Wear and thermal behaviour of CVD α-Al₂O₃ and MTCVD Ti(C,N) coatings during machiningM'SAOUBI, R; RUPPI, S.CIRP annals. 2009, Vol 58, Num 1, pp 57-60, issn 0007-8506, 4 p.Article

Role of phase and grain size on chip formation and material work hardening during machining of single and dual phase steelsM'SAOUBI, R; CHANDRASEKARAN, H.Ironmaking & steelmaking. 2004, Vol 31, Num 3, pp 258-264, issn 0301-9233, 7 p.Article

The influence of Johnson-Cook material constants on finite element simulation of machining of AISI 316L steelUMBRELLO, D; M'SAOUBI, R; OUTEIRO, J. C et al.International journal of machine tools & manufacture. 2007, Vol 47, Num 3-4, pp 462-470, issn 0890-6955, 9 p.Article

Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steelOUTEIRO, J. C; UMBRELLO, D; M'SAOUBI, R et al.International journal of machine tools & manufacture. 2006, Vol 46, Num 14, pp 1786-1794, issn 0890-6955, 9 p.Article

Innovative methods for the investigation of tool-chip adhesion and layer formation during machiningM'SAOUBI, R; CHANDRASEKARAN, H.CIRP annals. 2005, Vol 54, Num 1, pp 59-62, issn 0007-8506, 4 p.Conference Paper

Influence of tool nature and coating on the temperature distribution during chip formation in orthogonal cutting of steelsM'SAOUBI, R; LE CALVEZ, C; LEBRUN, J. L et al.Matériaux et techniques. 1997, Vol 85, Num 9-10, pp 37-42, issn 0032-6895Conference Paper

Improved machinability in hard milling and strategies for steel developmentCHANDRASEKARAN, H; M'SAOUBI, R.CIRP annals. 2006, Vol 55, Num 1, pp 93-96, issn 0007-8506, 4 p.Conference Paper

Anisotropy effects on microstructure and properties in decomposed arc evaporated Ti_1-xAl_xN coatings during metal cuttingJOESAAR, M. P. Johansson; NORRBY, N; ULLBRAND, J et al.Surface & coatings technology. 2013, Vol 235, pp 181-185, issn 0257-8972, 5 p.Article

Wear mechanisms of PVD-coated PCBN cutting toolsM'SAOUBI, R; JOHANSSON, M. P; ANDERSSON, J. M et al.Wear. 2013, Vol 302, Num 1-2, pp 1219-1229, issn 0043-1648, 11 p.Conference Paper

Ambient and elevated temperature properties of TiN, TiAIN and TiSiN PVD films and their impact on the cutting performance of coated carbide toolsBOUZAKIS, K.-D; SKORDARIS, G; GERARDIS, S et al.Surface & coatings technology. 2009, Vol 204, Num 6-7, pp 1061-1065, issn 0257-8972, 5 p.Conference Paper

Scratch adhesion characteristics of PVD TiAIN deposited on high speed steel, cemented carbide and PCBN substratesSVEEN, S; ANDERSSON, J. M; M'SAOUBI, R et al.Wear. 2013, Vol 308, Num 1-2, pp 133-141, issn 0043-1648, 9 p.Conference Paper

Surface integrity in material removal processes: Recent advancesJAWAHIR, I. S; BRINKSMEIER, E; M'SAOUBI, R et al.CIRP annals. 2011, Vol 60, Num 2, pp 603-626, issn 0007-8506, 24 p.Conference Paper

A numerical model incorporating the microstructure alteration for predicting residual stresses in hard machining of AISI 52100 steelUMBRELLO, D; OUTEIRO, J. C; M'SAOUBI, R et al.CIRP annals. 2010, Vol 59, Num 1, pp 113-116, issn 0007-8506, 4 p.Conference Paper

On The Measurement of Temperature in Material Removal ProcessesDAVIES, M. A; UEDA, T; M'SAOUBI, R et al.CIRP annals. 2007, Vol 56, Num 2, pp 581-604, issn 0007-8506, 24 p.Conference Paper

Analyse de l'état mécanique et microstructural des zones de frottement outil-copeau et outil-pièce en tournage = Mechanical and microstructural state analysis in tool- chip and tool- workpiece friction zones in turningCHANGEUX, B; M'SAOUBI, R; INAL, K et al.Matériaux et techniques. 1999, Vol 87, Num 5-6, pp 22-26, issn 0032-6895Conference Paper

Influence of the tool surface micro topography on the tribological characteristics in metal cutting: Part I experimental observations of contact conditionsFALLQVIST, M; SCHULTHEISS, F; M'SAOUBI, R et al.Wear. 2013, Vol 298-299, pp 87-98, issn 0043-1648, 12 p.Article

TOOL WEAR INFLUENCE ON WHITE AND DARK LAYERS IN HARD STEEL TURNINGATTANASIO, A; CAPPELLINI, C; CARUSO, S et al.Sciences de la matière. 2010, pp 171-180, issn 1272-2561, isbn 978-2-911256-27-1 978-2-911256-28-8, 2Vol, 10 p.Conference Paper

Thermal and microstructural analysis of orthogonal cutting of a low alloyed carbon steel using an infrared-charge-coupled device camera techniqueM'SAOUBI, R; LE CALVEZ, C; CHANGEUX, B et al.Proceedings of the Institution of Mechanical Engineers. Part B. Journal of engineering manufacture. 2002, Vol 216, Num 2, pp 153-165, issn 0954-4054Article

Analysis of the inverse identification of constitutive equations applied in orthogonal cutting processPUJANA, J; ARRAZOLA, P. J; M'SAOUBI, R et al.International journal of machine tools & manufacture. 2007, Vol 47, Num 14, pp 2153-2161, issn 0890-6955, 9 p.Article

Analyse thermique et métallurgique de la zone de frottement outil/copeau en coupe orthogonale = Thermal and metallurgical analysis of the chip/tool friction zone in orthogonal cuttingLE CALVEZ, C; M'SAOUBI, R; LEBRUN, J. L et al.Contact entre solides, frottement, endommagement, flux thermiques. Journée d'étude. 1996, pp 103-113Conference Paper

Effect of silicon content on PVD film mechanical properties and cutting performance of coated cemented carbide insertsBOUZAKIS, K.-D; BOUZAKIS, E; ANDERSSON, J. M et al.Surface & coatings technology. 2013, Vol 237, pp 379-389, issn 0257-8972, 11 p.Conference Paper

Analysis of residual stresses induced by dry turning of difficult-to-machine materialsOUTEIRO, J. C; PINA, J. C; M'SAOUBI, R et al.CIRP annals. 2008, Vol 57, Num 1, pp 77-80, issn 0007-8506, 4 p.Conference Paper

Tribological aspects of tool-chip and tool-work contact in machining and the application of laser spectrometryCHANDRASEKARAN, H; GRANFORS, M; M'SAOUBI, R et al.Wear. 2006, Vol 260, Num 3, pp 319-325, issn 0043-1648, 7 p.Conference Paper