Drying of coatingsCANTER, Neil.Tribology & lubrication technology. 2011, Vol 67, Num 4, pp 8-9, issn 1545-858X, 2 p.Article

Semi-empirical modeling of the sputter deposition of coatings onto spherical capsulesJANKOWSKI, Alan F; HAYES, Jeffrey P.Surface & coatings technology. 2007, Vol 202, Num 4-7, pp 904-909, issn 0257-8972, 6 p.Conference Paper

Effects of deposition profiles on RF-sputtered Cu(In,Ga)Se₂ films at low substrate temperatureXING HUANG; XIANGSHUI MIAO; NIANNIAN YU et al.Applied surface science. 2013, Vol 287, pp 257-262, issn 0169-4332, 6 p.Article

Ion source characterization based on an array of retarding field analyzersBEERMANN, N; EHLERS, H; RISTAU, D et al.Proceedings of SPIE, the International Society for Optical Engineering. 2005, pp 59630H.1-59630H.11, issn 0277-786X, isbn 0-8194-5981-X, 1VolConference Paper

Nanokristalline Werkstoffe hergestellt mit dem Thermischen HF-Plasma = Nano-crystalline materials manufactured with the thermal RF-plasmaBLUM, J; HERRMANN, A; SCHWENK, A et al.Materialwissenschaft und Werkstofftechnik. 2003, Vol 34, Num 7, pp 618-622, issn 0933-5137, 5 p.Article

Recent developments in vacuum science and technology 2003Dąbrowski, Jarek.2003, isbn 81-7736-118-X, 200 p., isbn 81-7736-118-XBook

Smooth germanium nanowires prepared by a hydrothermal deposition processPEI, L. Z; ZHAO, H. S; TAN, W et al.Materials characterization. 2009, Vol 60, Num 11, pp 1400-1405, issn 1044-5803, 6 p.Article

Proceedings of the Eleventh International Meeting on Ferroelectricity (IMF-11), Iguassu Falls, Brazil, September 5-9, 2005. Part III of VIIMIGONI, Ricardo L; STACHIOTTI, Marcelo G.Ferroelectrics (Print). 2006, Vol 335, issn 0015-0193, 297 p.Conference Proceedings

International Conference of Nitride Semiconductors (ICNS-7)Physica status solidi. A, Applications and materials science (Print). 2008, Vol 205, Num 5, pp 1053-1105, issn 1862-6300, 52 p.Conference Paper

Materials and coatings for extreme environments performance (investigations, applications, ecologically safe technologies for their production and utilization, abstracts)Materials and coatings for extreme environments performance. International conference. 2000, 1Vol, 430 p.Conference Proceedings

The composite Fe-Ti-B-C coatings by PTA powder surfacing processWANG XIBAO; WANG XIAOFENG; SHI ZHONGQUAN et al.Surface & coatings technology. 2005, Vol 192, Num 2-3, pp 257-262, issn 0257-8972, 6 p.Article

Deposition error compensation for optical multilayer coatings. II: Experimental results-sputtering systemSULLIVAN, B. T; DOBROWOLSKI, J. A.Applied optics. 1993, Vol 32, Num 13, pp 2351-2360, issn 0003-6935Article

Status of NIF mirror technologies for completion of the NIF facilitySTOLZ, C. J.Proceedings of SPIE, the International Society for Optical Engineering. 2008, Vol 7101, pp 710115.1-710115.11, issn 0277-786X, isbn 978-0-8194-7331-8 0-8194-7331-6, 1VolConference Paper

The proceedings of International Union of the Materials Research Society - International Conference in Asia 2012- IUMRS-ICA 2012KIM, Doyoung; KANG, Hyunil; LEE, Taeyoon et al.Thin solid films. 2013, Vol 546, issn 0040-6090, 477 p.Conference Proceedings

7th International Conference on Si Epitaxy and Heterostructures (ICSI-7)HARTMANN, Jean-Michel; LOO, Roger; NGOC DUY NGUYEN et al.Thin solid films. 2012, Vol 520, Num 8, issn 0040-6090, 296 p.Conference Proceedings

Chemical analysis of silicone outgassingVILLAHERMOSA, Randy M; OSTROWSKI, Alexis D.Proceedings of SPIE, the International Society for Optical Engineering. 2008, Vol 7069, pp 706906.1-706906.10, issn 0277-786X, isbn 978-0-8194-7289-2 0-8194-7289-1, 1VolConference Paper

Effect of the deposition type on the structure of terthiophene-vinylbenzoate Langmuir-Blodgett filmsMIETTINEN, Katja; VUORIMAA, Elina; CATTANEO, Stefano et al.Thin solid films. 2008, Vol 516, Num 21, pp 7764-7769, issn 0040-6090, 6 p.Article

Formation of an epitaxial monolayer on graphite upon short-time surface contact with highly diluted aqueous solutions of 1-monostearoylglycerolESCUDERO, Carlos; EL-HACHEMI, Zoubir; DIEZ-PEREZ, Ismael et al.Thin solid films. 2007, Vol 515, Num 13, pp 5391-5394, issn 0040-6090, 4 p.Article

Effect of spray angle on three-dimensional flow and deposition process in atmospheric plasma spray torch : A numerical studyKO, Tzu-Hsiang; TING, Kuen; YEH, C. C et al.Surface & coatings technology. 2006, Vol 200, Num 10, pp 3376-3379, issn 0257-8972, 4 p.Conference Paper

Surface properties of film deposition using molecular dynamics simulationCHU, Ching-Jiung; CHEN, Tei-Chen.Surface & coatings technology. 2006, Vol 201, Num 3-4, pp 1796-1804, issn 0257-8972, 9 p.Article

Controllable deposition of gadolinium doped ceria electrolyte films by magnetic-field-assisted electrostatic spray depositionKSAPABUTR, Bussarin; CHALERMKITI, Tanapol; WONGKASEMJIT, Sujitra et al.Thin solid films. 2013, Vol 546, pp 423-430, issn 0040-6090, 8 p.Conference Paper

The role of strain rate during deposition of CAP on Ti6A14V by superplastic deformation-like method using high-temperature compression test machineRAMDAN, R. D; JAUHARI, I; HASAN, R et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2008, Vol 477, Num 1-2, pp 300-305, issn 0921-5093, 6 p.Article

Three-dimensional isothermal solid-gas flow and deposition process in a plasma spray torch with solid shield : A numerical studyKO, T. H; CHEN, H. K.Surface & coatings technology. 2005, Vol 200, Num 7, pp 2152-2164, issn 0257-8972, 13 p.Article

Proceedings of the 39th International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2012), San Diego, California (USA), April 23-27, 2012ABADIAS, Gregory; AOUADI, Samir; PETROV, Ivan et al.Thin solid films. 2013, Vol 528, issn 0040-6090, 278 p.Conference Proceedings

8th International Conference on Coatings on Glass and Plastics-ICCG8SZYSZKA, B; KONDRUWEIT, S; PUETZ, J et al.Thin solid films. 2012, Vol 520, Num 12, issn 0040-6090, 128 p.Conference Proceedings