au.\*:("HAYES, S. A")
Results 1 to 25 of 27
Selection :
WATER QUALITY IMPROVEMENTS USING MODIFIED SEDIMENT CONTROL SYSTEMS ON CONSTRUCTION SITESMCLAUGHLIN, R. A; HAYES, S. A; CLINTON, D. L et al.Transactions of the ASABE (Print). 2009, Vol 52, Num 6, pp 1859-1867, issn 2151-0032, 9 p.Article
Flow advancement through multi-layered preform with sandwich structureSONG, Y. S; YOUN, J. R.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 4, pp 1082-1088, issn 1359-835X, 7 p.Conference Paper
Effect of the interface stiffness and skin-core adhesion efficiency on the interfacial stress distribution of sandwich structuresPAPANICOLAOU, G. C; BAKOS, D. J; KOSMIDOU, Th. V et al.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 4, pp 1099-1106, issn 1359-835X, 8 p.Conference Paper
Effect of stitching on the low-velocity impact response of [03/903]s graphite/epoxy laminatesAYMERICH, F; PANI, C; PRIOLO, P et al.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 4, pp 1174-1182, issn 1359-835X, 9 p.Conference Paper
A resistance-based damage location sensor for carbon-fibre compositesHOU, L; HAYES, S. A.Smart materials and structures. 2002, Vol 11, Num 6, pp 966-969, issn 0964-1726, 4 p.Article
Numerical and experimental fatigue crack growth analysis in mode-I for repaired aluminum panels using composite materialHOSSEINI-TOUDESHKY, H; MOHAMMADI, B; SADEGHI, G et al.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 4, pp 1141-1148, issn 1359-835X, 8 p.Conference Paper
Crushing energy absorption of GFRP sandwich panels and corresponding monolithic laminatesVELECELA, O; FOUND, M. S; SOUTIS, C et al.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 4, pp 1149-1158, issn 1359-835X, 10 p.Conference Paper
Fatigue analysis of honeycomb-composite sandwich beamsBELINGARDI, G; MARTELLA, P; PERONI, L et al.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 4, pp 1183-1191, issn 1359-835X, 9 p.Conference Paper
Microstructure, tensile and fatigue properties of AA6061/20 vol.%Al2O3p friction stir welded jointsCESCHINI, L; BOROMEI, I; MINAK, G et al.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 4, pp 1200-1210, issn 1359-835X, 11 p.Conference Paper
Compressive fatigue limit of impact damaged composite laminatesBUTLER, R; ALMOND, D. P; HUNT, G. W et al.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 4, pp 1211-1215, issn 1359-835X, 5 p.Conference Paper
Influence of a matrix crack on stress transfer to an α-alumina fibre in epoxy resin using FEA and photoelasticityJOHNSON, A. C; ZHAO, F. M; HAYES, S. A et al.Composites science and technology. 2006, Vol 66, Num 13, pp 2023-2029, issn 0266-3538, 7 p.Article
Optical self-sensing of impact damage in composites using E-glass clothRAUF, A; HAND, R. J; HAYES, S. A et al.Smart materials and structures. 2012, Vol 21, Num 4, issn 0964-1726, 045021.1-045021.7Article
A review on composite materials based on recycled thermoplastics and glass fibresSCELSI, L; HODZIC, A; SOUTIS, C et al.Plastics, rubber and composites. 2011, Vol 40, Num 1, pp 1-10, issn 1465-8011, 10 p.Article
Selected papers from the Joint 8th International Conference on Deformation and Fracture of Composites (DFC-8) and Experimental Techniques and Design in Composite Materials (ETDCM-7), Sheffield, 3-6 April 2005SOUTIS, C; JONES, F. R; HAYES, S. A et al.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 4, issn 1359-835X, 198 p.Conference Proceedings
A self-healing thermosetting composite materialHAYES, S. A; JONES, F. R; MARSHIYA, K et al.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 4, pp 1116-1120, issn 1359-835X, 5 p.Conference Paper
Damage and residual strength of laminated carbon-epoxy composite circular plates loaded at the centreCESARI, F; DAL RE, V; MINAK, G et al.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 4, pp 1163-1173, issn 1359-835X, 11 p.Conference Paper
A finite element simulation and experimental validation of a composite bolted joint loaded in bending and torsionCAVATORTA, M. P; PAOLINO, D. S; PERONI, L et al.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 4, pp 1251-1261, issn 1359-835X, 11 p.Conference Paper
An improved model including plasticity for the prediction of the stress in fibres with an interface/interphase regionJOHNSON, A. C; HAYES, S. A; JONES, F. R et al.Composites. Part A, Applied science and manufacturing. 2005, Vol 36, Num 2, pp 263-271, issn 1359-835X, 9 p.Conference Paper
Stress transfer function for interface assessment in composites with plasma copolymer functionalized carbon fibresLOPATTANANON, N; HAYES, S. A; JONES, F. R et al.The Journal of adhesion (Print). 2002, Vol 78, Num 4, pp 313-350, issn 0021-8464Article
How Wide Do You Want the Jar?: The Effect on Diameter for Ease of Opening for Wide-mouth ClosuresYOXALL, A; LANGLEY, J; JANSON, R et al.Packaging technology & science. 2010, Vol 23, Num 1, pp 11-18, issn 0894-3214, 8 p.Article
On the delamination and debond suppression in structural joints by Z-fibre pinningALLEGRI, G; ZHANG, X.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 4, pp 1107-1115, issn 1359-835X, 9 p.Conference Paper
Investigation of anisotropic reinforcement patch cornersWIGGER, H. M; BECKER, W.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 4, pp 1131-1140, issn 1359-835X, 10 p.Conference Paper
Stiffness and fracture analysis of laminated composites with off-axis ply matrix crackingKASHTALYAN, Maria; SOUTIS, Costas.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 4, pp 1262-1269, issn 1359-835X, 8 p.Conference Paper
Phase-stepping photoelasticity for the measurement of interfacial shear stress in single fibre compositesZHAO, F. M; HAYES, S. A; PATTERSON, E. A et al.Composites. Part A, Applied science and manufacturing. 2006, Vol 37, Num 2, pp 216-221, issn 1359-835X, 6 p.Conference Paper
Polyacrylamide use for erosion and turbidity control on construction sitesHAYES, S. A; MCLAUGHLIN, R. A; OSMOND, D. L et al.Journal of soil and water conservation. 2005, Vol 60, Num 4, pp 193-199, issn 0022-4561, 7 p.Article