Dynamic strain ageing in Ni-base superalloy 720LiGOPINATH, K; GOGIA, A. K; KAMAT, S. V et al.Acta materialia. 2009, Vol 57, Num 4, pp 1243-1253, issn 1359-6454, 11 p.Article

Investigation of dynamic strain aging in SA106 Gr.C piping steelJIN WEON KIM; IN SUP KIM.Nuclear engineering and design. 1997, Vol 172, Num 1-2, pp 49-59, issn 0029-5493Article

An analysis of kinetic Monte Carlo simulation as a tool for modelling strain ageingGATER, A. J. P; BROWN, S. G. R.Scripta materialia. 2005, Vol 53, Num 6, pp 625-630, issn 1359-6462, 6 p.Article

Praxisgerechte Bedingungen für das Schweissen in kaltverformten Bereichen am Beispiel DIN 18800 Teil 1 - Diskussionsgrundlage = Practice-oriented conditions for welding in cold formed areas by the example DIN 18800 Part 1 - basis for discussion = Conditions pratiques pour le soudage dans des milieux formés à froid, selon DIN 18800, 1. partie - base de discussionBATHKE, W.Der Stahlbau. 1997, Num 2, pp 78-84, issn 0038-9145Article

Activation energy for serrated flow in type 316L(N) austenitic stainless steelCHOUDHARY, B. K.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 603, pp 160-168, issn 0921-5093, 9 p.Article

Low cycle fatigue behavior of alloy 690 in simulated PWR water-Effects of dynamic strain aging and hydrogenHONG, Jong-Dae; JUNHO LEE; CHANGHEUI JANG et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 611, pp 37-44, issn 0921-5093, 8 p.Article

Microstructure and mechanical response of single-crystalline high-manganese austenitic steels under high-pressure torsion: The effect of stacking-fault energyASTAFUROVA, E. G; TUKEEVA, M. S; MAIER, G. G et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 604, pp 166-175, issn 0921-5093, 10 p.Article

Tensile deformation behavior of a nickel based superalloy at different temperaturesHRUTKAY, K; KAOUMI, D.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 599, pp 196-203, issn 0921-5093, 8 p.Article

Modeling of materials behavior at various temperatures of hot isostatically pressed superalloysLEE, Keum-Oh; LEE, Soon-Bok.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2012, Vol 541, pp 81-87, issn 0921-5093, 7 p.Article

Thermo-mechanical fatigue behaviour of a duplex stainless steelKOLMORGEN, Roman; BIERMANN, Horst.International journal of fatigue. 2012, Vol 37, pp 86-91, issn 0142-1123, 6 p.Article

Tensile flow and work hardening behaviour of 9Cr―1Mo ferritic steel in the frame work of Voce relationshipCHRISTOPHER, J; CHOUDHARY, B. K; ISAAC SAMUEL, E et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2011, Vol 528, Num 21, pp 6589-6595, issn 0921-5093, 7 p.Article

Orientation dependence of twinning and strain hardening behaviour of a high manganese twinning induced plasticity steel with polycrystalline structureBELADI, H; TIMOKHINA, I. B; ESTRIN, Y et al.Acta materialia. 2011, Vol 59, Num 20, pp 7787-7799, issn 1359-6454, 13 p.Article

Ductility of an aluminum-4.4 wt. pct. magnesium alloy at warm- and hot-working temperaturesCHANG, Jung-Kuei; TAKATA, Ken; ICHITANI, Koji et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2010, Vol 527, Num 16-17, pp 3822-3828, issn 0921-5093, 7 p.Article

Effect of strain ageing on the mechanical properties of interstitial-free steels under as-received, heat-treated, and spot-welded conditions for automotive applicationsBAK, A; GÜNDÜZ, S.Proceedings of the Institution of Mechanical Engineers. Part D, Journal of automobile engineering. 2010, Vol 224, Num 1, pp 29-40, issn 0954-4070, 12 p.Article

Effects of laser shock processing and strain rate on tensile property of LY2 aluminum alloyLU, J. Z; LUO, K. Y; ZHANG, Y. K et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2010, Vol 528, Num 2, pp 730-735, issn 0921-5093, 6 p.Article

Hot deformation behavior of a new austenite―ferrite duplex stainless steel containing high content of nitrogenFANG, Y. L; LIU, Z. Y; SONG, H. M et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2009, Vol 526, Num 1-2, pp 128-133, issn 0921-5093, 6 p.Article

Investigation of the rotary swaging and heat treatment on the behavior of W-and γ-phases in PM 92.5W-5Ni-2.5Fe-0.26Co heavy alloyKATAVIC, Boris; ODANOVIC, Zoran; BURZIC, Meri et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2008, Vol 492, Num 1-2, pp 337-345, issn 0921-5093, 9 p.Article

The dynamics of Portevin-Le Chatelier bands in an Al-Mg alloy from infrared thermographyAIT-AMOKHTAR, H; FRESSENGEAS, C; BOUDRAHEM, S et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2008, Vol 488, Num 1-2, pp 540-546, issn 0921-5093, 7 p.Article

Effect of dynamic strain aging on high temperature properties of austenitic stainless steelKAIPING PENG; KUANGWU QIAN; WENZHE CHEN et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2004, Vol 379, pp 372-377, issn 0921-5093, 6 p.Article

An investigation of serrated yielding in 5000 series aluminum alloysWEI WEN; MORRIS, J. G.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2003, Vol 354, Num 1-2, pp 279-285, issn 0921-5093, 7 p.Article

Influence of dynamic strain aging on the ductile tearing of C-Mn steels: modelling by a local approach methodWAGNER, D; MORENO, J. C; PRIOUL, C et al.Journal of nuclear materials. 2002, Vol 300, Num 2-3, pp 178-191, issn 0022-3115Article

Mechanism of bake hardening in ultralow carbon steel containing niobium and titanium additionsBAKER, L. J; PARKER, J. D; DANIEL, S. R et al.Materials science and technology. 2002, Vol 18, Num 5, pp 541-547, issn 0267-0836Conference Paper

Alternate heat treatments of C458 aluminum lithium alloyPARRISH, C; BARBA, J; OH, H. M et al.Materials science forum. 2000, pp 655-661, issn 0255-5476, isbn 0-87849-853-2, 3VolConference Paper

Effect of strain rate on the tensile properties of unirradiated and irradiated V-4Cr-4TiROWCLIFFE, A. F; ZINKLE, S. J; HOELZER, D. T et al.Journal of nuclear materials. 2000, Vol 283-87, pp 508-512, issn 0022-3115, aConference Paper

Deformation and fracture of Al₂O₃/Al-Zn-Mg-Cu metal matrix composites at room and elevated temperaturesWU, Y.-L; CHAO, C.-G.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2000, Vol 282, Num 1-2, pp 193-202, issn 0921-5093Article