3D FE delamination induced damage analyses of adhesive bonded lap shear joints made with curved laminated FRP composite panelsPRADHAN, A. K; PARIDA, S. K.Journal of adhesion science and technology. 2013, Vol 27, Num 10, pp 1104-1121, issn 0169-4243, 18 p.Article

Adhesion of RFL-coated aramid fibres to sulphur- and peroxide-cured elastomersSHIRAZI, M; TALMA, A. G; NOORDERMEER, J. W. M et al.Journal of adhesion science and technology. 2013, Vol 27, Num 9, pp 1048-1057, issn 0169-4243, 10 p.Article

Characterization and modelling of the 3D elastic―plastic behaviour of an adhesively bonded joint under monotonic tension/compression-shear loads: influence of three cure cyclesMAURICE, Julien; COGNARD, Jean-Yves; CREAC'HCADEC, Romain et al.Journal of adhesion science and technology. 2013, Vol 27, Num 2, pp 165-181, issn 0169-4243, 17 p.Article

Comparison of mechanical and degradation properties of EG and EGDMA grafted gelatin filmsZAMAN, Haydar U; KHAN, Mubarak A; KHAN, Ruhul A et al.Journal of adhesion science and technology. 2013, Vol 27, Num 4, pp 413-422, issn 0169-4243, 10 p.Article

Crack propagation analysis in composite bonded joints under mixed-mode (I+II) static and fatigue loading: a damage-based modelCARRARO, P. A; MENEGHETTI, G; QUARESIMIN, M et al.Journal of adhesion science and technology. 2013, Vol 27, Num 13, pp 1393-1406, issn 0169-4243, 14 p.Article

Effect of side chain on wettability and adhesion performance of acrylic pressure-sensitive adhesives on thin silicon waferRYU, Chong-Min; PANG, Bei-Li; KIM, Hyung-Il et al.Journal of adhesion science and technology. 2013, Vol 27, Num 10, pp 1136-1145, issn 0169-4243, 10 p.Article

Increasing single-lap joint strength by adherend curvature-induced residual stressesTEMIZ, S; AKPINAR, S; AYDIN, M. D et al.Journal of adhesion science and technology. 2013, Vol 27, Num 3, pp 244-251, issn 0169-4243, 8 p.Article

Measurement of solder joint strength in freestanding chip-scale packages using a quantitative laser spallation techniqueJUN TIAN; HYOUNG IL KIM; GUPTA, Vijay et al.Journal of adhesion science and technology. 2013, Vol 27, Num 8, pp 835-842, issn 0169-4243, 8 p.Article

Mechanical characterization of industrial particleboard panels glued with cornstarch―mimosa tannin―urea formaldehyde resinsMOUBARIK, Amine; PIZZI, Antonio; CARRIER, Fatima et al.Journal of adhesion science and technology. 2013, Vol 27, Num 4, pp 423-429, issn 0169-4243, 7 p.Article

Particulate reinforcement and formaldehyde adsorption of modified nanocrystalline cellulose in urea-formaldehyde resin adhesiveHAO ZHANG; YING SHE; SHUPING SONG et al.Journal of adhesion science and technology. 2013, Vol 27, Num 9, pp 1023-1031, issn 0169-4243, 9 p.Article

Preparation and characterization of poly (ethylene glycol) grafted Ca-alginate fibers by γ-irradiation for biomedical applicationsKAMAL KHAN, Md; MIZANUR RAHMAN, Mohammed; NESA, Bodrun et al.Journal of adhesion science and technology. 2013, Vol 27, Num 2, pp 216-226, issn 0169-4243, 11 p.Article

Reduction of formaldehyde emission from plywoodGANGI, Marzieh; TABARSA, Taghi; SEPAHVAND, Sima et al.Journal of adhesion science and technology. 2013, Vol 27, Num 13, pp 1407-1417, issn 0169-4243, 11 p.Article

