On compressive failure of multidirectional fibre-reinforced composites: A fractographic studyTSAMPAS, S. A; GREENHALGH, E. S; ANKERSEN, J et al.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 3, pp 454-468, issn 1359-835X, 15 p.Article

Improvements in interlaminar strength: A carbon nanotube approachSTORCK, Steven; MALECKI, Harry; SHAH, Tushar et al.Composites. Part B, Engineering. 2011, Vol 42, Num 6, pp 1508-1516, issn 1359-8368, 9 p.Article

Effects of steam environment on creep behavior of Nextel™720/alumina-mullite ceramic composite at elevated temperatureRUGGLES-WRENN, M. B; KUTSAL, T.Composites. Part A, Applied science and manufacturing. 2010, Vol 41, Num 12, pp 1807-1816, issn 1359-835X, 10 p.Article

Hygrothermal effect on henequen or silk fiber reinforced poly(butylene succinate) biocompositesSEONG OK HAN; HO JUNG AHN; CHO, Donghwan et al.Composites. Part B, Engineering. 2010, Vol 41, Num 6, pp 491-497, issn 1359-8368, 7 p.Article

Creep of Nextel™720/alumina-mullite ceramic composite at 1200 °C in air, argon, and steamRUGGLES-WRENN, M. B; GENELIN, C. L.Composites science and technology. 2009, Vol 69, Num 5, pp 663-669, issn 0266-3538, 7 p.Article

Fractographic observations on delamination growth and the subsequent migration through the laminateGREENHALGH, Emile S; ROGERS, Charlotte; ROBINSON, Paul et al.Composites science and technology. 2009, Vol 69, Num 14, pp 2345-2351, issn 0266-3538, 7 p.Conference Paper

Compatibilizing and toughening bamboo flour-filled HDPE composites : Mechanical properties and morphologiesLIU, H; WU, Q; HAN, G et al.Composites. Part A, Applied science and manufacturing. 2008, Vol 39, Num 12, pp 1891-1900, issn 1359-835X, 10 p.Article

High cycle fatigue response of in-situ Al-based composites containing TiB₂ and Al₂O₃ submicron particlesTJONG, S. C; WANG, G. S; MAI, Y.-W et al.Composites science and technology. 2005, Vol 65, Num 10, pp 1537-1546, issn 0266-3538, 10 p.Article

Impact and compression-after-impact performance of weft-knitted glass textile compositesKHONDKER, O. A; LEONG, K. H; HERSZBERG, I et al.Composites. Part A, Applied science and manufacturing. 2005, Vol 36, Num 5, pp 638-648, issn 1359-835X, 11 p.Article

Fractographic study of vinylidene polyfluoride copolymers by scanning electronic microscopySERDANI, A; BOUZAHER, Y; BELLOUM, M et al.Composites. Part A, Applied science and manufacturing. 2005, Vol 36, Num 4, pp 493-496, issn 1359-835X, 4 p.Conference Paper

Formation of damage and its effects on non-crimp fabric reinforced composites loaded in tensionEDGREN, Fredrik; MATTSSON, David; ASP, Leif E et al.Composites science and technology. 2004, Vol 64, Num 5, pp 675-692, issn 0266-3538, 18 p.Article

Wear characteristic of epoxy resin filled with crushed-silica particlesKANCHANOMAI, C; NORAPHAIPHIPAKSA, N; MUTOH, Y et al.Composites. Part B, Engineering. 2011, Vol 42, Num 6, pp 1446-1452, issn 1359-8368, 7 p.Article

Fracture toughness of microsphere Al₂O₃-Al particulate metal matrix compositesCROSKY, A. G; HELLIER, A. K et al.Composites. Part B, Engineering. 2008, Vol 39, Num 7-8, pp 1270-1279, issn 1359-8368, 10 p.Article

Mechanical and metallurgical properties of friction-welded TiC particulate reinforced Ti-6Al-4VDA SILVA, Antonio A. M; MEYER, Axel; DOS SANTOS, Jorge F et al.Composites science and technology. 2004, Vol 64, Num 10-11, pp 1495-1501, issn 0266-3538, 7 p.Article

Effect of deflocculants on hardness and densification of YSZ-Al₂O₃ (whiskers & particulates) compositesABDULLAH, Muhammad; AHMAD, Jamil; MEHMOOD, Mazhar et al.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 1564-1569, issn 1359-8368, 6 p.Article

The effect of carbon nanoparticles on the fatigue performance of carbon fibre reinforced epoxyKNOLL, J. B; RIECKEN, B. T; KOSMANN, N et al.Composites. Part A, Applied science and manufacturing. 2014, Vol 67, pp 233-240, issn 1359-835X, 8 p.Article

Deformation and fracture in graphene nanosheetsKUO, Wen-Shyong; TAI, Nyan-Hwa; CHANG, Ting-Wei et al.Composites. Part A, Applied science and manufacturing. 2013, Vol 51, pp 56-61, issn 1359-835X, 6 p.Article

Influence of nano-alumina and sub-micron copper on mechanical properties of magnesium alloy AZ31NGUYEN, Q. B; TUN, K. S; LIM, C. Y. H et al.Composites. Part B, Engineering. 2013, Vol 55, pp 486-491, issn 1359-8368, 6 p.Article