Large displacement aspects on fracture testing with double cantilever beam specimensNILSSON, Fred.International journal of fracture. 2006, Vol 139, Num 2, pp 305-311, issn 0376-9429, 7 p.Article

On use of double cantilever beam for coatings and adhesion testsTROCZYNSKI, T; CAMIRE, J.Engineering fracture mechanics. 1995, Vol 51, Num 2, pp 327-332, issn 0013-7944Article

Mode I and mode II initiation fracture toughness and resistance curve of medium density fiberboard measured by double cantilever beam and three-point bend end-notched flexure testsYOSHIHARA, Hiroshi.Engineering fracture mechanics. 2010, Vol 77, Num 13, pp 2537-2549, issn 0013-7944, 13 p.Article

INFRARED EMISSION FROM HEATED MICROCANTILEVERSKWON, B; SCHULMERICH, M. V; BHARGAVA, R et al.Nanoscale and microscale thermophysical engineering. 2013, Vol 17, Num 2, pp 141-153, issn 1556-7265, 13 p.Article

Les propriétés mécaniques des roches crustales : De la fissure isolée à la population de fissures = Mechanical properties of crustal rocks : From a single crack to a population of cracksRESUCHLE, T; GUEGUEN, Y.Bulletin de la Société géologique de France. 1993, Vol 164, Num 2, pp 289-299, issn 0037-9409Conference Paper

A cohesive crack model coupled with damage for interface fatigue problemsBAOMING GONG; PAGGI, Marco; CARPINTERI, Alberto et al.International journal of fracture. 2012, Vol 173, Num 2, pp 91-104, issn 0376-9429, 14 p.Article

Interlaminar fracture toughness of unidirectional DCB specimens: A novel theoretical approachSHOKRIEH, M. M; HEIDARI-RARANI, M; AYATOLLAHI, M. R et al.Polymer testing. 2012, Vol 31, Num 1, pp 68-75, issn 0142-9418, 8 p.Article

Traction law for inclined through-thickness reinforcement using a geometrical approachPLAIN, Kristopher P; LIYONG TONG.Composite structures. 2009, Vol 88, Num 4, pp 558-569, issn 0263-8223, 12 p.Article

A new data reduction scheme for mode I wood fracture characterization using the double cantilever beam testDE MOURA, M. F. S. F; MORAIS, J. J. L; DOURADO, N et al.Engineering fracture mechanics. 2008, Vol 75, Num 13, pp 3852-3865, issn 0013-7944, 14 p.Article

The estimate of the effect of z-pins on the strain release rate, fracture and fatigue in a composite co-cured z-pinned double cantilever beamBYRD, Larry W; BIRMAN, Victor.Composite structures. 2005, Vol 68, Num 1, pp 53-63, issn 0263-8223, 11 p.Article

Improvement of adhesive toughness measurementQINGSHI MENG; ZAMAN, Izzuddin; HANNAM, Joshua R et al.Polymer testing. 2011, Vol 30, Num 2, pp 243-250, issn 0142-9418, 8 p.Article

The effect of stitch incline angle on mode I fracture toughness ― Experimental and modellingPLAIN, Kristopher P; LIYONG TONG.Composite structures. 2010, Vol 92, Num 7, pp 1620-1630, issn 0263-8223, 11 p.Article

Shear and crack tip deformation correction for the double cantilever beam and three-point end-notched flexure specimens for mode I and mode II fracture toughness measurement of woodYOSHIHARA, Hiroshi; SATOH, Akihiko.Engineering fracture mechanics. 2009, Vol 76, Num 3, pp 335-346, issn 0013-7944, 12 p.Article

Using the climbing drum peel (CDP) test to obtain a G_IC value for core/face sheet bondsNETTLES, A. T; GREGORY, E. D; JACKSON, J. R et al.Journal of composite materials. 2007, Vol 41, Num 24, pp 2863-2876, issn 0021-9983, 14 p.Article

The Characteristics of Shear Adhesive Interface Fracture of Aluminum Foam DCB Bonded Using a Single-Lap MethodHO SUN CHO; JAE UNG CHO.International journal of precision engineering and manufacturing. 2014, Vol 15, Num 7, pp 1345-1350, 6 p.Article

Effect of Temperature on Mode I Interlaminar Fracture of IM7/PETI-5 and IM7/977-2 LaminatesOLIVER, Mark S; JOHNSON, W. Steven.Journal of composite materials. 2009, Vol 43, Num 10, pp 1213-1219, issn 0021-9983, 7 p.Article

Enhancing Fracture Toughness of Glass/Epoxy Composites by Using Rubber Particles Together with Silica NanoparticlesTSAI, Jia-Lin; HUANG, Bao-Hung; CHENG, Yi-Lieh et al.Journal of composite materials. 2009, Vol 43, Num 25, pp 3107-3123, issn 0021-9983, 17 p.Article

A study on fatigue crack propagation in thick composite adhesively bonded jointsBERNASCONI, A; JAMIL, A; MORONI, F et al.International journal of fatigue. 2013, Vol 50, pp 18-25, issn 0142-1123, 8 p.Conference Paper

Clamped-free double-walled carbon nanotube-based mass sensorELISHAKOFF, I; VERSACI, C; MUSCOLINO, G et al.Acta mechanica. 2011, Vol 219, Num 1-2, pp 29-43, issn 0001-5970, 15 p.Article

Modelling and identification of delamination in double-layer beams by the virtual distortion methodORLOWSKA, Anita; KOLAKOWSKI, Przemystaw; HOLNICKI-SZULC, Jan et al.Computers & structures. 2008, Vol 86, Num 23-24, pp 2203-2214, issn 0045-7949, 12 p.Article

Simplified Erection Guidelines for Double I-Girder Systems During Bridge ConstructionBAOLIN YU; QIUHONG ZHAO; BURDETTE, Edwin G et al.Transportation research record. 2010, Num 2172, pp 74-83, issn 0361-1981, 10 p.Article

The root rotation in double cantilever beam and peel testsCOTTERELL, B; HBAIEB, K; WILLIAMS, J. G et al.Mechanics of materials. 2006, Vol 38, Num 7, pp 571-584, issn 0167-6636, 14 p.Article

Finite element interface technology for modeling delamination growth in composite structuresPANTANO, Antonio; AVERILL, Ronald C.AIAA journal. 2004, Vol 42, Num 6, pp 1252-1260, issn 0001-1452, 9 p.Article

Evaluation of fracture energy G_IC using a double cantilever beam fibre composite specimenNAGESWARA RAO, B; ACHARYA, A. R.Engineering fracture mechanics. 1995, Vol 51, Num 2, pp 317-322, issn 0013-7944Article

Mixed mode cohesive lawHOGBERG, J. L.International journal of fracture. 2006, Vol 141, Num 3-4, pp 549-559, issn 0376-9429, 11 p.Article