Liquefaction performance of soils at the site of a partially completed ground improvement project during the 1999 Chi-Chi earthquake in TaiwanLEE, Der-Her; JUANG, C. Hsein; KU, Chi-Sheng et al.Canadian geotechnical journal. 2001, Vol 38, Num 6, pp 1241-1253, issn 0008-3674Article

Assessing slope protection methods for weak rock slopes in Southwestern TaiwanLEE, Der-Her; YANG, Yi-En; LIN, Hung-Ming et al.Engineering geology. 2007, Vol 91, Num 2-4, pp 100-116, issn 0013-7952, 17 p.Article

Rainfall-based criteria for assessing slump rate of mountainous highway slopes: A case study of slopes along Highway 18 in Alishan, TaiwanCHANG, Shun-Kung; LEE, Der-Her; WU, Jian-Hong et al.Engineering geology. 2011, Vol 118, Num 3-4, pp 63-74, issn 0013-7952, 12 p.Article

Evaluation of soil liquefaction in the Chi-Chi, Taiwan earthquake using CPTKU, Chih-Sheng; LEE, Der-Her; WU, Jian-Hong et al.Soil dynamics and earthquake engineering (1984). 2004, Vol 24, Num 9-10, pp 659-673, issn 0267-7261, 15 p.Conference Paper

Reliability Analysis of Rock Wedge Stability: Knowledge-Based Clustered Partitioning ApproachLEE, Ya-Fen; CHI, Yun-Yao; HSEIN JUANG, C et al.Journal of geotechnical and geoenvironmental engineering. 2012, Vol 138, Num 6, pp 700-708, issn 1090-0241, 9 p.Article

Annual probability and return period of soil liquefaction in Yuanlin, Taiwan attributed to Chelungpu Fault and Changhua FaultLEE, Ya-Fen; CHI, Yun-Yao; JUANG, C. Hsein et al.Engineering geology. 2010, Vol 114, Num 3-4, pp 343-353, issn 0013-7952, 11 p.Article

Simplified DMT-based methods for evaluating liquefaction resistance of soilsTSAI, Pai-Hsiang; LEE, Der-Her; KUNG, Gordon Tung-Chin et al.Engineering geology. 2009, Vol 103, Num 1-2, pp 13-22, issn 0013-7952, 10 p.Article

Integrity assessment of rock mass behind the shotcreted slope using thermographyWU, Jian-Hong; LIN, Hung-Ming; LEE, Der-Her et al.Engineering geology. 2005, Vol 80, Num 1-2, pp 164-173, issn 0013-7952, 10 p.Article

A study of the liquefaction risk potential at Yuanlin, TaiwanLEE, Der-Her; KU, Chih-Sheng; HAIMING YUAN et al.Engineering geology. 2004, Vol 71, Num 1-2, pp 97-117, issn 0013-7952, 21 p.Article

Simplified cone penetration test-based method for evaluating liquefaction resistance of soilsHSEIN JUANG, C; HAIMING YUAN; LEE, Der-Her et al.Journal of geotechnical and geoenvironmental engineering. 2003, Vol 129, Num 1, pp 66-80, issn 1090-0241, 15 p.Article

Assessing CPT-based methods for liquefaction evaluation with emphasis on the cases from the Chi-Chi, Taiwan, earthquakeHSEIN JUANG, C; HAIMING YUAN; LEE, Der-Her et al.Soil dynamics and earthquake engineering (1984). 2002, Vol 22, Num 3, pp 241-258, issn 0267-7261Article

Simplified models for assessing annual liquefaction probability : A case study of the Yuanlin area, TaiwanLEE, Ya-Fen; CHI, Yun-Yao; LEE, Der-Her et al.Engineering geology. 2007, Vol 90, Num 1-2, pp 71-88, issn 0013-7952, 18 p.Article

