High temperature sulphide corrosion of TiAlNb and TiAlAg alloysPRZYBYLSKI, Kazimierz; PRAZUCH, Janusz; MAZIARZ, Wojciech et al.Annales de chimie (Paris. 1914). 2003, Vol 28, pp S223-S230, issn 0151-9107, SUP1Conference Paper

The Onset of Potassium Chloride Induced High Temperature Corrosion: A Novel Experimental ApproachJINGXIN SUI; LEHMUSTO, Juho; BERGELIN, Mikael et al.Oxidation of metals. 2014, Vol 82, Num 5-6, pp 437-456, issn 0030-770X, 20 p.Article

High temperature corrosion of power boiler components cladded with nickel alloysADAMIEC, Janusz.Materials characterization. 2009, Vol 60, Num 10, pp 1093-1099, issn 1044-5803, 7 p.Article

High temperature corrosion of metallic materials in molten carbonate fuel cells environmentDURANTE, G; VEGNI, S; CAPOBIANCO, P et al.Journal of power sources. 2005, Vol 152, pp 204-209, issn 0378-7753, 6 p.Conference Paper

Materials performance in simulated waste combustion environmentsPETTERSSON, R; FLYG, J; VIKLUND, P et al.Corrosion engineering, science and technology. 2008, Vol 43, Num 2, pp 123-128, issn 1478-422X, 6 p.Conference Paper

Determination of the corrosivity of Pb-containing salt mixturesBANKIEWICZ, Dorota; YRJAS, Patrik; LINDBERG, Daniel et al.Corrosion science. 2013, Vol 66, pp 225-232, issn 0010-938X, 8 p.Article

Influence of the gas particle flow characteristics of a low-NOx swirl burner on the formation of high temperature corrosionHAO ZHOU; YU YANG; KANG DONG et al.Fuel (Guildford). 2014, Vol 134, pp 595-602, issn 0016-2361, 8 p.Article

Total hemispherical radiation properties of oxidized nickel at high temperaturesTAI RAN FU; PENG TAN; JING REN et al.Corrosion science. 2014, Vol 83, pp 272-280, issn 0010-938X, 9 p.Article

Unusual oxidation behaviour of Zr₅₀Cu₅₀ alloy at high temperaturesPALJEVIC, M; TUDJA, M.Corrosion science. 2008, Vol 50, Num 3, pp 818-822, issn 0010-938X, 5 p.Article

Historique de l'oxydation à haute températureNISHIDA, K.Kinzoku Hyomen Gijutsu. 1986, Vol 37, Num 5, pp 222-228, issn 0026-0614Article

High temperature deformation behaviour of crystallized Si-B-C-N ceramics obtained from a boron modified poly(vinyl)silazane polymeric precursorRAVI KUMAR, N. V; MAGER, R; CAI, Y et al.Scripta materialia. 2004, Vol 51, Num 1, pp 65-69, issn 1359-6462, 5 p.Article

Comparison of high temperature shape memory behaviour for ZrCu-based, Ti-Ni-Zr and Ti-Ni-Hf alloysFIRSTOV, G. S; VAN HUMBEECK, J; KOVAL, Yu. N et al.Scripta materialia. 2004, Vol 50, Num 2, pp 243-248, issn 1359-6462, 6 p.Article

International workshop on «Critical issues concerning the mechanisms of high-temperature corrosion», Bad Honnef, FRG, May 1984 = Table ronde internationale sur «les résultats critiques concernant les mécanismes de corrosion à haute température», Bad Honnef, Allemagne Fédérale, mai 1984RAHMEL, A; WOOD, G. C; KOFSTAD, P et al.Oxidation of metals. 1985, Vol 23, Num 5-6, pp 251-337, issn 0030-770XConference Proceedings

The high temperature (T~1000 K) oxidation of molybdenum = L'oxydation à haute température (T~1000 K) du molybdèneRAYNAUD, G. M.Journal of materials science letters. 1984, Vol 3, Num 11, pp 965-967, issn 0261-8028Article

Microstructure and ablation properties of carbon/carbon composites modified by ZrSiO₄CAN SUN; HEJUN LI; QIANGANG FU et al.Corrosion science. 2014, Vol 79, pp 100-107, issn 0010-938X, 8 p.Article

Protective high temperature coatings with intrinsic depletion sensorALEKSANDROV, Krasimir; GALETZ, Mathias C; SCHMIDT, Gerald et al.Surface & coatings technology. 2014, Vol 245, pp 117-124, issn 0257-8972, 8 p.Article

Ablation resistance and thermal conductivity of carbon/carbon composites containing hafnium carbideLI CUIYAN; LI KEZHI; LI HEJUN et al.Corrosion science. 2013, Vol 75, pp 169-175, issn 0010-938X, 7 p.Article

Corrosion of carbon steel in concentrated LiNO₃ solution at high temperatureCHUNHUAN LUO; QINGQUAN SU.Corrosion science. 2013, Vol 74, pp 290-296, issn 0010-938X, 7 p.Article

High temperature corrosion studies of cermet particle reinforced NiCrBSi hardfacingsROJACZ, H; ZIKIN, A; MOZELT, C et al.Surface & coatings technology. 2013, Vol 222, pp 90-96, issn 0257-8972, 7 p.Article

Corrosion of austenitic alloys in high temperature supercritical carbon dioxideCAO, G; FIROUZDOR, V; SRIDHARAN, K et al.Corrosion science. 2012, Vol 60, pp 246-255, issn 0010-938X, 10 p.Article

On the oxidation mechanism of pure tungsten in the temperature range 600―800 °CCIFUENTES, S. C; MONGE, M. A; PEREZ, P et al.Corrosion science. 2012, Vol 57, pp 114-121, issn 0010-938X, 8 p.Article

Accelerated corrosion of MoO3-deposited copperKLIMASHIN, A. A; BELOUSOV, V. V.Corrosion science. 2011, Vol 53, Num 10, pp 3150-3155, issn 0010-938X, 6 p.Article

High temperature oxidation of metallic chromium exposed to eight different metal chloridesLEHMUSTO, J; SKRIFVARS, B.-J; YRJAS, P et al.Corrosion science. 2011, Vol 53, Num 10, pp 3315-3323, issn 0010-938X, 9 p.Article

Corrosion loss of mild steel in high temperature hard freshwaterMELCHERS, Robert E; CHERNOV, Boris B.Corrosion science. 2010, Vol 52, Num 2, pp 449-454, issn 0010-938X, 6 p.Article

Study of the corrosion and microstructure with annealing conditions of a β-quenched HANA-4 alloyKIM, Hyun-Gil; KIM, Il-Hyun; CHOI, Byung-Kwan et al.Corrosion science. 2010, Vol 52, Num 10, pp 3162-3167, issn 0010-938X, 6 p.Article