Lamellar structures in laser surface remelted Zn-Cu peritectic alloy under ultra-high temperature gradientYUNPENG SU; XIN LIN; MENG WANG et al.Scripta materialia. 2004, Vol 51, Num 5, pp 397-403, issn 1359-6462, 7 p.Article

Three-phase planar eutectic growth models for a ternary eutectic systemHIMEMIYA, T; UMEDA, T.Materials transactions - JIM. 1999, Vol 40, Num 7, pp 665-674, issn 0916-1821Article

En hongrois = A general analytical method to determine the distribution of spacing of the lamellar in pearlite = Untersuchungsverfahren zur Bestimmung der wahren Verteilung des Lamellenabstandes von PerlitRÉTI, T.Bányászati és kohászati lapok. Kohászat. 1985, Vol 118, Num 2, pp 67-73, issn 0005-5670Article

Correlation of the basic parameters of unidirectional solidification of the Pb-Sn eutectic = Korrelation der Grundparameter der gerichteten Erstarrung des Pb-Sn EutektikumsWOLCZYNSKI, W; CIACH, R.Crystal research and technology (1979). 1984, Vol 19, Num 8, pp 1093-1099, issn 0232-1300Article

Influence de la morphologie de la cémentite sur la rupture fragile de l'acierMESHKOV, YU. YA; PAKHARENKO, G. A; SHEVCHENKO, A. V et al.Metallofizika (Kiev). 1984, Vol 6, Num 4, pp 68-71, issn 0204-3580Article

Mechanisms and Kinetics of Static Spheroidization of Hot-Worked Ti-6Al-2Sn-4Zr-2Mo-0.1Si with a Lamellar MicrostructureCHAN HEE PARK; JONG WOO WON; PARK, Jin-Woo et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2012, Vol 43, Num 3, pp 977-985, issn 1073-5623, 9 p.Article

Bildanalytische Charakterisierung von Graphit im Grauguss und Klassifikation der Lamellenanordnung = Image analytical characterization of graphite in grey cast iron and classification of lamellar arrangementOHSER, J; SANDAU, K; STETS, W et al.Praktische Metallographie. 2003, Vol 40, Num 9, pp 454-473, issn 0032-678X, 20 p.Article

Theory of discontinuous precipitation: importance of the elastic strainBRENER, Efim A; TEMKIN, D. E.Acta materialia. 2003, Vol 51, Num 3, pp 797-803, issn 1359-6454, 7 p.Article

Growth model for oscillating precipitation structuresMILITZER, M; POMPE, W.Scripta metallurgica et materialia. 1991, Vol 25, Num 5, pp 1029-1034Article

Multilayered compact ribbons obtained by centrifuge melt spinning = Rubans compacts à multicouches obtenus par filage à l'état liquide centrifugeROSEN, G; GEFEN, Y; BARAM, J et al.Journal of materials science letters. 1985, Vol 4, Num 10, pp 1258-1260, issn 0261-8028Article

Effects of microstructure on fatigue crack growth behavior of Ti-6Al-2Zr-1Mo-1V ELI alloySHIKAI LI; BAIQING XIONG; SONGXIAO HUI et al.Materials characterization. 2008, Vol 59, Num 4, pp 397-401, issn 1044-5803, 5 p.Article

Precipitation of β particles in a fully lamellar Ti-47Al-2Nb-1Mn-0.5W-0.5Mo-0.2Si (at.%) alloyBEDDOES, J; CHEN, W. R; ZHAO, L et al.Journal of materials science. 2002, Vol 37, Num 3, pp 621-627, issn 0022-2461Article

Prediction of yield stress for polysynthetically twinned TiAl crystalsJUN YANG; GENGKAI HU; YONGGANG ZHANG et al.Scripta materialia. 2001, Vol 45, Num 3, pp 293-299, issn 1359-6462Article

Segregation of alloying elements in a fully lamellar TiAl alloyDU, X.-W; WANG, J. N; ZHU, J et al.Scripta materialia. 2001, Vol 45, Num 1, pp 19-24, issn 1359-6462Article

Effect of microstructural stability on creep behavior of 47XD TiAl alloys with fine-grained fully lamellar structureZHU, Hanliang; SEO, D. Y; MARUYAMA, K et al.Scripta materialia. 2005, Vol 52, Num 1, pp 45-50, issn 1359-6462, 6 p.Article

Instability of triple junctions in lamellar eutectic growthCHEN, Y.-J; DAVIS, S. H.Acta materialia. 2001, Vol 49, Num 8, pp 1363-1372, issn 1359-6454Article

Formation of layered Ag nanocrystallites in glasses via solid state diffusion processKO, M.-J; PLAWSKY, J.Journal of materials science letters. 1999, Vol 18, Num 24, pp 1985-1987, issn 0261-8028Article

Monte-Carlo simulation of directional growth of lamellar eutecticLIU, J.-M; WU, Z.-C; LIU, Z. G et al.Scripta materialia. 1998, Vol 38, Num 5, pp 715-722, issn 1359-6462Article

Influence of parameters of lamellar structure on the properties of the titanium alloy VT3-1BRUN, M.Ya; SHAKHANOVA, G.V; SOLDATENKO, I.V et al.Metallovedenie i termičeskaâ obrabotka metallov. 1986, Vol 32, Num 7, pp 52-55, issn 0026-0819Article

Interlamellar spacing in discontinuous precipitation = Lamellenabstand in der diskontinuierlichen AusscheidungSOLORZANO, I.G; PURDY, G.R.Metallurgical transactions. A, Physical metallurgy and materials science. 1984, Vol 15A, Num 6, pp 1055-1063, issn 0360-2133Article

Characterization and morphological analysis of pearlite in a eutectoid steelCABALLERO, F. G; GARCIA DE ANDRES, C; CAPDEVILA, C et al.Materials characterization. 2000, Vol 45, Num 2, pp 111-116, issn 1044-5803Article

Influence of lamellar orientation on fatigue crack propagation behavior in titanium aluminide TiAlSHIOTA, H; TOKAJI, K; OHTA, Y et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 1998, Vol 243, Num 1-2, pp 169-175, issn 0921-5093Conference Paper

Appraisal of recent work on role of crystallography in ferrous and non-ferrous pearliteWHITING, M. J; TSAKIROPOULOS, P.Materials science and technology. 1995, Vol 11, Num 8, pp 717-729, issn 0267-0836Conference Paper

Limite élastique des composites eutectiques lamellaires Al-CuAl₂ à haute températureGOTO, S; YAMASHITA, S; MIMURA, T et al.Nippon Kinzoku Gakkaishi (1952). 1984, Vol 48, Num 5, pp 513-521, issn 0021-4876Article

Obtaining bimodal microstructure in laser melting deposited Ti―5Al―5Mo―5V―1Cr―1Fe near β titanium alloyLIU, C. M; TIAN, X. J; WANG, H. M et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 609, pp 177-184, issn 0921-5093, 8 p.Article