Tribological properties of selected ceramic coatingsVINAS, Ján; BREZINOVA, Janette; GUZANOVA, Anna et al.Journal of adhesion science and technology. 2013, Vol 27, Num 2, pp 196-207, issn 0169-4243, 12 p.Article

Ultrasound enhanced 50 Hz plasma treatment of glass-fiber-reinforced polyester at atmospheric pressureKUSANO, Y; NORRMAN, K; SINGH, S. V et al.Journal of adhesion science and technology. 2013, Vol 27, Num 7, pp 825-833, issn 0169-4243, 9 p.Article

Aging of hydrophobized surfaces of ramie fibers induced by atmospheric pressure plasma treatment with ethanol pretreatmentYING LI; JIE SUN; PANJIAO CHENG et al.Journal of adhesion science and technology. 2013, Vol 27, Num 22, pp 2387-2397, issn 0169-4243, 11 p.Article

Analysis and design of adhesively bonded joints for fatigue and fracture loading: a fracture-mechanics approachAZARI, S; AMELI, A; PAPINI, M et al.Journal of adhesion science and technology. 2013, Vol 27, Num 15, pp 1681-1711, issn 0169-4243, 31 p.Article

Effects of substrate bias voltage on adhesion of DC magnetron-sputtered copper films on E24 carbon steel: investigations by Auger electron spectroscopyOUIS, Abousoufiane; CAILLER, Michel.Journal of adhesion science and technology. 2013, Vol 27, Num 21, pp 2367-2386, issn 0169-4243, 20 p.Article

Electrochemical effects of silane pretreatments containing cerium nitrate on cathodic disbonding properties of epoxy coated steelSADEQ HOOSHMAND ZAFERANI; PEIKARI, Mahmood; ZAAREI, Davood et al.Journal of adhesion science and technology. 2013, Vol 27, Num 22, pp 2411-2420, issn 0169-4243, 10 p.Article

Evaluation of compatibility in SAN/EPDM blends by determination of the adhesion parametersSIROCIC, Anita Pticek; HRNJAK-MURGIC, Zlata; JELENCIC, Jasenka et al.Journal of adhesion science and technology. 2013, Vol 27, Num 15, pp 1652-1665, issn 0169-4243, 14 p.Article

Fabrication and mechanical analysis of mimosa tannin and commercial flax fibers biocompositesSAUGET, A; NICOLLIN, A; PIZZI, A et al.Journal of adhesion science and technology. 2013, Vol 27, Num 20, pp 2204-2218, issn 0169-4243, 15 p.Article

Influence of surface energy parameters of dental self-adhesive resin cements on bond strength to dentinYOUNG KYUNG KIM; JUN SIK SON; KIM, Kyo-Han et al.Journal of adhesion science and technology. 2013, Vol 27, Num 16, pp 1778-1789, issn 0169-4243, 12 p.Article

Kinetic and characterization of UV-curable silicone urethane methacrylate in semi-IPN-structured acrylic PSAsKIM, Pan-Seok; LEE, Seung-Woo; PARK, Ji-Won et al.Journal of adhesion science and technology. 2013, Vol 27, Num 17, pp 1866-1872, issn 0169-4243, 7 p.Article

Mapping the tack of the pressure-sensitive adhesive joint vs. applied stress and ageCHAU, Kin W.Journal of adhesion science and technology. 2013, Vol 27, Num 14, pp 1535-1547, issn 0169-4243, 13 p.Article

Micro- and nano-morphological modification of aluminum surface for adhesive bonding to polymeric compositesKIM, Won-Seock; KIM, Kyoung-Hwan; JANG, Chang-Jae et al.Journal of adhesion science and technology. 2013, Vol 27, Num 15, pp 1625-1640, issn 0169-4243, 16 p.Article

Mode II fracture energy in the adhesive bonding of dissimilar substrates: carbon fibre composite to aluminium jointsALIA, Cristina; ARENAS, José M; SUAREZ, Juan C et al.Journal of adhesion science and technology. 2013, Vol 27, Num 22, pp 2480-2494, issn 0169-4243, 15 p.Article