A new ring-shear device for testing rocks under high normal stress and dynamic conditionsLIAO, Cheng-Jie; LEE, Der-Her; WU, Jian-Hong et al.Engineering geology. 2011, Vol 122, Num 1-2, pp 93-105, issn 0013-7952, 13 p.Article

Women in public enterprises: the case of the urban development authority (UDA), MalaysiaLOH LEE LEE.Public enterprise. 1993, Num 3-4, pp 198-208, issn 0351-3564Article

Experimental Verification of Methane―Carbon Dioxide Replacement in Natural Gas Hydrates Using a Differential Scanning CalorimeterSEUNGMIN LEE; YOHAN LEE; JAEHYOUNG LEE et al.Environmental science & technology. 2013, Vol 47, Num 22, pp 13184-13190, issn 0013-936X, 7 p.Article

Enhance operation and reliability of dividing-wall columnsSHIN, J; LEE, J; LEE, S et al.Hydrocarbon processing (International ed.). 2013, Vol 92, Num 5, pp 85-88, issn 0018-8190, 4 p.Article

Anisotropic mechanical properties of tantalum-continuous-fiber-reinforced amorphous matrix composites fabricated by liquid pressing processLEE, Kyuhong; LEE, Sang-Bok; LEE, Sang-Kwan et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2010, Vol 527, Num 7-8, pp 1875-1881, issn 0921-5093, 7 p.Article

Compressive and Tensile Properties of Tungsten-Continuous-Fiber-Reinforced Zr-Based Amorphous Alloy Matrix Composite Fabricated by Liquid Pressing ProcessLEE, Kyuhong; LEE, Sang-Bok; LEE, Sang-Kwan et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2008, Vol 39A, Num 6, pp 1319-1326, issn 1073-5623, 8 p.Article

Development of optimized point cloud merging algorithms for accurate processing to create earthwork site models : Innovative Sensing for Built EnvironmentSOOWOOK KWON; MINA LEE; MOONJU LEE et al.Automation in construction. 2013, Vol 35, pp 618-624, issn 0926-5805, 7 p.Conference Paper

Oxidation behaviors of two phase NiAl+Ni₃Al intermetallic compoundsSANGYUL LEE; LEE, Jung-Suk; JONGHOON LEE et al.High-temperature materials and processes. 2000, Vol 19, Num 6, pp 409-417, issn 0334-6455Article

Optimization of Delay-Constrained Video Transmission for Ad Hoc SurveillanceKWANGHYUN LEE; SUNGJIN LEE; SANGHOON LEE et al.IEEE transactions on vehicular technology. 2014, Vol 63, Num 4, pp 1855-1869, issn 0018-9545, 15 p.Article

Correlations Between FAS Elongation Cycle Genes Expression and Fatty Acid Production for Improvement of Long-Chain Fatty Acids in Escherichia coliSUNHEE LEE; YEONTAE JUNG; SEUNGHAN LEE et al.Applied biochemistry and biotechnology. 2013, Vol 169, Num 5, pp 1606-1619, issn 0273-2289, 14 p.Article

Improvements in electrical properties of piezoelectric microcantilever sensors by reducing parasitic effectsLEE, Sangkyu; LEE, Yeolho; LEE, Haksue et al.Journal of micromechanics and microengineering (Print). 2011, Vol 21, Num 8, issn 0960-1317, 085015.1-085015.10Article

Osteochondral Autograft Transplantation for Osteochondritis Dissecans of the Scaphoid: Case ReportLEE, Young-Keun; LEE, Malrey; LEE, Jun-Mo et al.The Journal of hand surgery (St. Louis, Mo.). 2011, Vol 36A, Num 5, pp 820-823, issn 0363-5023, 4 p.Article

Effect of precipitates on damping capacity and mechanical properties of T1-6A1-4V alloyLEE, Dong-Geun; LEE, Sunghak; LEE, Yongtai et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2008, Vol 486, Num 1-2, pp 19-26, issn 0921-5093, 8 p.Article